What flowers are good for deep ceramic flower pots?

It is very beautiful to plant some woody plants in high and deep pots, such as the fortune tree, the happiness tree, the large-leaved umbrella and other woody foliage plants.

Fortune tree breeding methods and precautions.

1. Suitable for soil.

In the cultivation methods and precautions of the fortune tree, it is necessary to provide suitable soil for it, so that it can grow better. Usually choose to mix garden soil, humus soil and river sand in equal amounts, or prepare peat soil and river sand in a 1:1 ratio.

2. Water properly.

Cultivating fortune trees should be properly watered to provide them with sufficient water to make them thrive. Usually watered once a week in spring and autumn, watered once every 2 or 3 days in summer with high temperatures, and once in about half a month in winter, do not water too much and cause water accumulation.

3. Reasonable fertilization.

Reasonable fertilization provides nutrients for the fortune tree, so that the fortune tree can be better raised. Generally, in its growth period, it is necessary to apply a thin Bika water-soluble fertilizer solution for about 20 days to make its leaves grow more vigorously, but pay attention not to excessive fertilizer when fertilizing to prevent thick fertilizer from burning roots.

4. Sufficient light.

When cultivating the fortune tree, we should also pay attention to providing it with sufficient light, so that it can photosynthesize and grow healthily. It can be treated with full sunlight when it is maintained outdoors, but when it is maintained indoors, it is necessary to avoid direct sunlight and do a good job of shading and sun protection in time.

5. The temperature is suitable.

Providing a suitable temperature environment can also allow the fortune tree to grow normally during the breeding process. It is necessary to control the growth temperature of the fortune tree above 20 to provide a warm environment so that the fortune tree can grow rapidly, and pay attention to avoid the occurrence of low temperature environment below 5.

According to the use experience, deep ceramic flower pots are not suitable for planting dwarf flowers or cuttings or other flower seedlings, other flower seedlings can be planted, but at the bottom of the ceramic flower pot, more charcoal or broken wood blocks or dead bark are needed to facilitate drainage and ventilation to prevent root rot.

No matter what kind of flowers you raise, you need a pots that are breathable. Planted in pots with good ventilation and breathability, the plants can breathe freely and grow better.

I recommend using ceramic pots because they are more breathable than porcelain pots. No matter what kind of greenery you are planting, such as pothos, coin grass or small, sprouty succulents, these clay pots are the best choice. Moreover, the appearance of the pottery flower pot is also very high, and you can also freely paint on it to show your creative talent.

Ceramic pots have high air permeability, so the plants cultivated in this kind of pots can be watered by soaking pots, which is very convenient. Reduce direct watering on the roots of the plant, water does not volatilize in time caused by leaf black rot and root rot.

To sum up, it is recommended to use ceramic flower pots for raising flowers, the reason: such flower pots are more breathable, it's as simple as that.

As far as my experience is concerned, although the porcelain pot is good-looking, but the air permeability is not very good, the same soil to raise succulents, in the case of sufficient light, the terracotta pot may be watered for about 3 days to dry out, the stoneware pot can be dried for about 5-7 days, and the porcelain pot must have at least 10 days or more potting soil to be completely dry. Therefore, if the subject is a novice with no maintenance experience, it is best not to choose to use porcelain pots to raise flowers, especially succulents, otherwise if you can't grasp the frequency and amount of watering, it is easy to cause them to rot roots and black rot.

If we have some maintenance experience, then we can adjust the proportion of permeable medium in the soil and control the watering frequency to make the flowers in the porcelain pot grow normally. Like the sea ice Gresánchez I raised above, a large number of particles such as volcanic stone and maifan stone are added to the soil to improve drainage and air permeability, and the frequency of watering is also very long, I generally water it once in about 15-20 days in spring, and I often water it once in about 1-2 months in winter, of course, the final effect is also visible to the naked eye.

In short, for novice friends, no matter what flowers you plant, it is recommended that you use clay pots, which will not only be easier to water, but also have less chance of flower problems. And for friends who have some maintenance experience, it doesn't matter, even if the porcelain pot is not breathable, we can also adjust the soil environment and watering methods to let the flowers grow normally, as long as there are pots in hand, we don't want to waste, and making full use of them is the king.

The clay pot is the legendary flower pot that breathes, super breathable, and it is not an exaggeration to water it three times a day! In the past, there was no market for pottery pots to be calcined in small kilns, since the last century, Europe, America, Japan and South Korea began to introduce them into the home green plant must be selected flower pots, one after another large pottery pot manufacturers began mass production, and coupled with innovation, the shape is changeable, and the process is constantly improved.

The choice of pottery pots is more and more diverse, how to choose, what are the differences, advantages and disadvantages and what flowers and plants are suitable for, these problems should still be done in advance, so as not to appear in the clay pot meat is not fat or encounter the pot on the long "white hair" at a loss of panic!

Although they are all clay pots, they are very different!

For the pottery pot squirrel gentleman tends to be divided into three categories, especially suitable for the use of the north called "stoneware pot", the use of more sandy clay, the temperature is relatively low when calcining, the surface does not form vitreous, the surface looks very rough.

The second is to use a finer clay with the same calcination temperature as the first one, but it looks delicate, but it is not smooth and does not reflect. This kind of pottery pot is called "red pottery pot" on the market, and the pottery pot is selected as "northern stoneware, southern red pottery".

This kind of potted plant is suitable for planting water-tolerant potted plants, such as bamboo plants and bamboo shoot plants, which are generally used to grow large plants and placed at the door of the house to decorate the greening at the door.

