How to get rid of the aging plastic film on the door

There are many doors of different materials on the market, but in order not to be scratched during transportation, the merchant will put a plastic protective film on the surface of the door when leaving the factory to avoid affecting the appearance of the door because of scratches, but many owners have encountered the situation that the plastic film cannot be torn off, which is a headache. So, how to remove the plastic film on the door after a long time? What are the methods of security door cleaning?

Let's take a brief look at it together.

1. How to remove the plastic film on the door after a long time.

First, use a hair dryer to warm the plastic film until the bubbles bulge; Then tear off the plastic film, if there are still glue stains, you can wipe it with soapy water; Finally, wash the remaining cleaning products on the surface with clean water. Or you can also use an angle grinder and a wire brush head to polish the surface plastic clean; If there is residue, apply a wet compress with wind oil essence for 15 minutes; Finally, scrub it clean with water.

Second, what are the methods of cleaning the anti-theft door.

1. In the process of daily use, you need to regularly use a soft cloth to wipe the dust on the surface of the anti-theft door to avoid the formation of stubborn dirt, and the subsequent cleaning will be more laborious, and at the same time, it can also keep the anti-theft door bright and beautiful, leaving a better impression.

2. Small advertisements are a nightmare for many people, not tearing off will affect the appearance, tearing off may leave more ugly glue stains, according to Qeeka Home experts, to remove small advertisements can be fully soaked with wind oil essence for 5-10 minutes, and then scrubbed with water.

3. No matter what kind of material the door is, it is not allowed to use strong acid or strong alkali cleaner, and after each use of chemical cleaner, it must be washed with a large amount of water to wash the residual detergent, otherwise it is easy to corrode the paint film on the surface and reduce the gloss of the surface of the anti-theft door.

4. When cleaning the anti-theft door, you must choose a suitable method for cleaning according to the actual situation, and it should be noted that even if you encounter stubborn stains, you can not scrub with a steel wool ball, otherwise it is easy to leave scratches and affect the beauty of the anti-theft door.

Summary: The above about how to remove the plastic film on the door for a long time, and the method of cleaning the anti-theft door are introduced here, I hope it will help you.

1. First, prepare the hair dryer, rag, steel wool ball and alcohol for later use.

2. Next, use a hair dryer to blow the plastic film on the door.

3. Wait until the hair dryer blows the plastic film out of the bubbles and tear it off by hand.

4. Then gently wipe the remaining plastic film on the door with a steel wool ball, and be careful not to use too much force to destroy the paint on the door.

5. Then soak a rag with alcohol and wipe the door, then it is easy to wipe it off.

6. Finally, wipe the door clean with a rag dipped in water.

Dear, hello, I have found out for you how to remove the aging of plastic film: 1. Apply the face oil, wipe it evenly, first pick it off with your nails, and then wipe it off with a wet towel. 2. Use a hair dryer to blow the glue and bake it hot.

3. Wipe it with wind oil essence, and it will fall off after a while, try it. 4. You can try the eraser. But at the beginning, you may feel that the more you rub, the dirtier it gets, but if you wipe it for a longer time, you will see the effect.

5. Soak it in water, put a little dish soap, and then brush it with an old toothbrush. 6. It is also OK to wipe it with a cloth dipped in alcohol or a second pot head. 7. Use transparent adhesive with good viscosity to repeatedly stick and tear, and you can remove some of the surface.

8. Wipe it off with a little sodium water, or use paint thinner. 9. Wipe the nuclear chain with a cotton swab dipped in socks and nail polish remover. 10. Use a special detergent or a stain remover to wipe the shoes.

11. If the traces that have been left for a long time have hardened, you can use a hot towel to soften it before trying.

Summary. Hello dear, I am glad to answer for you the plastic film stuck to the iron door to remove it like this. Tear off the plastic film that has been stuck to the iron door for a long time:

You can remove it by wiping it with banana water, or use a hair dryer or hot towel to warm it so that the film will blister and be easily removed when heated.

Films made of polyvinyl chloride, polyethylene, polypropylene, polystyrene and other resins for packaging and as a laminating layer. Plastic packaging and plastic packaging products occupy an increasing share in the market, especially composite plastic flexible packaging, which has been widely used in food, medicine, chemical industry and other fields, of which food packaging accounts for the largest proportion, such as beverage packaging, quick-frozen food packaging, retorted food packaging, fast food packaging, etc., these products have brought great convenience to people's lives.

Hello dear, I am glad to answer for you the plastic film stuck to the iron door to remove it like this. Tear off the plastic film that has been stuck to the iron door for a long time: you can remove it by wiping it with banana water, or use a hair dryer or hot towel to warm it, so that the film will blister and be easily removed when heated.

Films made of polyvinyl chloride, polyethylene, polypropylene, polystyrene and other resins for packaging and as a laminating layer. Plastic packaging and plastic packaging products occupy an increasing share in the market, especially composite plastic flexible packaging, which has been widely used in food, medicine, chemical industry and other fields, of which food packaging accounts for the largest proportion, such as beverage packaging, quick-frozen food packaging, retorted food packaging, fast food packaging, etc., these products have brought great convenience to people's lives. a4

<>2. Power on the hair dryer below and use hot air.

