How do you deflate birthday balloons? How to deflate a balloon

How to deflate a balloon is as follows:1. Prepare a straw and extend it through the inflator until the bottom of the balloon neck.

2. Gently press the balloon with your hands to expel all the gas inside.

3. Then pull out the straw. Deflation is done.

Birthday balloons can be deflated with a straw. Reach the straw through the pump port to the base of the balloon's neck so that it can be deflated.

There are ways to deflate a balloon:

1. Puncture the balloon: Align the mouth of the balloon with the tip of the needle or fingernail, and gently puncture a small hole in the balloon to let the balloon expel slowly.

2. Cut the balloon: You can use scissors or a blade to slowly cut the balloon, and then let the balloon expel quickly.

3. Squeeze the balloon: gently press the mouth of the balloon with your fingers, and then press the balloon body with your fingers from the other side, and squeeze the balloon inward, so that the gas can be discharged slowly and chaotically.

A balloon is an inflatable ornament or toy made of rubber or plastic, which is usually used in parties, celebrations, advertising, publicity, children's toys and other fields. Typical balloons are paired with one containing a small bag that can produce hydrogen gas through a chemical reaction, and the other containing hydrogen and a small amount of air. When two balloons rub or squeeze each other, the pouch is squeezed out, producing a large amount of hydrogen gas, which causes the balloon to inflate rapidly.

In addition to ordinary inflatable balloons, there are now balloons of different shapes, colors, designs and materials, such as eco-friendly balloons, digital balloons, crayon balloons, etc. Balloons have the advantages of being environmentally friendly, colorful, diverse in shape, and inexpensive, bringing people joy and good memories. It is a very widely used decorative slag stall and toy and a very practical decoration.

Safety precautions when releasing balloons

1. Be careful when deflating, and do not make the balloon slam ** to avoid injury.

2. Do not puncture the balloon with a sharp tool to avoid hurting your hands.

3. When deflating, be careful not to damage the balloon architecture, especially to avoid damaging the mouth and other key parts that may be used when the balloon needs to be reinflated.

4. After the balloon is deflated, it should not be stored immediately, the balloon should be completely deflated, patted, and dried naturally before it can be stored, otherwise it is easy to breed bacteria, resulting in mildew, deformation and other problems.

5. Before deflating, confirm whether you need to write down the color and shape of the balloon so that you can adjust the balloon when you inflate it next time.

6. The correct way of deflation can allow us to better protect and maintain the balloon, and at the same time, it can also be deflated more safely.

Steps:1. We need to prepare two basic things. One is a balloon and the other is an inflatable device.

2. Put the ball leather into the inflator nozzle, pull the inflatable rod, and inflate the balloon. By constantly pumping back the handle of the inflatable rod, you can inflate the balloon and inflate it to the right size.

3. Put down the inflatable stick, and hold the ball with one hand and the ball with the other. Pull the ball mouthpiece, about 5-7cm long.

4. Stretch out your thumb and index finger with your left hand, and pull the ball mouth with your right hand to bypass the two fingers. After a circle, pull the ball mouth over and place it in the middle position.

5. At this time, the ball skin mouth is released from the right hand, and the index finger and thumb of the left hand are clamped between the ball mouth. The two fingers that hold the ball mouth are retracted, and the ball mouth will be naturally brought over to complete the knot tying operation.

Dress up the backdrop wall:

Latex balloons can be glued to the background wall with glue dots, "happy.""The letter balloon and the number balloon are placed in the middle. Next, love balloons and bobo balls can decorate the rest of the place and arrange them according to your preferences.

1. If there is no air needle, you can directly inflate it with a pump, and if there is an air pump, you can also directly charge and take the air leakage. Swim open.

2. The method is to remove the part in front of the pump that plays a clamping role, buckle, unscrew and remove it, aim the air port at the ball valve eye, press it hard, and you can pump it directly. Some pumps are simpler if they don't clamp that part, just press and hold the valve eye.