What should I do if the leaves of the gentleman s orchid are not standardized?

Whether a pot of Junzi Orchid is beautiful or not depends on the leaves, but many flower friends raise Junzi Orchid, some of the leaves are wide and some are narrow, and they don't look beautiful at all, what's going on?

Let me tell you: no matter how many leaves we have grown, whether it is three or five, or ten or eight, under normal circumstances, the width of each leaf is the same, even if it is a new leaf that has just grown, its width is the same as the old leaf!

If the width of the leaves of the Junzi orchid we raise is inconsistent, there is only one reason, that is, the lack of fertilizer! In this case, it's not just that the width of the leaf is inconsistent, if you look closely, this leaf is definitely not very green and bright, and the texture will be relatively light! So what if this happens?

Two solutions!

1. Change the potting soil

If we have not changed the potting soil for a long time, then after this situation, don't rush to fertilize it, especially in spring and autumn, the best way is to change it first, the nutrients in the potting soil are relatively mild and more uniform, so that soon its leaves will return to a normal state!

2. Use some compound fertilizer

If this happens when the soil should not be changed, then there is no other way but to fertilize it, what kind of fertilizer? To apply it a balanced ratio of nitrogen, phosphorus and potassium fertility, that is, compound fertilizer, because the junzi orchid is not tolerant to fertilizer, so it is best to give it a slow-release compound fertilizer!

In addition, in the usual daily maintenance, the placement of the Junzi Orchid is particular, one is to place it in the north and south, and the other is to rotate the direction of the pot regularly, for example, this week this side of the yang, then the next week to let the other side of the yang, so that all its leaves can be evenly lighted, so that the leaves not only grow neatly, but also green and bright!

In fact, the reason why the leaves of the orchid will grow unneatly is mainly because of the uneven light, so in the process of maintenance, we must often turn the flower pot so that the leaves of the pot can shine into the sun. There is also the poor temperature control in winter and summer.

The clamp correction method is the most common method, first prepare some wooden clips, and then prepare some softer paper towels, and then wrap the long crooked leaves and adjacent leaves with paper towels, and then clamp them up with clips, and slowly make the leaves of the junzi orchid become neat, and then take off the clips.

If the leaves are irregular, you can make simple pruning and adjustments yourself, and slowly make changes.

Separate the leaves in a foam box and wait for them to grow steadily before removing the foam so that the leaves will become very soft.

This plant is usually placed in two ways: one is placed parallel to the balcony window, and the other is placed perpendicular to the balcony window. It is worth noting that regardless of the arrangement, we should regularly turn its orientation 180 degrees clockwise or counterclockwise.

This regular cycle can be once every 7 days during the peak season and once every 10 days during the slow growth season. Because most of the causes of uneven leaves are caused by uneven lighting, this requires us to adjust the position regularly.

If there is already an irregularity, we can adjust it. You can use a small clip to clip the crooked leaf with the leaf next to it, and in order to prevent the clip from hurting the blade, we need to put a paper towel in the middle. After a while, the crooked leaves can basically be restored.

This method is relatively simple, we can prepare a few sheets of opaque tin foil or other opaque thick pieces of paper, and cut them to the same width and length as the blades. Then fold the paper in half from the middle vertically, then wrap the half of the leaf that has been crooked with the paper, and finally use transparent tape to stick the paper tightly on both sides of the leaf. After about 10 to 15 days, the leaves that have grown crooked can be corrected.

The leaves of the orchid are repentant and leak each pair grows accordingly. The young leaves of the orchid are very phototaxis, and the new leaves that have just grown will gradually deviate to the direction of the sun.

Therefore, there are two ways to place the Gentleman's Orchid. One is: let the leaves face north and south (parallel to the direction of sunlight); The second is to make the leaves face east and west (the direction of vertical sunlight).

But no matter how you place the Gentleman's Orchid, it is best to change the direction by 180 degrees every week; That is, to reverse some; In this way, the leaves of the orchid receive light more evenly; It will also grow more neatly.

As for the leaves that have grown crooked, they can only be corrected gradually; One of the corrective methods is: use a clamp to clamp the crooked blade and most of the leaves that are not outside (if the treatment is not good, it is easy to damage the blade); There is also a method of slowing down: whichever side of the leaf is crooked, cover that half of the leaf with opaque paper; Note that it should be covered from the tip of the leaf to the front and back of the root of the leaf, and you can use a small hairpin.

Every three or four days, the clip can be removed to see the effect until the position is corrected.

Adjust the light, you can use cardboard to face the side that wraps the long side of the leaves of the orchid, so that the leaves grow towards the side that is not blocked; Clamp fixation, which can be used to fix the long crooked leaf and the normally growing leaf together; Turning the pot can be adjusted by turning the pot so that the leaves receive even light, so that they can grow more neatly.

If the new leaves that are growing are uneven, you can use the method of blocking the light to adjust, you can prepare opaque cardboard, trim the paper into a shape equal to the width of the leaves of the orchid, and then use the paper to wrap the long side of the leaves of the orchid, the long leaves do not receive light, they will grow towards the side without shading, and then remove the baffle after the leaves are full.

The uneven leaf can also be adjusted by clamping the leaf with a clamp, and the long crooked leaf and the normal leaf can be clamped together to make the leaf gradually recover. To avoid damage to the blades, a paper towel or soft cloth can be placed on the clip for protection.

