How to clean up the house is to scrape putty and fall on the floor

When decorating a house, it is a common problem for putty to accidentally fall on the floor. To clean up these putty, you can take the following methods.

The specific decoration of the house can be calculated here, just enter the area + city, calculate the decoration in 3 seconds, know the real ** in advance, and easily grasp the decoration company: [Click here, free decoration**].

First, you can use a damp cloth or a damp mop to clean the scraping putty from the floor. After soaking the cloth or mop, gently wipe the surface of the floor to remove the putty. If there is more putty or it is more difficult to clean, you can add a small amount of detergent to a damp cloth or mop to increase the cleaning effect.

If a damp cloth or wet mop doesn't completely clean the putty, you can try using a scraper or scraper to carefully scrape off the remaining putty. When using a scraper or scraper, be careful not to scratch the floor surface to avoid damage.

Also, if the scraping putty is already dry, you can use hot water to soak the putty on the floor to soften them. Then use a damp cloth or damp mop to clean it up.

It should be noted that cleaning the scraping putty may cause some damage or wear to the floor. Therefore, it is best to test before cleaning to ensure that the cleaning method used does not cause irreversible damage to the floor.

As for the cost, the range of cleaning putty will vary depending on the region and market. Generally speaking, if you just clean a small amount of scraping putty, the cost may be lower, about a few tens of yuan to a hundred yuan. However, if you need to clean up a large area of scraping putty or use a professional cleaning service, the cost may be higher, which can be a few hundred yuan to more than a thousand yuan.

In general, the method of cleaning the putty that falls on the floor during the renovation process is relatively simple and can be carried out by yourself. However, if there is a lot of putty scraping or it is difficult to clean, or if you are worried about damage to the floor, it is recommended to seek the help of a professional cleaning service. In terms of fees, it varies according to different situations, and can be referred to according to the local market price.

Finally, it is recommended to recommend our "Tuba Rabbit", Tuba Rabbit has 110,000 decoration companies and first-class businessmen in his hands, and the direct sales of building materials are affordable. Tuba Rabbit is selected for decoration, and Tuba Rabbit can accompany the signing of the contract for free, "decorate first and then make payment", reducing the worries of the owners. For more decoration information, welcome to visit:

Click to enter, professional customer service free consultation good company].

Kunming - [Kunming Decoration Strategy Guide].

Suzhou - [Suzhou Decoration Strategy Guide].

Hefei - [Hefei Decoration Strategy Guide].

Fuzhou - [Fuzhou Decoration Strategy Guide].

Beijing - [Beijing Decoration Strategy Guide].

Dalian - [Dalian Decoration Strategy Book].

Hangzhou - [Hangzhou Decoration Strategy Guide].

Shanghai - [Shanghai Decoration Strategy Guide].

Tianjin——[Tianjin Decoration Strategy Guide].

Putty is often used as decoration accessories when decorating the room, which can facilitate the decoration construction, if the decoration personnel are not careful, the tile will leave a piece, or a large piece, it is very difficult to clean up for a long time, and the cleaning method is as follows

1. Wipe directly with a towel.

Wipe directly with a towel with a rough surface that is wet, and try to polish it in a semi-dry state, so that it will be easy to polish and easy to polish smooth and flat, and remove the dust on the wall after the treatment is completed.

2. Sprinkling water to soften.

Sprinkle water first, let the putty absorb water and become soft, soak it in a bucket of clean water, pick up the wall brush to be removed, (just like the method of rolling paint), less roller brush 2 times, after rolling to fully absorb the water, use a shovel to shovel, you can scrape off.

3. Wood flour + appropriate amount of water.

First, sprinkle some wood powder on the putty, then pour an appropriate amount of water, and wipe it with a towel after the putty has softened.

4. Floor cleaner.

If the above methods are not clean, directly buying special cleaning equipment is the most direct and rude method.

Notes:

Depending on the performance of the paint and the condition of the base layer, select the appropriate putty and scraping tools.

Scraping putty is one of the methods of interior wall decoration, which refers to the removal of uneven parts of the surface of the base layer by filling or overall treatment, and keeping the wall flat and smooth, which is an important step in the treatment of the base layer. The specific method is to scrape the putty on the wall to ensure that the wall is flat. Generally, scrape three times, and after drying, polish it with sandpaper.

This step is carried out before the latex paint is applied. The putty is prepared with a small amount of lacquer base, a large number of fillers and an appropriate amount of coloring pigments, and the pigments used are mainly iron red, carbon black, chrome yellow, etc.

Ways to quickly remove putty powder:Tools:A bucket of clean water, a paint roller, a wooden stick (to make a drum to lengthen the handle, no wooden stick PVR water pipe can also be, the thickness is the same as the drum handle), a box of paper cutting blades, a shovel knife holder per person, many people (on the paper cutting blade shovel blade holder),Method:The roller is connected and lengthened with a wooden stick, soaked in a bucket of clean water, picked up the roller brush on the wall to be removed, (just like the rolling paint method), less roller brush 2 times, (according to the thickness of the wall putty powder layer, thin, 2 times, thick many times) After rolling to fully absorb the water, use a shovel to shovel, it is easy to drop a large piece of a large piece down, and the putty powder can be scraped again after the wall is completely dry.

