How to clean the latex paint on the diamond screen?

In fact, the cleaning is very simple, according to what I said, it is easy to remove the latex paint.

Prepare the tool:Steel wool balls, caustic soda, hot water, sponge cleaning cloth, small watering can, kitchen rubber gloves

Step 1,Wear gloves

Because caustic soda will be used later, it is corrosive.

Step 2,Make a dissolved solution

Add caustic soda to a small watering can and add an appropriate amount of warm water.

Step 3,Spray the dissolved liquid onto the location of the latex paint

The main purpose of this step is to soften and partially dissolve the latex paint, be sure to spray it carefully.

Step 4,Clean the latex paint with a steel wool ball

At this time, because the latex paint has softened, the latex paint can be easily brushed off the steel wire mesh using steel wool balls.

Step 5,Clean the diamond mesh

Use a sponge cleaning cloth to clean all the impurities on the diamond mesh with clean water, and clean up the residual baking soda solution to avoid corroding the gauze.

It's over here, and remember to use a little hotter water, so it's easier to clean the latex paint.

First, we take off the stainless steel window screen, you can find some old newspapers and other useless things or use the gas stove at home, after ignition, we burn the oil stain on the stainless steel window screen back and forth, we can see that the oil stain will slowly melt and drip, and finally only the ash after the oil is burned, we only need to pat the stainless steel window screen to shake off the ash on the stainless steel window screen, and finally wipe the surface of the window screen with a rag, and the stainless steel window screen will be clean as new.

Second, we can use the kitchen special cleaning supplies - oil stain net, if the oil stain is not serious, you can spray it directly on the window screen and then brush it, you can easily clean the oil stain, if it is serious, we need to mix the oil stain with water (the general proportion is half of the water, the oil stain net half) If it is serious, the water will reduce the amount of oil stain net increment, and then put the stainless steel window screen into the water to soak, generally soak for 2-3 days The oil stain will be easily removed, we recommend that you use hot water to remove it easily.

3. If you are afraid of the above two kinds of time-consuming and laborious If you have rich funds on hand, we recommend replacing the window screen, replacing the new window screen is the most convenient way, but you need to consider the problem of funds. Because the cleaned stainless steel screen is not as good as the new stainless steel screen.

Summary. Friend. Hello.

Friend. Hello.

1.The latex paint on the screen window can be cleaned with dish soap; 2.Alcohol can also be used for stool elevation; 3.

Latex paint can be removed using Gong; 4.Nail polish remover can also be used to remove latex paint; 5.You can also use wind oil essence to erase the milk jujube glue paint; 6.

It is also possible to use a cleaning agent for latex paint.

Summary. Hello, the latex paint on the cleaning screen can be diluted with alcohol, and the white latex paint has a certain overflowability, which can be sprayed on the latex paint with alcohol and water together, and after a while, you can easily remove the latex paint on the screen window by gently brushing it off.

Hello, the latex paint on the cleaning screen window can be diluted with alcohol, and the white latex paint has a certain overflowability, which can be sprayed on the latex paint with alcohol and water together, and after a while, the latex paint on the screen window can be easily removed by gently brushing it off.

It can also be used to use wind oil essence to erase the scattered rubber paint before the milk, and whether the wind oil essence is used on the screen window or on the leather, it can be used to remove the corresponding stains.

1. It is necessary to check the joint between the diamond mesh frame and the wall of the diamond mesh screen window, because there will be loosening with the growth of use time, which is easy to deform the frame as a whole and make the diamond mesh unable to close and seal. Therefore, if you find that the screws at the connection are loose, you should immediately ban the jujube and fix it. If the screw base is loose, use epoxy super glue to adjust a little mud for sealing.

2. After the screen is installed, regular maintenance should be carried out, and the screen itself also has an automatic cleaning function to roughly remove the dirt on the surface, and clean it by itself at the same time.

3. The regular maintenance of the screen window is also very simple, spray some lubricant on the screen track, lubricate the track, and add some oil to the positioner. If the yarn surface is damaged, the yarn surface can be replaced alone, which is flexible and easy to maintain.

4. If you need to clean the foreign objects and dirty spots on the diamond screen, do not use metal objects such as steel wool balls and steel brushes to clean the screen, and use newspapers, water, sponges, etc. to clean and bury the screen.

5. When the diamond mesh screen has the function of opening and dismantling, it is not possible to directly soak the handle lock, hinge shaft and clutch lock connection with water during cleaning and maintenance, so as not to cause rust of accessories and astringent failure of the switch, and regularly inject a small amount of hydraulic oil into the connection of hardware accessories, which can alleviate the wear and tear of hardware accessories and prolong the use of the product.

6. If the diamond screen window is rusted due to oxidation, the aluminum rust can be gently scraped off with a knife, then washed with soapy water, wiped dry with a dry cloth, and then polished with a dry cloth after waxing oil, which can be smoother as new.