The leaves of the orchid are not neat, which may be caused by uneven light reception, so it is necessary to transfer the orchid to a well-lit environment in time for maintenance, and adjust the light according to the growth state of the leaves, so that the sunlight shines vertically on the leaves. In addition, the pot needs to be rotated every two and a half months so that the leaves growing on the other side receive the same amount of light.

Orchid is suitable for growing in a warm environment, with poor cold and heat resistance, and the leaves are prone to uneven growth in the case of a large temperature difference between summer and winter. Therefore, in summer and winter, it is necessary to transfer the orchid to the indoor maintenance, and control the room temperature difference within 5 to enable the plant to grow normally.

Rotate the pot: Provide light according to the direction of growth of the leaves, and turn the pot every half month. Sheet of paper occlusion:

Clamp the uneven blades with a cardboard shell, tilting in the correct direction. Paperclip fixation: Use paperclips to fix uneven blades and nearby blades.

Adjust the temperature difference: Put it indoors in summer and winter, and control the temperature difference within 5 degrees.

1. Turn the flower pot

The leaves of the orchid are not neat, which may be due to the uneven light reception, so the plants should be placed in a well-lit environment, provide light according to the growth direction of the leaves, let the sunlight shine vertically on the leaves, and rotate the pot 180 degrees every half moon to let the leaves on the other side receive the same amount of light.

2. Paper blocking

If you want to make the leaves of the orchid become neat, in the process of breeding, you can collect some cardboard shells, clamp them on both sides of the uneven leaves, so that they grow in the normal direction, generally after two months, the orchid will return to normal, but the cardboard shells are easy to absorb water and moisture, and should be replaced regularly during the adjustment period to avoid the leaves being infected with bacteria.

3. Paperclip fixation

Use a paper clip to adjust the uniformity of the leaves of the orchid, first tilt the uneven growth leaves along the normal growth direction, and then use a paper clip to fix them together with the nearby leaves, forcing the uneven leaves to return to normal growth, pay attention to the new leaves that have just grown should not be fixed with paper clips, so as not to wilt the leaves.

4. Adjust the temperature difference

Orchid likes a warm environment, not resistant to heat, not cold-resistant, in the case of a large temperature difference between summer and winter, there will be uneven leaf growth, so in summer and winter, to put the orchid indoors, the temperature difference is adjusted within 5 degrees, which is conducive to the growth of plants, and can be maintained normally in spring and autumn.

If the leaves grow irregularly, it is necessary to ensure that the leaves on both sides can be moistened with sufficient and uniform light, and turn the pot every 7 10 days. It can also be fixed by manual trimming or pinched with small clips. Using cardboard to make groove abrasives forces the orchid to grow in a fixed position, or to properly control the temperature, which naturally alleviates the uneven condition of the leaves.

The leaves of the orchid are not grown neatly, probably because they are not evenly exposed to light during the growth and development period. During the peak development period, rotate the pot every 7 to 10 days to let one side of the leaf grow towards the sun to ensure that the leaves on both sides receive light evenly.

For leaves that are not neat enough, the easiest way is to trim them by hand. Use a clean, clean, disinfected and sterilized sharp pruning knife to cut the leaves of the convex side of the orchid to the length of the other side. Or use small clips to clamp the crooked leaves together and fix them, and the growth trajectory can be restored after a period of time.

Using cardboard, cut off some grooves according to the appearance of the leaves of the orchid, and each leaf of the orchid is fixed into a groove, forcing the orchid to grow according to the position of the grooves in the cardboard abrasive. In this way, the leaves of the junzi orchid are forcibly adjusted to a neat and regular development trajectory, and the effect is very fast and obvious.

In fact, the change of temperature will also have a certain effect on the growth of the leaves of the orchid. The ambient temperature changes too quickly, and if the temperature is too high or too low, the growth activity of the leaves will be reduced, and the leaves on one side will be underdeveloped and look untidy. It is most appropriate to stabilize the temperature between 15 and 25.

1. Rotate the flower pot: The leaves of the orchid are asymmetrical, and the flower pot can be rotated once a week to make it evenly lighted. 2. Shading:

Use tin foil to wrap the leaves of the orchid that grows well. 3. Pruning: Cut off all the crooked leaves of the orchid to avoid its poor growth.

4. Watering: Watering every 7-10 days to make the leaves of the orchid grow symmetrically.

1. Turn the flower pot

The asymmetry of the leaves of the orchid is generally caused by the fact that one side of the light received is strong and the other side is weak. The plant will grow well on the sunny side and skew on the other side, so just turn the side that is not growing well to the sunny side.

2. Shading and blocking light

This asymmetry of the leaves is due to the phototaxis of the plant, which will grow towards bright places, so we need to wrap the side of the plant with opaque cardboard or tin foil, maintain it in a sunny environment for a period of time, and wait until both sides are neatly grown before removing.

3. Prune the leaves

If the skewed plant is more serious, and it is not simple that one side is strong and the other side is weak, then it is difficult to maintain it by continuing to use the method of turning potting or shading, and it is best to cut off all the skewed leaves that are on the opposite side and re-maintain the new leaves, which is simpler and faster than the maintenance of old leaves.

4. Control watering

When watering, we also have to prevent the asymmetry of the plant, excessive watering caused by rotten roots will also lead to the skewed and asymmetrical leaves of the plant, so we should water according to the actual situation of the soil, do not dry or water, watering until the soil is slightly moist, should not be overwatered.