How to clean the oil stains of the diamond mesh screen?

First, we take off the stainless steel window screen, you can find some old newspapers and other useless things or use the gas stove at home, after ignition, we burn the oil stain on the stainless steel window screen back and forth, we can see that the oil stain will slowly melt and drip, and finally only the ash after the oil is burned, we only need to pat the stainless steel window screen to shake off the ash on the stainless steel window screen, and finally wipe the surface of the window screen with a rag, and the stainless steel window screen will be clean as new.

Second, we can use the kitchen special cleaning supplies - oil stain net, if the oil stain is not serious, you can spray it directly on the window screen and then brush it, you can easily clean the oil stain, if it is serious, we need to mix the oil stain with water (the general proportion is half of the water, the oil stain net half) If it is serious, the water will reduce the amount of oil stain net increment, and then put the stainless steel window screen into the water to soak, generally soak for 2-3 days The oil stain will be easily removed, we recommend that you use hot water to remove it easily.

3. If you are afraid of the above two kinds of time-consuming and laborious If you have rich funds on hand, we recommend replacing the window screen, replacing the new window screen is the most convenient way, but you need to consider the problem of funds. Because the cleaned stainless steel screen is not as good as the new stainless steel screen.

In fact, the cleaning is very simple, according to what I said, it is easy to remove the latex paint.

Prepare the tool:Steel wool balls, caustic soda, hot water, sponge cleaning cloth, small watering can, kitchen rubber gloves

Step 1,Wear gloves

Because caustic soda will be used later, it is corrosive.

Step 2,Make a dissolved solution

Add caustic soda to a small watering can and add an appropriate amount of warm water.

Step 3,Spray the dissolved liquid onto the location of the latex paint

The main purpose of this step is to soften and partially dissolve the latex paint, be sure to spray it carefully.

Step 4,Clean the latex paint with a steel wool ball

At this time, because the latex paint has softened, the latex paint can be easily brushed off the steel wire mesh using steel wool balls.

Step 5,Clean the diamond mesh

Use a sponge cleaning cloth to clean all the impurities on the diamond mesh with clean water, and clean up the residual baking soda solution to avoid corroding the gauze.

It's over here, and remember to use a little hotter water, so it's easier to clean the latex paint.

Preparation: dish soap, white vinegar, toilet water, warm water, watering can, scouring pad treatment method:

1. Add dish soap to the watering can.

2. Pour in an appropriate amount of white vinegar.

3. Add an appropriate amount of toilet water.

4. Finally, add warm water to dilute all the materials.

5. Close the lid and shake the watering can evenly.

6. The finished solution is sprayed on the gold steel mesh that needs to be cleaned.

7. Wipe repeatedly with a scouring pad, and the dirty places can be sprayed more and then wiped.

8. After the operation is completed, the dirt on the screen window can be disposed of.

The diamond net anti-theft screen can be disassembled and cleaned, and the diamond net security screen is strong, durable, long service life, and easy to clean. When washing, you only need to remove it and rinse it with water.

When cleaning, you can also use a few pieces of waste newspaper soaked in the diamond mesh mesh to wipe back and forth, but if it is a gray layer catkins mixture, oil soot layer mixture, you should use a wet rag, a plastic cleaning brush dipped in a little cleaning agent and then wipe back and forth. The diamond screen window has a detachable function, please do not directly soak the handle lock and the lock connection with water during cleaning and maintenance, so as not to cause rust of the accessories and astringent failure of the switch.

Yes, it is generally designed with locks, which can be disassembled and cleaned, which is convenient and practical.