Where is the best position for a wall mounted water conditioner to hang on the wall?

This should be decided according to the actual indoor situation, generally by the window.

The location of the indoor unit of the wall-mounted air conditioner needs to be selected, not blowing at the human body, not being directly irradiated by the sun, etc., after the selection, then the installation plate needs to be fixed. First of all, remove the mounting plate on the back of the indoor unit, and keep it level, pay attention to the size of the ceiling and the left and right walls, and the position of the mounting plate also needs to be fixed. The next step is to punch holes with bricks and fix them with screws, this process is not simple, you need to use a level to determine the level of the mounting plate.

The model of the wall-mounted water air conditioner is different, so when playing the drill bit, you need to choose the corresponding type of drill bit, you can use an electric hammer, you can also use rhinestones, etc., pay attention to not play in the place where there are wires in the wall, or the wall is particularly hard. Note that the position of the hole through the wall should be slightly lower than that of the indoor unit, so that it is convenient for future drainage. If it is a drill, pay attention to the use of plastic cloth to stick to the wall or use other methods to prevent water flow on the wall, and the electric hammer should be used to install a dust-free device.

According to the position of the air conditioner to be installed, determine the direction or position of the input pipe, so as to determine the left outlet, right outlet, left back outgo pipe or right back outlet, pay attention to the height of the connecting pipe should be designed, and the need to fix should also be fixed.

The power cord and signal cable need to be installed, placed on it, and bandaged, taking care not to use too much force or too loose. In many cases, the length of the drainage pipe is prone to be insufficient, and it needs to be lengthened at this time, and the connecting parts should be sealed well, and there can be no bending. The extended pipes also need to be fixed and the insulating material should be covered.

The last step of installing the hanging type of the indoor unit of the wall-mounted water air conditioner is to pass the wrapped pipes and connecting lines through the wall holes, which need to be hung at this time, and pay attention to the use of a level to measure whether the inner unit is level, and should also pay attention to the firmness, and there can be no upper shaking.

The above are the steps for the installation of wall-mounted water air conditioners, and the installation and operation are quite complicated. It is necessary to ask professionals to do this work, and the quality of installation should be strictly controlled. The installation is in place once it can reduce many unnecessary troubles in future use and can reduce maintenance costs.

Depending on how much power your air conditioner has, it is okay to install it at point B of the house with less than 2 horses, and it is okay to install it at point A of the big house if it is more than 2 horses. Generally speaking, a wall-mounted air conditioner may not be able to bring two rooms, and convection cannot be done very well. An air conditioner can only manage one room.

Point A is more suitable, both rooms have beds, and point B has beds, the space is small, easy to be blown by the air conditioner, the big house has a large space, installed, the cabin can also blow the wind, cool.

This wall-mounted air conditioner in your house is mainly used for refrigeration, if it is 2 rooms to take care of, it must be a suitable, and 2 rooms can enjoy air conditioning.

b, the air conditioning effect in that room will be better, but the air conditioning in the outside room will be greatly reduced.

1.Determine the installation location: First of all, you need to determine the installation location of the air conditioner, and generally choose the location where the air conditioner can cover the whole room and be close to the power line.

It is usually necessary to choose a sturdy, flat wall. 2.Mounting Bracket:

After adjusting the mounting bracket according to the size of the air conditioner and the specifications of the wall, make installation holes on the wall and install the bracket on the wall. <>

3.Install the indoor unit: Install the wall-mounted unit on the bracket and adjust the levelness.

The indoor unit needs to be tightly integrated with the bracket and is not allowed to shake. 4.Installing an outdoor unit:

To install an outdoor unit, you need to choose a suitable location, and give priority to a place with ventilation, dryness, and less direct sunlight. To install the outdoor unit, it is necessary to adjust the level on the horizontal plane to ensure the stability of the machine. 5.

Pipeline rental and sales connection: connect the pipelines of indoor and outdoor units. Attention should be paid to the direction, height, tightness and other liquid digging of the pipeline connection to avoid pipeline bending.

6.Fill the refrigerant: close the valve of the machine that is in the nucleus, pressurize the pipeline, and carry out the vacuum pump evacuation treatment and electrical wiring.

7.Install the control box: fix the control box on the wall, and connect the line working line, control line and signal line with the indoor unit.

8.Test the air conditioner: Turn on the power, start the air conditioner, and test.

Before the test, check whether all lines are firmly connected, whether the pipeline is leaking air and oil, whether the fan is running normally, whether the noise is too loud, etc. 9.Debug Run:

Organize all the tools and materials, and clean up the site. According to the user's requirements, the instruction manual is explained and the operation method is introduced, so as to use the air conditioner smoothly.