-
Good landlord.
Note that the product identification on the battery shell or packaging should use the text description of the specification, the battery name, trademark or brand, model specification, standard voltage, rated capacity, positive and negative poles of the power supply, as well as warning signs or descriptions, the name or abbreviation of the manufacturer and the factory number, and the implementation standard. Note that the battery label adopts secondary printing technology, under a certain light, from the side, it is obvious that the color of the barcode part is darker than the rest of the part, and the white part of the label is lightly scratched with metal objects, similar to the traces of pencil scratching. Note that the battery shell is made of special materials, which is very strong and not easy to damage, the battery can not be opened by general means, the appearance is neat, there are no excess burrs, the outer surface has a certain roughness and feels comfortable, the inner surface feels smooth, and fine longitudinal scratches can be seen under the bulb.
Note that the width of the battery electrode is the same as that of the mobile phone battery, and the isolation material between the battery charging electrodes is the same as the shell material, but it is not one; The corresponding position below the battery electrode is marked with the " " mark, and the hardware contact is bright and free of rust spots. Note that the battery should feel comfortable when pushed into the mobile phone, up and down freely, and the battery lock pressing part should be properly and firmly, and be tightly combined with the mobile phone. As far as the current range of use of batteries is concerned, lithium batteries have been widely used with their good performance.
-
You go to Ouku.com,There's a section there.,Daily problems can be checked.,At the bottom of the home page, there is a battery knowledge.,You can identify there.,Check it for you.。
Method 1: The front of the real battery has no roughness when touched with fingers, while the fake battery feels sandy when scraped with fingernails; Plastic nails on both ends of a real battery are prone to shell marks, while fake batteries are very hard.
Method 2: The seams of the upper and lower covers of the real battery are tight, while the gap between the seams of the fake battery is relatively large, especially the four corners are particularly obvious.
And some mess, see for yourself.
-
If you are buying an original E6 battery.
The battery will have a green and beautiful outer packaging, quite a big box of sparrowbranches, the back of the packaging and the box of the mobile phone have 3 IMEI codes, there is a warranty card inside, and the bulk ones are generally high imitations.
Users can distinguish the authenticity of Motorola mobile phone batteries from the following points:
1.Motorola True batteries are designed with brown wire bands, which is a high value-added design of Motorola; For counterfeit batteries, there is generally no brown wire strip design, and even if there is, it is different from Motorola batteries.
2.Printing Labels There are two steps to label printing for Motorola Gen batteries. First of all, the design and production of the Motorola logo and battery instructions are printed by the label manufacturer, while the barcode is printed by the battery manufacturer, so the color will vary. The so-called logo, instructions for use and barcode of counterfeit batteries are printed in one go, so the above colors are the same.
3.Motorola logo The logo of Motorola real battery is very smooth and bright; And the logo of counterfeit batteries is basically dim.
4.Battery shell welding The front and rear shells of Motorola True batteries are tightly welded; And most counterfeit batteries have the front and rear shells glued together and can be easily broken.
5.The M logo on the back of a Motorola phone battery and the battery case are a single unit, while the M logo on most counterfeit batteries is glued on and can be pried open with force.
Secondly, if you really want to prevent counterfeit batteries from causing damage to yourself, it is best for you to go to a franchise store designated by Motorola when buying a mobile phone or battery. The franchise stores all have authentic products to purchase the channel, as well as professional and good after-sales service.
-
If you are buying an original E6 battery.
The battery will have a green waiter to talk about the beautiful outer packaging, quite a large box, the back of the packaging and the box containing the mobile phone have 3 IMEI codes, there is a warranty card inside, and the bulk is generally a high imitation.
The following classification says 1, security class: security housekeeper (this is better than 360 mobile phone guard, because I used both of them, and then decisively deleted 360), Rising Antivirus. 2. Chat class: >>>More
Personally, I recommend the following smart phones are not bad, cost-effective, ** also within 2000: 15630 Nokia's smart phone that was just launched in 09, its main gimmick is its ARM 11 600MHz processor, plus 128MB of body memory, running super fast, running QQ and other software is very smooth and convenient; In addition, it supports 16GB Micro SDHC card expansion and 320W pixels, which is very powerful. >>>More
1: E66 I personally think the appearance is very good, when I bought the mobile phone, I was going to buy 5230, but I bought E66 as soon as I saw E66. >>>More
1. It is inevitable that there is a water channel in the screen of the water inlet, and it should be better to evaporate slowly in the future! >>>More
Unplug the mobile phone card and memory card, save the mobile phone to be used, enter * format password 12345. It should work after restarting. Note that formatting is deleted.