My computer often shows up the following commands

It should be that the lander that was opened was not good.

If you look it up on the Internet, you will know that this problem is actually very common, generally hardware incompatibility, driver problems, and conflicts between software, and there is no good solution, and I often encounter it (especially when playing games).

I recommend it to you if your hardware (graphics card. Display screen... If you have the original driver, reinstall the driver, and decorate the software less, especially the background running, system optimization, beautification, etc.

There is also "Run Entercmd Enter at the Command Prompt."

for %1 in (%windir%\system32\*.dll) do /s %1

This command, dude, you type slowly, and if you type it correctly, you will see the screen scroll quickly, otherwise it will ......Otherwise, failure will not have this effect. After entering, wait slowly (it will take some time 1-2 minutes) and then open it after running and see" This method, I have tried it several times, I didn't find it useful, but you should try it.

The last trick is to change the system to a stable point, like depth.

It's okay, it should be that you disabled some software at boot, but not all of them were disabled, resulting in incorrect memory booting,

I've also seen that after a few days it's automatically good, but the main reason for this is not understood.

1. There are too many programs open, if there are too many documents or too many programs running at the same time, and there is not enough memory to run other programs, you should close the programs and windows that you don't use at any time.

2. There are too many programs that run automatically, close some startup programs, start-run-msconfig--- start.

In addition to anti-virus software and input methods, general programs can be turned off.

3. The physical memory is too small, and the memory of the marriage management is increased; The memory and motherboard are not plugged in properly or other hardware is incompatible.

Reinsert the memory or change the slot.

Dual memory is not compatible.

You want to use the same brand of memory or just one memory.

Inferior memory modules or memory modules are broken.

Replace the memory module; Set up virtual memory appropriately.

4. Excessive fluctuation of mains voltage, or the use of inferior power supply on the PC, will bring damage to the memory, and replace the power supply with high power and high quality.

5. The PC chassis is full of dust, or the PC working environment is relatively humid, which will also cause abnormal operation. Dust removal in time.

6. CPU and graphics card heat dissipation problems.

Improved heat dissipation. 7. There is a problem with the hard disk.

Scanning, repairing, or replacing the hard drive. 8

Driver issues. Reinstall and update the driver.

9. Illegal operation, the system cannot be executed.

10. Software damage.

Reinstall the software. There is a bug in the software

Patch or update to the latest version.

Software and systems are not compatible.

Patch the software or try the system's compatibility mode.

There is a conflict between the software and the software.

If you have recently installed any new software, uninstall it.

There is something wrong with the system itself.

Sometimes there are bugs in the operating system itself, so it is best to install the official update program and reinstall the system if necessary.

12. Virus problems.

Antivirus; Antivirus software conflicts with the system or software.

Since the antivirus software enters the underlying monitoring system, it may conflict with some software, so try uninstalling it.

The system appears that the memory cannot be"read"or"written"The reasons are:

1. The driver is unstable and incompatible with the system, which is most likely to cause memory cannot be read

Or file protection.

2. The system has installed one or more rogue software, which has a greater chance of IE or system crash, and there may be file protection 3. There is a conflict before the program loaded by the system or the program that the system is running, especially some antivirus software monitoring programs.

4. There are vulnerabilities in the system itself, which makes it vulnerable to network attacks.

5. The virus problem is also the main cause of memory failure.

read, file protection,

Error ......6. If there is a memory failure when playing the game.

read, it is very likely that the graphics card driver is not suitable (there are graphics cards that are not suitable for the game and the computer), or it is possible.

The version is not new enough or does not meet the game or graphics card driver.

7. The problem that some software itself is insufficient.

8. The overheating of the computer hardware also leads to the inability of the memory.

One of the reasons for read.

9. The poor compatibility between the computer memory and the motherboard also causes the memory to not be read

The fatal cause!

Simple workaround:

in(%windir%\system32\*.ocx)doregsvr32

for%1in(%windir%\system32\*.dll)doregsvr32

s%1 This will take a long time, wait patiently, but it may also take a restart before the whole effect comes out.

1) Press F8 immediately after booting or not turning on the phone to press F8 to the advanced option to let go of the hand, use the up and down keys to select the safe mode enter, enter the safe mode and use the software to kill the Trojan, uninstall everything installed before the accident, including the game, restore the system or reinstall the system (if you can enter the safe mode, it means that you have installed something inappropriate, and uninstall all the inappropriate things before the accident, and you have hit the Trojan, use the software to kill the Trojan, if not, Restore the system or reinstall it, if you can enter normal mode, in normal mode you can also do it according to the method above).

2) If the above methods can't solve the problem, first soft and then hard, reinstall the operating system, don't install software, patches, drivers, etc., and see if there are still problems with booting? If you don't install drivers, patches, and software step by step, and find something that isn't suitable, don't install it.

Please note: If you restore the system or reinstall it, when installing drivers, patches, software and other things, be sure not to install the things that affect your accident this time, otherwise it will be restored or reinstalled in vain.

3) The above is caused by system problems, and the following is caused by network problems.

1. If it is a problem with the broadband itself, first directly connect to the broadband network cable for testing, and if it is a broadband problem, contact the broadband customer service to solve it.

2. If it is a problem with the router, if it can be used originally, it cannot be used for the time being, my own practice is to disconnect the power supply of the router and plug it in, and I will see. In there is a factory reset, it can be used from the new settings (this is under the premise of the correct physical connection, sometimes caused by the router's slow or failed IP address search, not that the router is broken).

If it can't be solved all the time, it is recommended to call the customer service of the router, they have **** guidance, I encounter a problem that I can't solve by myself, it is very useful to consult the advice they gave, and they will give the correct advice for your settings or operations.

3. If you turn off the wireless switch and turn it on, if it is a wireless connection with software, it is normal for the software to be difficult to use and often have problems, there is no better way, use a router. In addition, the network card driver is not or which is not suitable, and whether there is a problem with the network cable interface or network cable.

4. If it is caused by system problems, it is recommended to restore the system or reinstall it.