Old tiled houses often leak rain, and it is better to make up for the leakage of tiled houses

I remember that the red brick bungalow in my house used to leak during the rainy season after the beginning of summer. If the leakage is not serious, and there is only rainwater leaking down when it rains heavily, then my family and I will prepare a few large and small pots and put them under the house to receive water. If the leakage is more serious, then you have to find a way to fix the leak.

Rural tile house leakage, at present, the more reliable and long-term method is to re-til, that is, to make new tiles, but the cost is high and the cycle is long. In this case, we generally use steel structure (color steel) to cover the frame. At least ten years of use is no problem, simple, lightweight, fast, economical.

The tile house is leaking, which is very simple, go to the house to pick up the tiles. In the past, the ridges and eaves of the tiled houses were all made of lime. Some tiles are built with lime, and in the early years, tiled houses were generally not built, and it was easy to be blown up by the wind when it was windy.

Some tiles are not of good quality, through hot weather exposure to sudden rainstorms will crack, heavy objects falling on the tiles will also cause damage, if the overall decline of the tiles has caused a "leakage" situation, this is to take all down, the wooden planks of the friendly tile are fixed again, and the new ones should be replaced with new ones. Then the sand ash is mixed and spread on top of the wooden planks, and then the tiles are fixed on the sand ash.

This is relatively simple, buy some new tiles, if you want to be durable, choose green tiles, on the contrary, choose red tiles, I personally think that green tiles are better than red tiles, durable, and then ask local masons or older generations to turn over tiles, when the tiles turn out, you can see that some tiles are broken, when covering tiles, try to cover a little dense to buy some new tiles, and find the master of the tiles to cover once, and the place where there is a crack in the ridge can be used cement mortar.

Coated cover. If you are not at ease, wait for the cement mortar to dry before applying waterproof coating.

Just in case! Thank you for the invitation, it is purely personal experience, please advise me if there are shortcomings!!

Rain leakage, then you have to ask a professional to repair it, I also have experience in this area, according to the leakage area of the roof, buy some asphalt and linoleum.

Clean the room surface, when the asphalt is heated into a dilution, brush it on the leaky part of the room, and the linoleum is heated and pasted on the asphalt water! If you don't understand, you have to hire a professional.

Change the tiles. Because the old tiled house leaks rain, it is generally caused by the cracking of the tiles, so the cracked old tiles should be replaced.

These tiles should be lifted, then plugged with cement where the rain leaks in the home, and finally let the tiles be covered, so that there will be no rain leaks, especially in the summer.

For new ones, some of them are indeed broken, so you need to replace them and replace them with new ones, so that you can avoid rain leaks to a large extent.

To fill the leakage of the tile house, you can only find a relatively complete tile coverage hole. The method is relatively simple, and the operation is very convenient.

Find out the root cause of the water leak and find the water seepage point for repair. According to the correct construction process, repair the large leakage first, and then repair the small leakage; Fix the water leakage at the high place first, and then repair the water leakage at the low place; Fix the wall leak first, then the floor leak. Avoid the practice of "headache treatment".

Otherwise, only part of the leakage point is repaired, and the real leak point is not found, so as to enter the multi-point leak repair state.

For the repair of water leakage in the house, we should start from the original leakage problem, fundamentally propose a solution, investigate the situation of the leakage point: the size, degree and distribution of the leakage point, analyze the cause of the crack, and then select the corresponding waterproof material for construction and repair. Do not use waterproof materials that are incompatible with the waterproofing layer.

Many people think that waterproofing coatings are similar, but they don't know that there is also "repulsion" between waterproofing materials. If the repair coating does not combine well with the waterproofing layer, the desired waterproofing effect cannot be achieved.

Even if the leak is repaired, a secondary leak will occur. Therefore, it is important to choose a material that is compatible with the original waterproofing layer and has good waterproof properties before repairing the water leak. First of all, we must find out the cause of the water leak so that we can solve the problem of water leakage at the root.

There are many reasons for a water leak. For example, the poor quality of the waterproofing layer and the poor sealing of the floor tiles can lead to water leakage. Corresponding maintenance measures should be taken according to different water leakage factors.

Due to the leakage caused by the poor quality of the waterproofing layer, we had to break all the floor tiles, find the original waterproofing layer, clean and dispose of the base layer.