Ceramics are processed with a variety of clay, and then heated and smelted at high temperatures, and this kind of ceramic pots are generally not suitable for planting flowers, because the permeability is not so good, and the air permeability effect is not so good.

Flower pots are planted in various forms and sizes, and flower producers or flower growers can choose flower pots according to the characteristics and needs of the flowers and the characteristics of the flower pots.

Due to the poor air permeability of the porcelain pot, it is generally not directly used to raise flowers, but as a part of the ornamentality, the raised flowers are transplanted into it to increase ornamental and hygiene.

If it is used to raise flowers, it is better to choose some plants that are resistant to water and moisture, such as dwarf ornamental bamboo, Araceae plants, ferns, arrowroot, hanging bamboo plum, etc.

Peace tree, rubber tree, Milan, gardenia, fortune tree, can be, in general, it is dry and watered, and it is better to see dry and wet.

1. Orchids, ceramic pots are suitable for orchids with deep roots. 2. Celandine, like moisture, strong light, and strong cold resistance. 3. Buttercups are generally born in fields, wetlands and damp grasses.

3. Violet flowers, suitable for growing in sandy loam soil with sufficient water and fertility. 5. Cuiluli has strong drought tolerance and moisture tolerance, and is suitable for planting in ceramic pots.

1. Orchids

Ceramic pots are suitable for raising flower plants with deep roots, such as orchids, which are epiphytic or terrestrial herbaceous flowers, and prefer fertile and soft soils rich in humus, and avoid direct sunlight.

2. Celandine

The other name of celandine is water branch willow, water willow, lotus to the leaves, the flower color is mainly reddish-purple, lavender, the flowering period is 6-10 months, the plant likes water and moisture, strong light, cold tolerance is strong, suitable for potting with ceramic pots.

3. Buttercup

Ranunculaceae perennial herb, flower color red, white, orange, plants like shade and dampness, generally born in fields, wetlands, river banks, ditches and damp grass, avoid using clay soil planting.

4. Violet flowers

Violet is an annual gray-green herb with nearly triangular leaves, which prefers warm, moist environments, and is suitable for growing in well-watered, fertile sandy loam soils, and can be potted in ceramic pots.

5, Cui Luli

It has strong stress resistance, wide adaptability, drought tolerance and moisture tolerance, suitable for planting in ceramic pots, and the plant likes high temperature environment, and it is appropriate to take full sunshine or half sunshine during the growth period.

Ceramic potted flowers.

Ceramic basin features.

Ceramic pots have good wear and corrosion resistance. Growing flowers in this pot can also improve the ornamental value of the flower itself.

Ceramic pots are suitable for flower varieties.

Ceramic pots are generally relatively large and can raise deep-rooted flowers and plants, such as orchids. When orchids are planted in ceramic pots, they have a larger internal space that allows them to grow better.

Ceramic potted plants.

Ceramic pots can support plants with deep roots, such as Araceae, arrowroot root, fern, etc. It loves water and humidity. Their rotten and rotten roots are very thick, and some have many fibrous roots. Clay pots have a lot of room to grow.

Precautions for raising flowers in ceramic pots.

1.First of all, it is necessary to pay attention to the drainage in the ceramic basin. If there are drainage holes in the bottom of the pan, no problem.

If not, you need to pad the pot with a substrate of large particles to avoid hunger and shivering. 2.Pay attention to water control in daily maintenance, do not water too much, otherwise you need to drain and loosen the soil.

3.It is necessary to ensure good air circulation, which is very helpful for water evaporation and plant ventilation.

Ceramic pots for flowers.

Ceramic flower pot features:

Ceramic flower pots are characterized by good thermal stability, good wear resistance, high mechanical strength, good corrosion resistance, environmental protection and pollution-free, rich raw materials, low cost, good water retention, and can provide a relatively humid growth environment for flowers for a long time.

Ceramic pots are suitable for flower varieties.

Ceramic pots are suitable for gardenias, Milanese, saxifolia, dwarf ornamental bamboo, desmodium, mint. Because these flowers are suitable for growing in humid environments, raising these flowers in ceramic pots can promote their better growth.

Ceramic potted plants.

Ceramic flower pots are suitable for raising a flat tree, a rubber tree and a fortune tree. Keeping these plants in ceramic pots can make them grow more lush. Qi Zhi.

Precautions for raising flowers in ceramic pots.

Ceramic pots need to be paid attention to raising flowers. Ceramic flower pots are fragile and have poor drainage and air permeability. Therefore, when watering, you must not accumulate water, otherwise it will not be conducive to the growth of flowers.

Ceramic pots for flowers.

Ceramic flower pot features:

Ceramic flower pots are characterized by good thermal stability, good wear resistance, high mechanical strength, good corrosion resistance, environmental protection and pollution-free, rich raw materials, low cost, good water retention, and can provide a relatively humid growth environment for flowers for a long time.

Ceramic pots are suitable for flower varieties.

Ceramic flower pots are suitable for gardenias, Milan, tiger orchids, dwarf ornamental bamboos, Jinju Nianqian grass, and mint. Because these flowers are suitable for growing in a humid environment, raising these flowers in Qizhi ceramic pots can promote their better growth.

Ceramic potted plants.

Ceramic flower pots are suitable for raising plants such as peace trees, rubber trees, and fortune trees. Keeping these plants in ceramic pots can make them grow more lush.

Precautions for raising flowers in ceramic pots.

Ceramic pots need to be paid attention to raising flowers. Ceramic flower pots are fragile and have poor drainage and air permeability. Therefore, water must not accumulate when watering, otherwise it is not conducive to the growth of flowers.