How to clean up the powder of the fire extinguisher sprayed onto the wallpaper

In recent years, the popularity of fire propaganda is high, people's awareness of fire safety has been continuously improved, many enterprises, units and individuals are equipped with fire extinguishers, although the fire extinguisher is easy to use in the emergency, but after the fire is extinguished, in the face of the fire extinguisher sprayed around the fire point a large number of residual powder and residual liquid how to deal with, most people do not know, this article for you to introduce:

Now some enterprises or individuals equipped with fire extinguishers have mastered the maintenance and use of fire extinguishers, and many people have practiced how to use fire extinguishers through fire drills and other ways, in the face of increasingly exquisite home decoration, after the use of fire extinguishers, how to minimize the damage to other parts of the site when cleaning has become a key consideration for many people.

So, how to choose a fire extinguisher, and how to clean up the residual powder and residual liquid sprayed by different types of fire extinguishers around the ignition point after extinguishing the fire?

Dry chemical fire extinguishers.

It is suitable for the initial disaster of flammable, combustible liquids and gases and live equipment, among which ammonium phosphate dry powder fire extinguisher (ABC dry powder fire extinguisher) can be used to extinguish solid material fires in addition to the above types of fires, which is a fire extinguisher for popularization. Ammonium phosphate dry powder fire extinguishing agent is insoluble in water, non-toxic, tasteless, does not corrode the container, when cleaning the site after use, just blow it clean with a fan or hair dryer, and then wipe it with a rag, if conditions permit, it can also be cleaned with alcohol or ethanol solution, the effect is better.

CO2 fire extinguisher.

It is suitable for extinguishing the initial disaster of live electrical appliances, valuable equipment, library materials, instruments and meters below 600 volts and general liquid fires, but it is much more expensive than dry powder. Carbon dioxide is a gas that will not remain and will not damage the object by leaving any traces, but it should be noted that after the carbon dioxide fire extinguisher is used indoors, ventilation should be strengthened, otherwise it will suffocate personnel.

Foam fire extinguisher.

It is most suitable for fighting liquid fires, such as petroleum products, grease and other fires; It is also suitable for fires of solid organic matter combustion, such as wood, cotton fabrics and other substances; However, it cannot extinguish fires and electrical fires of live equipment, combustible gases, light metals or water-soluble flammable and flammable liquids. Due to the large amount of water in the foam sprayed by the foam fire extinguisher, it may produce different degrees of water stains and foam pollution, which has been gradually phased out.

Master the above on-site clean-up methods after the fire, use the correct fire extinguisher to extinguish the fire, and remove the residue after the fire.

Use white vinegar or edible vinegar.

Summary. Hello, dear <>

The powder treatment method of dry powder fire extinguisher is; Use a vacuum cleaner to suck the dry powder away, collect it and dispose of it uniformly, and wipe it clean with a rag and mop after the vacuum cleaner is used up to avoid missing places. If you don't have a vacuum cleaner, sprinkle some water on the dry powder and clean it with a broom and mop. If there are still marks, you can sprinkle more water, or just rinse with water, and clean it a few times to clean it.

How to clean the powder of a dry chemical fire extinguisher.

Hello, dear <>

The powder treatment method of dry powder fire extinguisher is Shen Biyuan; Use a vacuum cleaner to suck the dry powder away, collect it and dispose of it in a unified manner, and wipe it clean with a rag and mop after the vacuum cleaner is used up to avoid missing places in the wide collapse. If you don't have a vacuum cleaner, sprinkle some water on the dry powder and clean it with a broom and mop. If there are still marks, you can sprinkle more water, or just rinse with water, and clean it a few times to clean it.

Hello, kiss the chain search <>

The dry powder of a fire extinguisher contains chemicals that are used to extinguish the fire. In general, it is relatively non-toxic. However, if too much or too much dry powder is inhaled from the firearm, it can easily evolve into aspiration pneumonia and chemical pneumonitis, which may lead to severe coughing, dyspnea and even respiratory distress and respiratory failure.

In this case, emergency deception should be carried out immediately.

There is fire extinguisher powder sticking to the iron How to clean it The iron can't get wet and it will rust.

There is fire extinguisher powder sticking to the iron How to clean it The iron can't get wet and it will rust.

Hello dear! It is best to vacuum it out.

Without a vacuum cleaner, is there any other way.

Hello dear! Ammonium phosphate dry powder fire extinguishing agent is insoluble in water, non-toxic, tasteless, does not corrode the container, when cleaning up the site after use, just blow it clean with a fan or hair dryer, and then wipe it with a rag.

Turn on the ventilation, prepare three towels for standby, prepare the trash can, sweep away the powder with a broom, turn on the faucet to flow, wet three towels, take a twist and half dry wipe and throw it into the faucet to rush, use the other two, continue to wipe, wipe it directly until it is clean, and finally wipe it again with disinfected clean water.

1. There is no good way to do this.

2. I have a suggestion to use a vacuum cleaner, remove the head of the vacuum cleaner and leave only the tube, and use the tube to aim at each part and turn on the appropriate wind to suck.

3. After the vacuum cleaner is finished, wipe it with a rag and mop.

1. There is no good way to clean it and open the window properly.

2. Dry powder is mainly some inorganic salts that can extinguish fires, plus some additives, which are not much harmful to people, and are almost the same as dust.