3. Blow up the plastic film on the door and tear it off by hand.

4. Take out the scouring pad and wipe the remaining plastic film on the door.

5. Take out the rag and alcohol below, and pour the alcohol on the rag.

6. Finally, wipe the door clean with a rag soaked in alcohol, as shown in the figure below.

In the film removal step, the wooden door should not be forced: 1 hair dryer (with hot air). Soon it fell, the steel wool ball (a slightly thinner steel wire), turn on the hot air, and wipe it little by little with a rag dipped in liquor, there are not many ways, and you can't wring the water.

If the hair dryer is not easy to use, 2 rags Step 2: Connect the power supply of the hair dryer and blow the air on the residual film. If it's hard to tear off?

I summarized it, if you use force, the paint on the stainless steel doors and windows may be damaged, wash the rag, slowly rub it with the prepared fine steel wool ball, be careful not to use force, and prepare tools. The third step is to wipe the door again. , 1 bottle of liquor, The first step is to use a steel wool ball to rub the new decoration after wiping, and use it when you see that the film has small bubbles blowing.

I felt like I was pulling the film off with my hands, and I felt that it was better to have the film, so as not to scratch them.

Hello, I'm glad to answer for you, removing the aging film on doors and windows, in fact, is very simple, just remember the following methods to make this problem a lot better. Method 1: We can use soap and a little ammonia mixed with turpentine oil to remove many tape stains.

Method 2: We can also use visibility-friendly adhesive with good viscosity to repeatedly stick and tear the operation, so that we can also remove some tape marks on the surface. Method 3:

We can wipe it off with a little dilute sodium water, or use paint thinners to solve the problem. Method 4: We can use a hair dryer to dry it, and then remove it with a gentle scrape.

Method 5: We can use a cotton swab dipped in nail polish or use wind oil essence to wipe it where there is tape. Method 6:

We can also use a special cleaner or sneaker stain remover to wipe it off, if it is a long-term residue that has hardened, you can use a hot towel to soften it before wiping. Method 7: It can be removed with a cleaning agent for the textile industry.

Method 8: Mix water with sulfuric acid, otherwise it will corrode, and wipe it with a cleaning ball after soaking. I hope mine was helpful to you and thank you for your question.

How do you get rid of the aging plastic film on the door?

To remove the protective film, you first need to prepare a hair dryer and use the hot air of the hair dryer to heat the protective film on the door. After heating, the protective film will be easily removed, so you can directly remove the protective film by hand. After tearing off the protective film, you can prepare a clean rag dipped in an appropriate amount of alcohol to wipe the door, so that a small area can be done.

It was wiped off, and all the protective film was torn off. Removal tips for removing the protective film on the door 1, angle grinder polishing If it is a large area of protective film, in order to prevent the protective film from tearing, you can use the angle grinder to install a wire brush to thoroughly polish the door body. If you simply tear off the film, it is likely to be ugly and damage the door paint.

Layered and rusted on the door. 2. Turn the hair dryer to the maximum, and then blow directly on the protective film for a while, and the film will slowly soften by itself. At this time, we can use an ordinary eraser or soft cloth to erase the offset printing without much effort, and it is easy to tear it off.

protective film. If there is adhesive residue on it, we can continue to blow it with air and then glue the adhesive residue with the plastic film that has just been torn off. Finally, wipe the door again with clean water to make the whole look cleaner.

3. White vinegar with a dry cleaning dishcloth dipped in white vinegar or vinegar, completely cover the part that is difficult to remove, soak completely, soak for 15-20 minutes, and then gradually wipe off the edge of the film with a rag.

How to get rid of the aging plastic film on the door How to get rid of the aging plastic film on the door.

Kiss! Hello, happy to answer your <>

It is very time-consuming to get rid of the plastic film on the door when the plastic film is aging, but if the area is large, it can be treated with steel wool balls, and if the area is small, it can also be soaked in paint and then processed. This plastic film is difficult to tear off, so scrub it slowly and not too hard when using steel wool, especially if the wooden door is too forceful, the surface of the paint can be easily damaged.

If there is a lot of glue left, so it is difficult to clean it with ordinary methods, you can use alcohol and gasoline to remove it, or you can use a hair dryer, but this method is not suitable for a long time. How to maintain the wooden door 1, do not hang too heavy things on the door, will not hit or scratch sharp objects, and will hit the wooden door hard when opening the door. 2. Do not open the door lock with wet hands, or the wooden door and door lock contain corrosion, remember to use too much force when opening the door lock or turning the door lock handle.

When the hinge works well when the metal fittings are loose, it is necessary to tighten the door immediately, and when the lock is not good, you can lubricate the key with an appropriate amount of lubricating materials such as pencil leads, I hope mine can help you <>

Do you have any other questions?