Which heater is better for whole house heating, and which heater is better for whole house heating

Updated on home 2024-07-13
8 answers
  1. Anonymous users2024-02-12

    There are many heaters for whole house refrigeration, which depends on the size of the house, with wind-like heaters and heaters with electric stove wires. It depends on which one the individual prefers.

  2. Anonymous users2024-02-11

    Grab no heating, of course, the radiator is good, it can be used in every room, and then it can also be used for floor heating or air conditioning.

  3. Anonymous users2024-02-10

    If the whole house is heated in the north, the floor heating should generally be selected to have a good heating effect and do not take up space.

  4. Anonymous users2024-02-09

    The heater heater is good.

    It will be heated by the electric heating pipe, and then the wind will become a warm air after passing through the heat pipe, the principle is very similar to a hair dryer, but the effect is still good, generally smaller rooms and living rooms can be used to heat up, and it also supports shaking the head left and right to blow the wind, so that every corner can have hot air. However, if you blow directly for a long time, it will still feel dry and hot, so remember not to blow directly at close range for a long time.

    The advantages of fan heating are:

    1. The heat supply of a single machine is large, and the number of terminal equipment used is small under the same heat load.

    2. The small heater can be hung without occupying the area of the building, and the large heater is installed on the ground, and the area is limited.

    3. Start and heat up quickly.

    The disadvantages of warm air limb envy machine heating are:

    1. The fan is noisy when the heater is running. Generally, the noise of small heaters is about 60db(a), and the noise of large heaters is even greater.

    2. The heaters are placed in the heating room, which directly heats the indoor circulating air, does not supplement the fresh air (outdoor air), and cannot improve the quality of the indoor air bending air.

  5. Anonymous users2024-02-08

    Whole house heating: carbon fiber heaters are best. Carbon fiber heater is a tubular heating element made of carbon fiber as the basic material for heat generation, and uses a reflective surface to dissipate heat. Integral straight barrel type and rectangular floor type:

    The straight-through type generally uses a single tube to heat up, and the fuselage can automatically rotate to heat the entire room.

    After turning on the power, the heating speed is fast, in 1 2 seconds the body has felt hot, 5 seconds the surface temperature can reach 300-700 degrees, the power can be adjusted at 600 1200W. The rectangular floor-mounted type adopts double-tube heating, which can be used on the floor or wall-mounted, and the power is relatively large, around 1800 2000W.

    Features of carbon fiber heaters:

    The carbon fiber electric heater is heated by filament carbon fiber heating element, with uniform heat dissipation, fast heating and high efficiency, and can reach 90 - 100 rated surface degree in three minutes, with strong radiation convection, and the electric heat conversion rate is more than 98%, compared with similar products on the market, such as ceramic, hot sheet, quartz, and oil heating electric heaters, saving electricity by more than 2 3.

    There is no electromagnetic interference and pollution, no dust and no noise in use. Rapid sail raising and coarse temperature: this product is connected to electricity and heated for 1-2 minutes to dissipate heat immediately; Economy:

    Carbon fiber electric heater is positioned for the general public** low and affordable, not only to save money when buying, but also to save money when using, increase the conversion of electric energy by 30% (relative to metal heating), and automatically adjust the temperature.

  6. Anonymous users2024-02-07

    Heaters, stainless steel fin heat pipes are used to achieve the purpose of heating by burning fuel, heating medium, and using convection heat dissipation. There are three common types of heat medium: hot water, steam and heat transfer oil, finned tube radiator is usually named after different heat mediums, the heat medium is hot water is called hot water finned tube radiator, the heat medium is steam is called steam finned tube radiator, and the heat medium is heat transfer oil is called heat transfer oil finned tube radiator.

    Because the heat transfer oil finned tube radiator heats up quickly, has good fluidity, and is non-toxic and odorless, the heat transfer oil finned tube heat sink is often used in the industrial field. In order to prevent dust from affecting the heat dissipation equipment, the finned tube radiator covers the mask on the finned tube radiator, which not only prevents dust and is easy to clean, but also prolongs the service life of the finned tube radiator. The heat conduction oil finned tube radiator adopts internal and external double-layer anti-corrosion technology, which greatly improves the oxidation resistance of the finned tube radiator.

    Finned tube radiator.

