What should I do if there is always an abnormal sound when the anti theft door is opened?

If it's because of the door hinge.

Rust causes a creaking sound, then directly on the door axle hinges.

drop some lubricating oil, and then let it be fully lubricated, and leave it for 10 minutes. If the gap between the anti-theft door and the door frame is too small or the anti-theft door is not parallel to the edge of the door frame, then directly remove the anti-theft door, ask a professional master to reinstall it again, and try to make the door gap in a moderate position.

1. What should I do if the anti-theft door squeaks when it is opened and closed?

1. If it is because the door hinge is rusty and squeaks, drop some lubricating oil directly on the door shaft hinge, and then let it be fully lubricated, and wait for 10 minutes;

2. If the gap between the anti-theft door and the door frame is too small or the anti-theft door is not parallel to the edge of the door frame, then directly remove the anti-theft door, ask the professional master to reinstall it again, and try to make the door gap in a moderate position.

2. What is the reason for the creak when the anti-theft door opens and closes, and what is the solution?

1. Debris interference.

One reason has to do with the security door hinges. When there are debris around the hinge of the security door, it will affect the normal use of the hinge of the security door. When the security door is closed, debris will cause the security door hinge to be deformed due to impact.

If the hinge of the security door is deformed, there will be abnormal friction between the security door and the door frame.

2. Spacing issues.

There is also a problem during installation, the gap between the security door and the door frame is too small, or the security door door face is not parallel to the edge of the door frame. This can also cause abnormal friction between the security door and the door frame.

3. Excessive strength.

Although the security door is vandal-resistant, it does not mean that too much violence will not cause damage to the security door. When we open and close the door too hard, it will cause the hinge of the security door to be strongly impacted, which will cause the door surface or door frame of the security door to be out of normal position. There will be abnormal friction between the security door and the door frame.

Here's how to fix it:

1. Lubricating oil.

The squeak when opening the security door is caused by the rust on the hinge after the security door has been used for too long. It is recommended to apply lubricating oil on the security door hinge for regular maintenance. Equipped with an anti-theft lock, it can resist abnormal opening under certain conditions within a certain period of time, and has a certain safety protection performance and meets the corresponding anti-theft security level.

2. Wooden strips. There is also a simple way, directly put the wooden strip at the friction place, and gradually apply pressure to it when closing the door, which can solve the abnormal friction between the security door and the door frame.

3. The interval is appropriate.

The security door façade is appropriately spaced from the door frame. In order to achieve the right distance between the façade and the door frame of the security door, we need to use a wrench.

Adjust the hinge screws of the anti-theft door according to the actual situation. It can also widen the distance between the façade of the anti-theft door and the door frame. At this time, we need to adjust the screws on both sides of the door frame of the security door (expansion screws.

Fixed security door), you can widen the gap between the door face and the door frame.

1) Due to the humidity of the air or the dust entering the hinge box, the hinge and the hinge pin friction produce a sound. 2) The hinge screw is not properly adjusted, and the hinge bolt is not on the same axis. 3) The hinge fixing screws are not tightened, and the hinges of the door are offset to different axes under the action of gravity during use.

Suggested solution: In the first case, the hinge pin can be filled with a professional liquid lubricant or butter. Note! Never use animal or vegetable oils (such as lard, soybean oil, etc.) as lubricants; Clause.

In the second and third cases, adjust the hinge screws so that the hinge bolts are on the same axis (for example, the two screws of the hinge in the middle of the door frame can be properly relaxed).

The hinge of the door is oiled.

There is always an abnormal sound when the anti-theft door is opened, you can spray some lubricating oil on the hinge...

1. If you don't adjust it, apply wax (or soap or grease) between the friction door frame and the door panel, which can relieve the rattling sound, but you have to re-apply the wax after half a year.

2. If the new door does not sound when it is installed, there is a sound after using it for a period of time. It may be that the door panel is overopened when opening the door, and the angle between the hinge and the door panel is deformed, the adjustment method is to open the door, use a screwdriver (or screwdriver handle) to insert it into the large gap between the hinge and the door frame below, and slowly close the door.

