When cultivating anthurium at home, how to promote flowering?

Anthurium is native to South America, likes a warm and humid and well-drained semi-shady environment, is afraid of drought and strong light exposure, and is suitable for growing at a day temperature of 26-32 and a night temperature of 21-32. The maximum temperature that can be tolerated is 35 and the low temperature that can be tolerated is 14. Anthurium has one leaf and one flower, as long as there are healthy new leaves growing, and reasonable maintenance when the new leaves are ripe, flower buds can grow.

If there are no new leaves growing, only old dark green leaves that have already aged, no matter how much work is done, they will not bloom.

<> watering should not be too much, so that it can accumulate water and be easy to soak to death. Wait until the pot is depleted of water before watering. Turn the pot from time to time to let the flowers receive sunlight evenly to avoid the flowers from appearing dark blue-yellow.

There will also be a lack of photosynthetic products, the leaves will be yellow, and the plant will not grow well and it will be difficult to flower, so it is recommended to put it in a bright place to maintain it to promote the flowering of anthurium.

When the anthurium is usually watered, it can be watered along the potting soil with thin cake fertilizer water. In spring or autumn, when you need to promote flowering, you need to use potassium dihydrogen phosphate mixed with water and irrigate every 15 days or so, as long as the plant grows normally, you can squeeze out the flowers after about a month. Spray the leaves with potassium dihydrogen phosphate solution once a day, once in the morning and once in the evening.

When watering, add a drop of nutrient solution to the water, which will make the pregnant buds bloom better and faster. So between the right temperature zones, especially in winter, don't let the temperature drop below 5, it's best to keep the temperature around 15 so that the anthurium can form flower buds.

The need for light is better. If you want Anthurium to have a better growth, let it bloom earlier, and the flowering period will last longer, then it must be given sufficient light conditions when it grows. So between the right temperature zones, especially in winter, don't let the temperature drop below 5, it's best to keep the temperature around 15 so that the anthurium can form flower buds.

Do a good job of insect and disease prevention and put it in a ventilated place for maintenance. In addition, anthurium should also apply some water and fertilizer, drop one or two drops into it when watering, once every 3-5 days, and once every half a month in winter.

In the maintenance of potted anthurium, as long as it is given a suitable growth environment, a relatively stable temperature difference, a grasp of soil moisture, and reasonable fertilization, as long as this skill is mastered, the anthurium can grow more and more prosperous, and the flowering continues.

1. Increase the temperature.

Generally speaking, the temperature suitable for anthurium flowering is between 15 and 25 degrees, too high or too low will cause flower buds to fail to form, affecting flowering. Therefore, if you want it to bloom normally or early, you need to control the temperature, especially in winter. During the breeding period, the temperature should not be lower than 5 degrees, and should be controlled above 15 degrees, which can promote the formation of flower buds.

2. Reduce watering.

During the maintenance period, the number of watering should be controlled, if the watering is too frequent, it will affect the growth of the root system and cause damage. The number of watering should be changed according to the specific environment of the plant, and it is best to wait for the soil to dry out before replenishing the water in time. In addition, let the plants bask in the sun before watering, so that the water can be better absorbed.

3. Sufficient light.

It loves light, but is afraid of scattered light, so avoid strong light and sunburn during maintenance. It should be placed indoors in a place with astigmatism, and ensure that there is enough time to see the light, more than 8 hours a day, so that the flower buds can be better formed.

We should add some good fertilizers, and we should add some nutrient solutions, so that we can promote flowering, and the effect will be very good.

Usually fertilize and water the flowers, and bask in the sun regularly, the flowers will bloom faster.

Anthurium home cultivation method, choose ceramic pots, add loose and breathable soil, and enhance soil permeability. Pay attention to the frequency of watering, watering once every three days in spring and autumn, once a day in summer, and once a week in winter. Pay attention to the growth temperature between 19 and 25, do a good job of warming in winter, and use river water and well water for watering.

1. Soil. Anthurium can be maintained in ceramic pots, which have good ventilation and drainage, which is convenient for the growth of anthurium. Fertile and loose soil needs to be selected, some small ceramsite and dry bark can be added to enhance soil permeability and nutrients, and the soil can be disinfected with potassium permanganate solution before use. To supplement soil nutrients, you can also choose a fertile leaf microbial agent.

2. Moisture. 3. Illumination.

The suitable growth temperature of anthurium is between 19 and 25, and the warm environment will promote the growth and development of anthurium. In summer, the light is strong, so you need to protect the anthurium in the shade, and put it in a ventilated and cool place to maintain, as long as there is sunlight scattering. Anthurium is not cold-tolerant, the temperature should not be lower than 10, and the temperature should be warmed in winter to avoid frostbite.

Precautions. Anthurium has certain requirements for water quality, and river water or well water should be used. If the water is acidic, it will cause the flower stems of the anthurium to become shorter, which will affect the aesthetics. If you only have tap water, you can leave the prepared tap water for about four days to remove the nitrogen in it, and you can also water the anthurium well.

Here's how to make anthuriums bloom again:

Anthurium likes high temperatures, especially in winter, when it is above 15 degrees indoors and is watered when it is dry.

Anthurium likes fertilizer, this watering, next watering, the concentration of one thousandth, nitrogen, phosphorus and potassium each 20 most, a leaf and a flower bloom all year round.

Anthurium is a perennial evergreen herbaceous flower, which likes a warm and humid environment with good drainage, is afraid of drought and strong light exposure, and its suitable day temperature is 26 32, and the night temperature is 21 32.