1. Cleaning method of putty powder on the floor:

1. Wet the putty with warm water first, and then use a small shovel to carry it, pay attention not to scrape too hard, so as not to scratch the floor;

2. After scraping, some stains will be left, drop some cleaning agent and add water on it;

3. Wipe it clean with a wet towel, and then drop a few drops of oil on the floor after wiping it clean, and wipe it clean with a dry towel, which will increase the gloss of the floor;

Second, the cleaning method of putty powder on the tile:

1. Take a basin of warm water and sprinkle the water on the putty powder of the tiles.

2. After the putty powder on the ground absorbs the water, continue to add water and apply it evenly with a mop until the putty powder no longer absorbs water.

3. Let stand for 15 minutes. During the period, sprinkle water to replenish water. After 15 minutes, take the waste newspaper prepared in advance, and wipe it lightly to wipe off the putty powder!

For the putty on the ground after cleaning and decoration, more and thicker putty can be removed with a batch knife, and after shoveling, it can be completely removed by repeatedly wiping with a damp cloth dipped in fine sand.

Summary. 1. You can use a relatively large sticky tape to repeatedly stick and tear on the ground stained with putty powder, which can also remove some putty powder. 2. You can add three to five spoons of salt to a basin of soapy water, then soak the cloth in water, wrap the cloth in the outside of the putty, and scrape the ground vigorously to remove it.

3. You can use a towel dipped in white vinegar and gently wipe it where there is putty, and wipe it twice for some thicker places, and you can scrub it with alcohol after wiping. 4. If it is not cleaned, wet the mop dipped in water and drag it repeatedly, let the putty moisten, and then wipe it vigorously with a cleaning ball.

Hello, I have seen your question and am sorting out the answer, please wait for a while 1. You can use a relatively large sticky tape to repeatedly stick and tear on the ground stained with putty powder, which can also remove some putty powder. 2. You can add three to five spoons of salt to a basin of soapy water, then soak the cloth in water, wrap the cloth in the outside of the putty, and scrape the ground vigorously to remove it. 3. You can use a towel dipped in white vinegar and gently wipe it where there is putty, and wipe it twice for some thicker places, and you can scrub it with alcohol after wiping.

4. If it is not cleaned, wet the mop dipped in water and drag it repeatedly, let the putty moisten, and then wipe it vigorously with a cleaning ball.

Use a blade or a spatula to make it little by little. With others, it will hurt somewhat.

Putty powder is a kind of building decoration material, and the main components are talcum powder and glue. A layer of white on the surface of the newly purchased rough house - putty, usually the whiteness of putty is above 90 and the fineness is above 330. Putty is a substrate used for wall repair and leveling, which lays a good foundation for the next step of decoration (painting and wallpaper).

Putty is divided into two types: interior wall and exterior wall, and the exterior wall putty should resist wind and sun, so it has high gelatinity, high strength, and slightly lower environmental protection index. The comprehensive index of interior wall putty is good, healthy and environmentally friendly, so the interior wall is not used externally, and the exterior wall is not used internally. Usually putty is gypsum or cement-based, so that the surface is rough and it is easier to bond firmly.

However, during construction, it is still necessary to apply a layer of interface agent on the base layer to seal the base layer and improve the adhesion of the wall, so that the putty can be better bonded to the base surface.

Putty is generally composed of base material, filler, water and additives.

The binder, also known as the binder, is the most critical component of putty, mainly playing various roles such as bonding. The most commonly used binders for putty are cement and organic polymers, which are divided into emulsions and latex powders. Cement is a binder with good cohesiveness, durability and reasonable cost performance, but it has poor tensile strength and crack resistance.

Organic polymers can be modified and toughened to improve putty performance.

Fillers mainly play a filling role, and commonly used are calcium carbonate, talcum powder and quartz sand. Attention should be paid to the combination of packing fineness.

Additives include thickeners, water retention agents, etc. Thickeners and water-retaining agents play the role of water retention, improve storage and construction performance, and cellulose is generally used. Antifreeze is mainly used to improve the storage stability of putty at low temperature, and slip agents and water reducers are generally used in high-grade putty to improve the construction performance of putty.

Some also add fibers to resist cracking.

If you want the floor tiles, you can remove them with a putty scraper, and if you want the floor, you can wipe them with a wet towel.

Brother told you to use a mop to mop the edge to get wet, and then use a greasy shovel to give money.

Spend 2 yuan to buy a gray knife to shovel it off, and insert it several times with a wet towel to fall off.

Mop it down with a wet mop and wipe it off with a dry cloth!

With a wallpaper knife, gently scrape off.