    With the development of recent years, the rapid development of industry, and the scale of the workshop has gradually increased, the winter heating of the workshop is becoming more and more important. Due to the excellent performance of finned tube radiator equipment and the economy of the equipment, finned tube radiator has become the first heat dissipation device considered by HVAC engineers when choosing heat exchange equipment. <>

    Finned tube radiator.

    Stainless steel fin heat pipe is a kind of heating equipment widely used in gas and liquid heat exchanger, which mainly achieves the purpose of increasing the fingers and limbs by adding fins to the base tube. Spiral finned tube radiator is a more commonly used one, spiral finned tube radiator is the use of a certain processing technology to make the fin into a spiral, the processing technology of the spiral finned tube radiator greatly increases the heat transfer efficiency of the finned tube radiator. <>

    Finned tube radiator.

  7. Anonymous users2024-02-06

    It is recommended that you use the kind of electric heater that is plugged in by the limbs, which is inspiring to be floor-mounted, easy to move, and can adjust the temperature to turn off by yourself. If there are any clothes that are not easy to dry in winter, you can also dry them when you put them on

    I have two at home, because my brother has old people and children, and every year before the heating comes, and after the heating is turned off, it will be turned on all the time.

    There is no electricity consumption as expected.

  8. Anonymous users2024-02-05

    Heater, light pipe radiator is a simple structure, excellent heat dissipation effect, strong corrosion and pressure resistance, is a steam radiator series equipment, this series of heating equipment can be based on the actual needs of the user and the size of the room area volume and steam pressure, temperature, after a comprehensive comparison of the model selection, and then processing. In more and more fields, are applied to the light pipe radiator, generally for industrial and mining enterprises, plant steam heating use more, this type of radiator structure is simple, the installation of vertical pulse bright and convenient, good heat dissipation effect, especially excellent anti-corrosion performance, so the industrial light pipe radiator is favored by more industrial and mining enterprise users.

    Optical pipe radiator.

    In the dusty air, how to ensure that the dust accumulation does not affect the heat dissipation has become a problem that needs to be solved by the light pipe radiator. With the continuous development of computational fluid dynamics, Yu Kuan tested the optical pipe radiator by simulating tiny particles, and obtained the precautionary measures to prevent dust from affecting heat dissipation, and used special technical silver code to dust the optical pipe radiator, so even if there is dust, it will not affect the heat dissipation performance of the optical pipe radiator, and only need to be gently wiped with a wet rag. <>

    Optical pipe radiator.

    Optical pipe radiators usually operate in a humid environment, and the requirements for anti-corrosion and anti-oxidation performance are also very strict. The double-layer anti-corrosion technology treatment used in the light pipe radiator, the internal use of special technology for grinding and anti-corrosion, the external selection of high anti-corrosion anti-rust paint or silver powder for painting, the combination of internal and external anti-corrosion, so that the anti-oxidation capacity of the light pipe radiator is greatly enhanced. The appearance of the light pipe radiator is fashionable and elegant, which can not only meet the needs of the operation, but also play a decorative role.

    The industrial light pipe radiator for drying has a large heat dissipation area and sufficient air volume, which can meet the needs of drying operations. <>

    Optical pipe radiator.

Related questions
13 answers2024-07-13

Installing floor heating is sure to do waterproofing, the purpose is to prevent water pipe leakage from harming the downstairs, if there is a condition to do two times waterproofing, floor heating above the layer below, if there is no condition, then do the upper layer, that is to say, after the floor heating is laid, install waterproof to do a closed water test. >>>More

12 answers2024-07-13

I heard others say that Dongyi is still good.

16 answers2024-07-13

First, the whole house customization should first look at the basic material configuration of the cabinet. It mainly depends on the configuration of materials and the level of craftsmanship. Mainly look at the hanging code and adjust the foot, the hanging code in the installation process can ensure the strength and the ability to adjust the horizontal and vertical degree of the cabinet, the load-bearing of the cabinet and the adjustment of the door panel in the future has special significance, so this installation method should become the installation standard of the cabinet. >>>More

14 answers2024-07-13

In layman's terms, it means that the whole house customization is that the decoration company will send a designer to design the decoration style and layout for you according to your needs and room layout, and then customize some home decoration according to your requirements, and finally report to the door for you to install. From design to customization to installation as one of the home customization solutions. >>>More

6 answers2024-07-13

In the whole house custom home furnishing industry, it is not an easy thing to find potential customers, but with some effective methods and strategies, the process can be made simpler and more efficient. >>>More