Wearing new shoes is usually a challenge, how to solve the problem of grinding on the heel of new sh

The new shoes appear to be worn by the feetGenerally, it is because the size is not suitable, and there is a situation where the heel is not followed, or because the material of the shoe is relatively hard, so the heel will be rubbed. In addition, if the shoe shape is not suitable enough, the heel will wear out the leather.

If it is because the shoes are too small and the feet are grinding,You can buy a shoe brace that is one size larger, put the shoe brace in the shoe, and let it sit for 24 hoursThe heel of the shoe will be stretched a little wider, and it will be much more comfortable to wear. If the foot is worn because of the hard material of the shoe, you can find a way to soften the material at the heelFor example, use the hot air function of the hair dryer to aim at the hard part, blow the part hot, and gently rub it with your hands to make it soft and no longer grind your feet.

When choosing shoes, be sure to try on them. Usually, you can choose according to your own yardage, but it is important to note thatThere is a gap between the sizes of different brands and manufacturers, so be sure to put them on and take a walk to see if the shoes have room for movementThe shoe wraps itself around the foot, and after walking for a long time, the foot becomes swollen and the shoe will squeeze the foot. In addition, it will be more inaccurate to try on shoes in the morning, because after the afternoon activities, the feet will be slightly largerWhen choosing shoes, it is best to choose half a size larger.

Especially leather shoes, harder materials, if you choose the right size, most of them will grind your feetYou can take out the insole in the shoe and step directly on the sole to feel whether the sole is too hard.

can be before wearing new shoesIn the position where it is easy to grind your feet in the shoes, sprinkle some talcum powder, which can not only reduce friction, but also absorb sweatMore refreshing. Choose a soft insole with a thicker heelIt can reduce the wear and tear of the heel due to long-term walking. In addition to the above methods,You can also choose to stick anti-abrasion foot stickers and stick them inside your shoes, or choose silicone foot stickers to stick to the heelsIt not only prevents shoes from falling off, but also prevents feet from being bruised.

You can buy a band-aid or a nipple patch, stick it on your heels, put on socks, and you're done.

First of all, we can put a band-aid on our back heel, or put an insole on our own, which can effectively improve this situation, if you wear socks, you can also alleviate the impact of this situation, and also avoid the new shoes grinding your feet.

You can put a band-aid on the heel of your shoe. This effectively relieves the friction between the shoe and the foot.

1. Adhesive tape: You can use adhesive tape to paste the part where the shoe and the foot grind together, and it will not be so grinding after a while. 2. Liquor:

Baijiu is volatile and a good softener. Pouring alcohol on a clean towel and gently rubbing it on the foot grinding area will make the slippers soft, which can relieve the slippers grinding feet to a certain extent. 3. Tool correction:

If the shoe version does not fit, you can use tools, hammers and other instruments to correct the shoes. <

1. Adhesive tape: You can use adhesive tape to paste the part where the shoe and the foot grind together, and it will not be so grinding after a while.

2. Liquor: Liquor is volatile and a good softener. Pouring alcohol on a clean towel and gently rubbing it on the foot grinding area will make the slippers soft, which can relieve the slippers grinding feet to a certain extent.

3. Tool correction: Some shoes are not factory from the regular manufacturers, and the shoe version does not fit, so it is necessary to use tools, hammers and other appliances to correct the core of the shoes.

4. Prop up with a drink bottle: Some new shoes don't fit perfectly with your feet. Choose a few drink bottles, cut them according to the shape of the shoes, and stuff them into the slippers to prop them up a little more, and the problem of grinding your feet can be alleviated.

1 It may be because the shoes are small.

If the shoes you buy are not suitable, whether the shoes are too large or too small, and the shoes and feet do not fit perfectly, there may be a problem of grinding the heels, so you must try them on when buying shoes, and choose shoes that fit the feet as much as possible.

Shoes that are too small will cause the skin of the foot to rub against the leather surface of the shoe, resulting in the phenomenon of grinding the foot. It is recommended to use an old newspaper dipped in some water and then wrap a layer of dry newspaper in the outer layer, stuff it into the shoes that grind the feet, seal and wrap it in a plastic bag overnight, and then take out the newspaper the next day, which can effectively alleviate the phenomenon of the shoes grinding because they are too small.

21. Reasons for shoes: In the process of making shoes, shaping chemical tablets will be used in order to set them, or the upper will not be processed in time after brushing the glue, which will lead to the upper being too hard and causing foot grinding; There are also shoes that are designed with the heel too high when designing, which can also lead to foot grinding.

2. The reason for the foot type: there is only one version of the shoes, but everyone's foot size and walking posture are different, and the shoes and feet cannot fit completely or the outer or inner characters of the shoes may cause the shoes to wear the feet.

3 can be. If the foot has not been worn out, you can only put a band-aid on the place where the shoe grinds the foot, which plays a role in softening the cushion, isolating the direct contact between the upper and the foot, and effectively alleviating the problem of shoe foot grinding.

However, if the Ashimori part has been worn out, it is recommended to apply disinfectant to the worn place and put a band-aid on it, which can protect the wound, relieve the pain of the wound, prevent it from being infected by the secondary friction injury, and facilitate the healing of the wound.