3. Adjust the adjustable hinge, loosen the five small screws of the hinge, turn the eccentric screw in the middle, and turn it to the gap you want. If the gap is not enough, stuff something between the door panel and the door frame, pull it out after the adjustment is completed, adjust it after a few times, and finally tighten all the screws.

The door rings need to be confirmed to be ** ringing, and there are two common fault points that need to be carefully identified:

1. Door hinge ringing: As the door opens or closes, it has been ringing, which is caused by the lack of oil in the hinge.

2. Ring under the threshold: only when the door opens or closes and touches the threshold, this is the door sagging, you can find a way to knock the bottom edge of the door up with a hammer, so that it will not touch the threshold, and the sound will naturally be gone.

Or loosen the hinge bolt of the door, use the lever to jack the door up, and then tighten the hinge bolt to improve the position of the door.

There is a certain technical difficulty in identifying the sound point and dealing with it, if you don't have the ability to implement it, you can find someone to deal with it.

When you find that the anti-theft door makes an abnormal noise, you should check the source of the **. It may be that when the door is opened and closed, there is a sound at its hinges, because the hinges or hinges of some security doors will be deformed after being strongly impacted, which will cause friction and sound.

It is also possible that there is a problem during installation, such as if the gap between the anti-theft door leaf and the door frame is relatively small, or the edge of the door frame is uneven during installation, it will cause abnormal friction.

The anti-theft door has been vigorously damaged, such as usually, when the door is closed, do not pay attention, and close the door vigorously, it will lead to irregular door frames, and there may be a problem of moving downward, which is the most likely to produce abnormal noise.

The door fan and the door frame are extruded, and the general side hinge can see whether there are friction marks, and the level is not found well or fixed to be oiled at the friction place, and the air is adjusted too small There will be a sound, so it is recommended to adjust the lower gap.

The security door creaks and adds some lubrication.

1. The fan and the door frame of the door are extruded, and the friction marks can be seen in the side hinge.

There is a sound in the anti-theft door, and the gap between the door locks of the anti-theft door should be adjusted.

1. If it is due to humid air or dust entering the hinge box, the hinge and the hinge pin rub friction will produce a sound. The solution is to inject a professional liquid lubricant or butter into the hinge pins.

2. If the hinge screw is improperly adjusted, the hinge bolt is not on the same axis. Or the hinge fixing screw is not tightened, and the hinge of the door is offset by different axes under the action of gravity during use, and the solution is to adjust the hinge screw so that the hinge bolt can be on the same axis, such as: the two screws of the hinge in the middle of the door frame are properly relaxed.

Summary. Dear, hello, I am happy to answer for you: the solution to the alarm door ringing for no reason is as follows:

The door of the security door slammed, this problem depends on the specific situation. In the home with an anti-theft door, there will be this situation, that is, when the door is opened, the anti-theft door will make a banging sound. In fact, this situation is the sound of the door lock of the anti-theft door being opened, because the door lock of the anti-theft door has nearly ten or so deadbolts and left and right deadbolts, and these deadbolts are relatively thick metal parts, when these deadbolts are locked or opened in the process, there is a certain strength, so in the process of opening, there will be a banging sound.

This phenomenon is a normal phenomenon.

What should I do if the security door rings for no reason.

Dear, hello, I am glad to answer for you: the solution to the sound of the anti-theft door for no reason is as follows: the anti-theft door opens the door and slams, this problem depends on the specific situation.

In the home with an anti-theft door, there will be this situation, that is, when the door is opened, the anti-theft door will make a banging sound. In fact, this situation is the sound of the door lock of the anti-theft door being opened, because the door lock of the anti-theft door has nearly ten or so deadbolts and left and right deadbolts, and these deadbolts are relatively thick metal parts, when these deadbolts are locked or opened in the process, there is a certain strength, so in the process of opening, there will be a banging sound. This phenomenon is a normal phenomenon.

Not the sound of a lock.

1. Generally speaking, the bearing on the hinge is broken, you can add some lubricating oil to try it, if it still doesn't work, find a manufacturer to replace the bearing on the hinge; 2. The gap between the door leaf and the door frame is too small, use an Allen wrench to adjust the gap, not too much force, and slowly adjust it in place; 3. If the use time is too long, you can consider replacing an anti-theft door.