The maximum temperature that can be tolerated is 35, the tolerable low temperature is 14, the light intensity is 16000 20000 lx, and the relative humidity (RH) of the air is 70% 80%.

Its plant height is generally 50 80cm, varies from variety to variety, with fleshy roots, stemless, leaves drawn from rhizomes, with long stalks, solitary, heart-shaped, bright green, leaf veins concave, flower axils, Buddha flame bracts waxy, round to oval, bright red, orange-red flesh-colored, white, fleshy spikes, cylindrical, erect, flowering in all seasons.

Anthurium has a "skill" to promote flowers, and after using this "method", the flowers will bloom undefeated for 100 days.

<>1. Heating treatment.

Anthurium likes a warm environment, the most suitable growth temperature is between 15-25 degrees, the temperature is too low or too high, will inhibit the differentiation of flower buds, resulting in the anthurium can not bloom, so in the process of flowering, the ambient temperature should be kept above 20 degrees, and the temperature should not be lower than 15 degrees in winter.

2. Provide light.

Anthurium likes light, in the process of breeding, long-term in the dark corner, it will affect the development and blooming of flower buds, so in the later management, to provide more than 8 hours of light for anthurium every day, which is conducive to the formation of flower buds, but the plant is afraid of strong Dan staring at Zen light, and shading measures should be taken in summer to avoid sunburn of flower buds.

3. Spray liquid fertilizer.

If you want to make the anthurium bloom as soon as possible, you can spray potassium dihydrogen phosphate on the branches and leaves once a day to promote the flower bud cultivation and differentiation of the plant, and in the process of watering the anthurium, the nutrient solution should be mixed into the water, so that the plant can absorb more nutrients and promote the flower buds to bloom as soon as possible.

If you want Anthurium to bloom quickly, you need to control the temperature between 15 and 25, reduce the number of watering, wait until the soil shows signs of drying out before watering, usually place astigmatism, ensure 8 hours of light time every day, and spray potassium dihydrogen phosphate solution on the leaves in the morning and evening, so that Anthurium can quickly sprout buds and flower.

The temperature suitable for anthurium flowering is between 15 and 25, otherwise the temperature is too high or too low will make it difficult for the anthurium to give birth to flower buds, so between the right temperature areas, especially in winter, do not let the temperature fall below 5, it is best to maintain the temperature at about 15, so that the anthurium can form flower buds.

Anthurium flowering method needs to reduce the number of watering, too much watering, will cause damage to the roots of the anthurium, so according to the anthurium itself in the environmental conditions to adjust the number of watering, it is best to wait until the soil has a tendency to dry out before watering, before watering, you need to put the water in the sun to dry for a while.

If you want to flower, you need to place it in a scattered place, avoid strong light for irradiation, the sun at noon in summer is too strong, you need to carry out shading and sunscreen treatment, it is best to put it indoors to breed, give more than 8 hours of light time every day, which is conducive to the formation of flower buds in anthurium.

Spraying potassium dihydrogen phosphate solution on the leaves can make the anthurium buds bloom in a short period of time, only need to spray once a day in the morning and evening, and in addition, in each watering, you can add an appropriate nutrient solution to the water, and the roots absorb enough nutrients, which will be more conducive to the formation of anthurium flower buds.

If the anthurium is in a closed state for a long time, its metabolism will be blocked, so that there is no flowering or the phenomenon of not blooming vigorously, so keep the flow of air, so that the anthurium will bloom in a good growth environment.

Soil selection, choose 3:3:3:

1. The crushed pond mud, humus soil, fine river sand, and plant ash are mixed to make culture soil; The suitable temperature is 18 28, which can not exceed 35 in summer and about 10 in winter; Watering frequency, once in spring and autumn 3 to 4 days, once in summer about 2 days, once in winter 5 to 7 days; Fertilize rationally, use foliar fertilizer with high magnesium content, and apply once every 7 to 10 days during the growth period.

It is recommended to use loose and fertile, air permeability, and excellent drainage ability of acidic soil when cultivating anthurium, and you can choose 3:3:3:

1. Mixed nutrient soil with broken pond mud, humus soil, fine river sand, and plant ash, add some well-rotted farmhouse fertilizer as base fertilizer to improve soil fertility, and add a small amount of calcium phosphate for an average of 3 months during the breeding process to maintain the slight acidity of the soil.

The suitable temperature of anthurium flowers is between 18 and 28, high temperature in summer, can not exceed 35, pay attention to the use of shade nets for shading, the lowest temperature in winter is about 10, and the north needs indoor maintenance. Like a warm and cool growth environment, it is recommended to put it in a semi-shaded place when maintaining, with soft scattered light, avoid direct sunlight, and prevent leaf burns.

When watering anthurium, pay attention to the amount of water, the water-loving is not high, to avoid long-term moisture and water accumulation in the soil, resulting in root rot and other phenomena. In spring and autumn, water once every 3 or 4 days, the temperature rises in summer, the water evaporates quickly, and it is watered once every 2 days or so, and the winter is cold, the roots enter the dormant period, and the absorption is slow, and it is watered once every 5 7 days.

Anthurium likes fertilizer, the demand for magnesium is higher, you can use water-soluble compound fertilizer, or foliar fertilizer with higher magnesium content, apply once in 7 10 days during the growth period, and apply less or no fertilizer in summer and winter. Use a large amount of water to dilute to reduce the concentration of fertilizer, prevent burning the roots, and adhere to the principle of thin fertilizer and frequent application to avoid fertilizer damage.