If there is no leakage downstairs, the waterproofing is qualified, and the floor tiles are restored at the end. Unreasonable design scheme, unqualified maintenance materials, inadequate construction technology, and unconscious maintenance in the later stage are the main reasons for roof leakage. The non-professional construction team lacks professional technology, and there are loopholes in the construction plan provided.

In addition, without formal training, it cannot handle the detail nodes, which makes the waterproofing effect not last long. After the construction is completed, it often leaks again. Regardless of the leak in **, it can be summed up in one sentence:

The devil is in the details.

If the rain leakage of the tiled house in the countryside is more serious, it can be suggested to re-lay the glazed tiles. Nowadays, there are many waterproof building materials, which are relatively low cost and can be repaired.

The cheapest** way is to put a tarp on the roof of a tiled house to cut off rainwater so that there will be no more rain leaks in the house.

I think you can lay a layer of color steel plate on the roof, which is not only leak-proof, but also cheap.

You can buy some cheaper porcelain tiles, steel tiles, spread on the roof, these tiles are not easy to break, and particularly durable, and do not need to be repaired, ** is also relatively cheap, after a long time, the color will not change too much, you can use some asphalt on the top to repair, so that the roof is more solid.

You can replace the tiles on the roof, you can pave waterproof materials, you can choose asbestos tiles, you can choose small green tiles, you can also choose color steel tiles, you can choose resin tile paving.

I think that using resin tile is the best solution now, the cost of digitalization is relatively low, and the service life is long, many people will choose resin tile.

1. In this case, you only need to clean up the aging and broken tiles and the moss on them, and then replace them with new tiles. This method is also called "leakage".

2. If you find that the tile has been used for many years, you can consider directly replacing the new tile, if only part of the area is loose in the case of the tile, when the water leaks, you can disassemble the original tile and then lay a layer of waterproof material inside.

3. Conduct a comprehensive inspection, and do not miss a place, so as to completely solve the problem of water leakage in the tile house. The roof must be kept dry before the waterproofing is carried out, because the moisture on the roof will not evaporate, the new waterproofing layer will be lifted, and the waterproofing effect will be immediately invalid. It is not advisable to carry out construction on rainy days, and it is necessary to wait until the sun has dried the moisture before construction.

Tiled roof design requirements

1. Waterproof and drainage requirements.

The roof should be made of impermeable waterproof materials, and reasonable structure should be used to achieve the purpose of prevention and drainage. Drainage is to use a certain drainage slope to drain the rainwater from the roof as soon as possible; Waterproofing is the use of waterproof materials to form a closed waterproof covering. Roof waterproofing and drainage is a comprehensive technical problem that takes into account all factors.

2. Structural safety.

The roof is a load-bearing structure in the upper part of the building, which supports the white weight and various live loads acting on the roof, and also plays a horizontal supporting role on the upper part of the house. Therefore, it is required that the roof structure should have sufficient strength, rigidity and stability of the overall space, and can withstand the loads of wind, snow, rain, construction, and masters.

The best repair method for rain leakage in tile houses: waterproof paste repair, asphalt oil, and polyurethane brushing.

1. Waterproof paste repair.

Partial repair with waterproof paste is the easiest way to do it yourself. Specifically, we buy finished waterproofing paste for outdoor use, and then repair the leakage on the roof.

2. Asphalt oil.

In fact, the most traditional way to repair the leakage on the roof of a bungalow is to fill with bitumen oil. I'm sure many friends have seen it. It is a lot of waterproofing to boil asphalt on site, and then melt the asphalt into an oil state, and then carry out joint filling treatment.

3. Brush polyurethane.

In fact, polyurethane is a very good waterproof coating. Polyurethane is used for waterproofing in many places nowadays. It is also very feasible for polyurethane to partially repair the roof waterproofing.

Precautions for rain leakage in tiled houses

1. If the ridge of the small green tile house is leaking, it is necessary to focus on checking whether the cement mortar at the ridge is cracked and whether it is densely connected with the tiles. If there are cracks, be sure to use Qingquan impermeable and waterproof agent to stir cement mortar to re-repair and smooth! Then use Qingquan Xiaoqingwa impermeable and waterproof agent to spray it many times in a row!