1. Generally speaking, the bearing on the hinge is broken, you can add some lubricating oil to try it, if it still doesn't work, find a manufacturer to replace the bearing on the hinge; 2. The gap between the door leaf and the door frame is too small, use an Allen wrench to adjust the gap, not too much force, and slowly adjust it in place; 3. If the use time is too long, you can consider replacing an anti-theft door.

The creak of the security door opening and closing may be caused by excessive friction between the door frame and the door leaf, or the fit between the door leaf and the door lock is not tight enough. Here are some workarounds:1

Apply lubricating oil: The gear beam applies some lubricating oil between the door frame and the door running fan, which can reduce the friction between the door leaf and the door frame and make the door opening and closing smoother. Rent search 2

Adjust the position of the door leaf: If the gap between the door leaf and the door frame is too large, you can adjust the position of the door leaf to make it more suitable for the door frame and reduce friction. 3.

Replace the door lock: If the fit between the door leaf and the door lock is not close enough, you can consider replacing the door lock and choose a more suitable door lock. 4.

Adjust the door frame: If the door frame is uneven or deformed, it will also cause the door to switch unsmoothly, you can consider adjusting the door frame or replacing the door frame. If none of the above methods can solve the problem, it is recommended to contact a professional door and window repair company for inspection and repair.

If your security door switch is ringing, it may be caused by the following reasons:

1.Loose Door Lock: A loose door lock or an overly tight lever spring will cause the switch to ring, and the lever spring will need to be re-fixed or adjusted.

2.Poor switch contact: Poor switch contact can also cause the switch to ring, and the switch needs to be cleaned or replaced.

3.Foreign objects on the door lock: Abnormal bridge and land objects on the door lock will also cause the switch to sound, and the foreign object on the door lock needs to be cleaned up.

Solution:1Check the door lock: Check if the door lock is loose, if it is loose, you can re-fix or adjust the bar bench spring.

2.Clean the switch: If the switch is in poor contact, you can try to clean the switch first. Use a cotton swab dipped in a small amount of alcohol or detergent to clean the switch contacts.

3.Clean the door lock: If there is a foreign object on the door lock, you can use pointed pliers or a thin metal hook to clean the foreign object on the door lock.

If the above methods do not work, it is recommended to contact a professional maintenance personnel for replacement or repair.

In modern homes, the anti-theft door is a must-have, basically every family will install the anti-theft door, the anti-theft door is better than other doors in terms of quality, but the anti-theft door has been used for a long time, it is prone to some problems, such as the door card owner, the door opening has an abnormal sound, etc., so what is the squeak when the anti-theft door opens and closes? Let's take a look with Qeeka Home experts.

1. What is the squeak when the anti-theft door opens and closes.

The squeak when the door is opened and closed is generally caused by rust on the hinge, you can smear some lubricating oil on the hinge of the anti-theft door, usually if there is regular maintenance, there will be no problems, in addition, it may be caused by loose adhesive strips, hinges, etc., which need to be laughed at and reinstalled to solve the hinge.

Second, how to buy a household security door.

1. Ask about the thickness.

When buying an anti-theft door, you need to pay attention to the actual thickness of the door body plate, which is generally seen with the naked eye, you can ask the shopping guide, how thick the door plate is, if the plate is lower than that, it can not be purchased, this thickness of the anti-theft door is easy to be destroyed, there is no security guarantee.

2. Press the door.

It is not enough to ask the thickness of the plate, you need to touch the lead to sell it yourself, you can use your hands to press the door frame, edge and other positions, to feel the advantages and disadvantages of the door material, the general pressure is resistant, indicating that the quality of the plate is better, if it is particularly easy to press, the quality of the plate is definitely not very good.

3. Look at the key.

The anti-theft function of the anti-theft door is not only manifested in the quality of the door body, but also in the door lock, that is, to configure the door lock with strong anti-theft function, generally speaking, the anti-theft level of the anti-theft door is also judged by the door lock level, and the anti-theft ability of the door lock can be seen from the good configuration of the key.

Summary: The above is an introduction to what is going on when the anti-theft door opens and closes the door, I hope the content shared can give you some reference, if you want to know more about relevant knowledge, you can **** Qijia Home to consult.