What should I do if the stool keeps ringing? What s going on with the computer chair ringing all the

Updated on healthy 2024-07-14
15 answers
  1. Anonymous users2024-02-12

    If the stool keeps ringing, it may be loose, you can squeeze it in with a proper tool, or you can put two pieces of film under the stool, so that when he and I can't wipe it, there will be no sound.

  2. Anonymous users2024-02-11

    The stool keeps ringing the solution:

    1. If the bearing part of the chair is rusted, it can be solved by squeezing some lubricating oil into the bearing or the rotating shaft.

    2. If the chair is loose for a long time, the loose part is caused by friction, and a wrench is used.

    Tighten the screw part and it will be solved.

    3. It may also be that the chair is damaged, etc., which should be repaired according to the degree of damage and the damaged part, if the value of the chair is not large, it is recommended to replace the chair with a new one.

    4. There is a reason for the habit of sitting with a person, don't shake often when you sit up, and the sound will naturally be gone.

  3. Anonymous users2024-02-10

    This condition is supposed to be caused by a loose leg of the stool, which can be fixed with a nail. If you still can't change it after fixing, then you can only buy a new one.

  4. Anonymous users2024-02-09

    1. Check that there is looseness, or missing parts, etc. If it is loose, tighten it with a tool, and if there are fewer parts, you can buy it, and then go to a professional master to install it.

    2. It may be aging.

  5. Anonymous users2024-02-08

    What should I do if the stool keeps ringing? That's the stool. Loose screws are loose. It might be better to tighten the screws.

  6. Anonymous users2024-02-07

    What should I do if the stool keeps ringing? If it's really troublesome at work, then you can only consider changing the stool.

  7. Anonymous users2024-02-06

    Then go for another one and adjust it well.

  8. Anonymous users2024-02-05

    What does the stool teacher want to do, you should repair the stool, which is loose, you should add a lid.

  9. Anonymous users2024-02-04

    The screws are loosened and turned over to tighten.

  10. Anonymous users2024-02-03

    Drop a little water into the connection of several parts that will rotate relatively quickly, and find the right part when it doesn't sound, and then drop a little oil when the water is dry.

  11. Anonymous users2024-02-02

    I have experience with this, first of all, you have to determine the exact place where the sound is, usually at the junction of the components; Then find something similar to a sweater needle, and put one end into the place where the sound sounds; Use engine oil (there are cars available, and points are important to repair cars if you don't have a car) drop a few drops along the sweater needle, lie down and shake it again until it doesn't sound.

  12. Anonymous users2024-02-01

    This one is very simple, it is the reason why the screws are loose somewhere, you just need to tighten all the screws, with pliers, boards or screwdrivers, to solve the problem.

    This kind of problem arises, after the seat is used for a long time, the screws will become loose due to the frequent shaking of the chair, resulting in loose joints, and after being subjected to pressure, the joints will produce dislocation friction, because most of them are metallic, so when rubbing, there will be a squeaky sound.

  13. Anonymous users2024-01-31

    Generally, the screws are loose.

    It's good to tighten it (pro-test).

  14. Anonymous users2024-01-30

    Fix it, it's better to change it...

  15. Anonymous users2024-01-29

    The solution to the squeaky squeak of the chair:

    1. Check that there is looseness, or missing parts, etc. If it is loose, tighten it with a tool, and if there are fewer parts, you can buy it with a god, and then go to a professional master to install it.

    2. It may be aging, you can drop some oil or lubricating oil on the rotating part of the swivel chair, and the friction will not sound.

    For some corners that have not yet been damaged, use raw tung oil, shellac paint or varnish and other coatings to paint the front and back of the wooden cabinet and the inner wall of the wooden cabinet evenly, so that the moth is isolated from the air and achieve the purpose of mothproof.

    You can use dichlorvos and water in a ratio of 1 5 to prepare the liquid medicine, spray it with a sprayer, let the liquid infiltrate into the wooden cabinet, spray it 3 times 5 times in a row, after 8 hours, it can kill all the moths. After that, wash the wooden cabinet with clean water and dry it.

Related questions
19 answers2024-07-14

The noise is too loud, and there are two major places.

A case power supply fan, you can change to a 12cm large-diameter fan, which can also be said to be a silent version. >>>More

9 answers2024-07-14

What kind of sound is it? If it is an intermittent "click" sound (the sound is soft), it may be the sound of the hard disk reading, and you can't do anything about it, except for the backup of important files, you can ignore it. The optical drive sometimes emits sound, but there is no sound when the optical drive is not working. >>>More

15 answers2024-07-14

If it's because of the door hinge.

Rust causes a creaking sound, then directly on the door axle hinges. >>>More

14 answers2024-07-14

First of all, we need to prepare the tools that may be used, a word to change the cone, a T-20 spline, and need to prepare the vehicle maintenance to use the car rust inhibitor, butter, and then, let's start the wonderful solution process. Abnormal noise caused by the wiring harness inside the door striking the door panel. When the vehicle is driving on a bumpy road, it may cause the wiring harness inside the door to hit the door panel, so that there will be waves of noise, what we have to do is to disassemble the door trim panel, and then fix the wiring harness inside, it is best to find a small sponge, and then stick the ** bundle on the door panel, so that the wiring harness will hit the sponge, and there will be no noise. >>>More

20 answers2024-07-14

Dust is getting in the fan! You open the case! Just wipe the dust off or blow it off with a little blowing! Be careful not to put the case in a dusty place when you usually use it! Old can be gone!