2. Water leakage at the eaves of small green tiles, which mostly occurs in tiled houses with concrete sloping roofs. The cornice drainage should be smooth, can not produce water, tile mortar caulking, cracking must be used Qingquan small green tile impermeable waterproofing agent stirring sand ash carefully repaired and leveled. Then spray the entire tile roof with Qingquan small green tile impermeable waterproofing agent, and spray it comprehensively, not to be missed!

How to repair a leak in a tiled house.

1. Determine the cause of water leakage, generally because the tiled house has been in the house for a long time, and the tiled house may leak after experiencing strong winds, rains and snow.

2. If it is a small range of water leakage, a single tile is destroyed by external force, it is easy to deal with, the easiest way to deal with it is to replace the tile, of course, before replacing the building mud seal, and then on the new tile, of course, you can also let the professional person to fill the leakage help to fill the leakage.

3. If you have tested and checked by yourself, or the tile house has been more than ten years, then you need to renovate the house in a large area, generally remove the original tiles, mix the mud, and find one or two people to replace the new tiles. If you can't do it yourself, you can outsource the project or find a professional to handle it.

In this case, it is necessary to buy some new tiles and replace the old tiles that have broken down.

If the tile house leaks, you must find the leakage place, it may be that the tile is broken or loose, and it will not leak if it is treated.

Eliminate the cause of tile cracking and water leakage, which is basically the water leakage caused by wind and rain backflow.

Due to the smooth drainage, the overall leakage situation of the sloping roof is much better than that of the flat roof, but it is much more difficult to repair the flat roof when there is leakage.

There are many theoretical ways to completely solve the problem, but in practice can not be done, the general slope roof leakage will not be too serious, can endure it, otherwise it is too expensive to completely solve the movement.

Two ways, if the room is a flat roof, you can do urea-based waterproof coating on the flat roof, if there is no flat roof, you must smooth the tile surface to make a waterproof layer, remember not to use membranes, to use urea-based waterproof paint thoroughly.

If you want to solve the leakage of the tile house completely, then replace the inner layer, and replace it all, and then replace the broken tiles.

Answer: If you want to completely solve the leakage of the tile house, the way is to take down all the tiles and eliminate them. If you have a broken tile, you can rehang it.

The main reason for the leakage of the tile house is that the tiles are cracked or misplaced, and some tiles of the same type can be replaced and repaired.

If you want to solve this problem if the tiled house is leaking, then you can choose to replace the leaking tile on a sunny day.

In the past, the leakage of the old tiled house was a very troublesome thing, because only the old masons of the past could repair it, and the old masons were old and could not get on the roof, so they could not be repaired at all. Now there's a whole new way to solve this problem once and for all. It is to use the current color steel tile with sponge, operated by professionals, and cover a layer on the tile, which can effectively solve the problem of water leakage!

The tiled house is leaking, and if you want to solve it completely, you have to re-tile it, and it will be solved.

The leakage of the tile house may be that one piece of the tile is broken, and the broken tile should be carefully inspected, and then the bricklayer can replace it.

Build tin tiles on top.

Re-cover, it is also possible that the tile strips are sparsely nailed, and the head of the tile is not enough, so it is necessary to remove the tiles and re-nail the tiles

There are two main causes of water leakage in the village roof, one is the leakage of the roof of the tiled house, and the other is the leakage of the roof of the bungalow. Among them, the most common leakage of the roof of the tiled house is due to the aging of the tiles after years of erosion and frost, for this case, it is only necessary to clean up the aging and broken tiles and the moss on them, and then replace them with new tiles. This method is also called "leakage".

You can also go to the roof as before to pick up the renovation of the tile, if you find that the tile has been used for many years, you can consider directly replacing the new tile, if only part of the area of the tile loose leakage, you can disassemble the original tile and then lay a layer of waterproof material inside, you must carry out a comprehensive inspection, can not miss a place, so that you can completely solve the problem of water leakage in the tile house. Here we must pay attention to the fact that before the construction of the waterproof leakage, the roof must be kept dry, because the moisture of the roof will not evaporate, the new waterproof layer will be jacked up, and the waterproof effect will be invalid immediately. Therefore, it is not advisable to carry out construction on rainy days, and it is necessary to wait until the sun has dried the moisture before construction.