What should I do if the HP LaserJet P1007 has a status error when printing?

Cancel the print job, turn off the printer, restart the printer and give the print command again.

Printing usually refers to the output of visible data such as text or ** in a computer or other electronic device on a paper or other record through a printer.

In order for printers to be shared smoothly, the File and Printer Sharing Agreement must be installed on both the host and the client.

Right-click on the "Network Neighbors" on the desktop, select the "Properties" command, enter the "Network Connections" folder, right-click on the "Local Connections" icon, and select the "Properties" command.

I have the same problem, and I changed a data cable to solve it perfectly,,, which is so cool.

First of all, confirm that there is no error in the printer itself, please click Start -- Settings -- Printer and Fax (Device and Printer) -- See the printer icon and put the mouse on the icon to confirm whether the status document is readyDocument 0 If it is not recommended to delete the document, restart the computer, if it is normal, it is recommended to print the test page to see if it can be printed, and if not, you can reinstall the driver, if the above information does not solve your problem.

1. Turn off the printer first.

2. Right-click on the computer and click 'Manage' on the pop-up menu.

3. After opening, click 'Service' on the left at 5261.4102.

4. After opening, find the 'printspooler' service on the right, right-click on it, and click on the 'Properties' on the menu.

5. After opening the properties window, click the start button to start the service.

1. If the printer is in the wrong state, you need to set the printer as the default printer. To do this, click Start, then find Devices & Printers, open the printer window, right-click the mouse, and set the printer as the default printer in the box that pops up.

2. The printer is in an error state, and it may be caused by the free space of the hard disk is too small, and the solution is: delete some unused files in the computer, and you can do disk cleaning. 3. The printer displays an error state, and it may be caused by the printer's driver being damaged, at this time, you can reinstall the driver, and then print.

Not this problem.

The printer is jammed, the paper has been taken out, and now the display screen has been with an exclamation mark, and the display of E2, and the printer has also turned on and off.

The printer shows E2, which is the wrong cartridge**. The reasons and solutions are as follows: 1. The printer toner cartridge is not installed correctly, take out the toner cartridge and reinstall it.

2. If the quality of the printer toner cartridge itself is damaged, replace it with a new toner cartridge for testing. 3. If the printer power board fails, replace the power board for testing. 4. If the toner cartridge sensor is damaged, contact the after-sales service to replace the sensor.

The above issues have been troubled, but it still cannot be printed.

That's because the paper is stuck.

Can I continue printing when I turn the computer back on and place the paper?

Hello dear, the status of the HP printer is wrong, the reason: Generally, if the printing task is sent at the same time when the networked printer is shared, an error will occur; Another reason is that it is easy to make mistakes when sending and printing and opening the Internet at the same time, and when the web page is not enough flash. When printing and sending, the antivirus software sometimes synchronizes the operation and thinks it is toxic, and the printer makes an error.

Avoid the way, try not to print synchronously, it just so happens that there is no way but to re-switch the printer; Try not to open other office software, new web pages, and other flash-hungry operations when the sending and printing is not completed. Solution: 1. Delete the print job.

2. Start the Settings Management Tools service, find the print spooler, double-click, and click Stop in the regular section. 3. Then click Start Run, enter spool, open the printers folder, delete all the things in it, and then click to start the print spooler in the general tab. 4. Disconnect the printer from power for one minute, then connect and restart the computer.

The above is the cause and solution of the HP printer status error, I hope it can help you.

After using barcode printing software to make barcode labels, some customers are directly connected to the printer for printing, and some customers are output PDF documents for printing, so if there is a printing error when connecting to the printer or outputting PDF documents, how to solve it. The details are as follows:

1.If there is a printing error when outputting a PDF document, it is usually due to insufficient memory allocation and you need to change the memory to a larger one. Here's how it works:

Right-click on the software - open the file location - find it in the installation directory of the software can be right-clicked - open, or you can directly double-click to open), change the default xmx=512m to xmx=1024m

2.After clicking Print, the printer does not respond, and the software pops up a printing error: The printer was not found, and the operation is as follows:

If this happens, it may be that the printer driver is not installed correctly or there is a problem with the print driver, you can reinstall it, if it still doesn't work after reinstallation, you can switch the current printer to another printer in the barcode printing software, and then switch back.

What happened to the HP LaserJet M1005 printing error.

Hello! Scanner Error is an error reported by the hardware of the printer scanning component, please turn off the power and disconnect all data cables, let it stand for half an hour, and restart the machine. 1. If the problem is still there, you can operate the factory reset action, in the printer panel, press the OK key to enter, press the arrow keys to find Service, press OK to enter, press the arrow keys to find restore defaults and press OK.

2. If the above steps can not solve the problem, see if the printer LCD screen can be ready, if it can be ready, you can consider upgrading the firmware, but the firmware upgrade process can not be powered off, no one can use the printer, if the upgrade fails, the hardware may be damaged, it is recommended to contact HP personnel to lead the operation or directly contact the local maintenance center to help upgrade the firmware.