41. Shoes are too large: If the feet are worn because of the shoes being too large, you can put a half-size pad or a heel paste on the inside of the shoes, which is very good for slightly longer shoes.

2. Shoes are small: If the shoes are small and cause foot grinding, the shoes should be stretched out, and newspapers or other items can be stuffed into the shoes, and then taken out after being placed overnight can alleviate the foot grinding caused by the small shoes.

3. The upper is too hard: you can apply some alcohol or white vinegar to soften the upper of the foot, or you can use a hair dryer to blow on the upper of the foot, which can also have the effect of softening the leather surface, and the possibility of grinding the foot can be greatly reduced when you wear it next time.

1. You can use adhesive tape to stick it on the inside of the shoe. Cut a slightly larger round cotton cloth, peel off the back of the tape and glue it on.

2. Apply anti-abrasion foot ointment. Apply the ointment directly to the area being grounded, but do not apply the ointment to areas that are already blistered. For blisters that have been ground out, you can use a plaster of **blisters.

The plaster looks like an oval-shaped band-aid and acts as a cushion between the wound and the shoe, reducing the chance of infection.

3. Use special shoe support tools. Spray the shoe with a spray to make it more elastic and place the shoe grip tool inside the shoe. Adjust the length of the shoe gripper tool, adjust the size of the shoe gripper tool, and place it in the shoe for 6 to 8 hours.

When the time is up, take the tool out again through the handles and knobs. This method is very effective for loafers or dress shoes.

4. If the soles of your feet hurt, it may be because the soles are too hard. This is especially likely to happen when wearing high heels. You can buy built-in pads that are specially placed on the soles of your feet and glue them to the corresponding places in the shoes. These built-in pads are usually oval or egg-shaped.

When new leather shoes are bought, they are often too hard and uncomfortable to wear, and even the feet are red, swollen and blistered. Here are a few ways to avoid it.

You can use a wet sponge to wet the leather of the grinding part of the foot, and leave it for an hour to soften, so that it will not be so uncomfortable to wear again. But don't wet your shoes too often, as this is not conducive to protecting your shoes.

You can also use liquor to rub your feet in your shoes, soak them for about 5 15 minutes, wait for them to be slightly soft, and then put them on and walk, and you won't grind your feet after drying.

You can also spray alcohol on the cloth until it gets wet, then stuff the cloth inside your shoes and wear it the next day.

Gently pinch and rub the foot with your hands to make the shoe soft, but not too hard to avoid wrinkling the upper.

Answer 1: Use adhesive tape to stick it on the place where the shoe grinds against the foot, and it will not be too abrasive after a while.

Answer 2: Fold the piece of grinding your foot into it, recess, just like stepping on it in the same posture as wearing slippers, and then leave it for a few days to get much better.

Answer 3: Not all new shoes must be worn out, there must be something wrong with the style of the shoes you bought.

Answer 4: Cover the place where you grind your feet with a damp cloth, and then gently smash it repeatedly with a small hammer to make it soft, and then put it on without grinding your feet.

Answer 5: If you inquire about the leather shoe beauty shop, you will have a shoe business.

Smear some liquor on the place where the feet are grinding!

You can put a band-aid on the heel first, and after a while, the shoe will not be sharpened.

When the bubbles on your feet are gone, you won't grind your feet.

How to deal with shoe heel grinding better?

1. The size of the shoes is not suitable, and the feet will be worn if they are big or small, or because the shoes are too hard.

2. Shoes will use stereotype chemical tablets in the production process, and the shoes will not be treated in time during the production process, resulting in a hard upper, or the shoes are designed to be empty, and the heel is too high to cause foot grinding, so the shoes can be softened with alcohol before wearing.

3. If the shoes are too small, you can use newspapers and other items to stretch the shoes to relieve foot grinding.

4. If the shoes are too big, you can make the ruler use a heel sticker or a half-size pad to solve the problem of grinding feet.

1. Pour the liquor (about 25 grams) into the new leather shoes, shake it a few times, and put it for an hour before wearing it, the leather will no longer be hard, and the shoes will no longer clamp the feet. If the edge of the shoe is rubbing the foot, such as the heel, you can dry the wet paper towel, soak it in white wine, fix it on the shoe part of the foot grinding place with a clip, leave it overnight, and wear it again the next day without grinding the foot.

2. If the edge of the new leather shoes is partially rubbed on the feet, you can use a wet towel to cover the grinding part of the feet for a few minutes to make it wet and soft, and then use a cylindrical object (such as a glass bottle) to roll it out several times to press the grinding part of the feet smoothly and flatly, and the feet will not be rubbed again.

3. If the new leather shoes are more serious, you can use a wet towel to cover the wet, and then use the shoe wedge to prop up, and it will be smooth to wear.

4. If the sole of the new leather shoes grinds the feet, it can be put on the shoe crutches, and the hammer is struck hard to smooth the grinding of the feet, and what to do with the new shoes grinding the heels. If you don't have shoe crutches, you can also use other iron tools instead.