How to quickly give first aid when the flowers wilt, how to save the flowers when they wilt

1. Plant dehydration.

Some of our flower friends just bought the flowers in the flower market, put the flowers in the sun to maintain, but this will make the transpiration of the flowers too large, and the water absorbed by the roots is not enough for the growth of the whole plant, so there will be insufficient water and the flowers will wilt.

Solution: If it is a flower that we have just bought, then in order to avoid its transpiration and dehydration of the plant, we should prune all the leaves of the flower, and cut off some if the branches and buds are too dense. Then put it in a cool and ventilated place and take it out to bask in the sun after a week.

2. The temperature is too low.

If it is in the winter season, the leaves of the flowers wilt, that is caused by the weather is too cold, once the roots of the rose are frostbitten, then its roots will die, and the leaves and flowers will not be able to absorb nutrients, so the wilting situation will appear.

Solution: The flower is suitable for growing in a warmer environment, so once the flower is frostbitten, we have to create a warm environment for it to slowly freeze, but at this time, it should be noted that we should not put it in direct sunlight immediately after he is frostbitten, which will also make the flower not adapt to it for a while and cause the problem of yellowing of flowers and leaves.

3. Insufficient nutrients.

Some flower friends will buy flower branches and buds directly from the flower market for bottle cutting, but I never thought that it would wilt in a few days, because some of the nutrients contained in the water are not enough to continue the growth of the flower.

Solution: Now that we know that the rootless flowers that are inserted in the vase for ornamentation, it is caused by insufficient nutrients. Then we can change some clean water, and then add some nutrients to it that flowers need.

Or use cold strong tea instead of water to delay the flowering period of the vase flower arrangement.

4. Excessive fertilization.

Fertilizer is a necessary factor for the growth of peanuts, and it can be said that proper fertilization can make the flowers flourish and the fragrance of the flowers more intense. Therefore, some of our flower friends usually fertilize the flowers when they usually maintain the flowers, which can not only not make the flowers of the roses big and strong, but also cause the leaves and flowers to wilt because of excessive fertilizer and damage the roots.

Solution: At this time, we must first clean the injured root system of the flower, soak and disinfect it with potassium permanganate and then replant it, and you can add some Bika rooting agent. After that, we must pay attention to the method of fertilizing the flowers, the growth of the flower does not need too much fertilizer, we apply a small amount of fertilizer during its peak growth period, and the rest of the time can be completely replaced by rice washing water.

Here's how to save the flowers:

1. After the flowers wilt, there is no need to add water in a hurry, you need to take out the flowers calmly, cut off some leaves, and keep two or three pieces, otherwise the residual nutrients will lead to accelerated decay of the plant.

2. The rhizome needs to be re-cut to make a new incision to ensure the water absorption capacity of the plant, the incision needs to be obliquely cut at 45 degrees to increase the water absorption area, and the size of the oblique shear needs to be cut off with a diameter of 5cm.

3. Wrap the wilted flowers with newspaper to ensure that the flowers can return to erection, otherwise the branches will be bent after re-raising water.

4. At this time, the root system of the flowers is cleaned and potassium permanganate is prepared.

After soaking and disinfection, put it into the rice washing water for rescue and maintenance, and the maintenance time is half an hour. After that, it can be replanted with water, which needs to be two hours deep enough to allow the rhizomes to absorb enough water.

5. After two hours, the flowers can basically recover firmly, at this time, you need to open the newspaper, change to the normal water level to raise flowers, and let the flowers get used to it.

After the leaves are cut off and the flowers wilt, the flower branches need to be taken out and the excess leaves should be pruned; To re-cut the roots, you can use sterilized sharp scissors to cut 5 cm obliquely from the bottom of the flower branches to increase the water absorption area; Wrap newspaper, you can use newspaper to wrap the flower branches and restore the upright state; For deep water curing, the flowers can be sterilized in potassium permanganate solution, and then soaked in rice washing water for 2 hours to keep them fresh.

When you find that the flowers are wilting, you need to pour out the water in the vase, take the flowers out of the vase, keep only the upper 2 or 3 leaves, and prune off the rest of the leaves to reduce unnecessary nutrient consumption so that the plant can resume growth as soon as possible.

After that, you need to use sterilized sharp scissors to re-prune the root system so that the branches can better absorb water, and prune at an angle of 45° from the bottom of the flower branch by 5 cm. You can also cut a section of the root and mash the bottom and embed 2 3 small stones to increase the water absorption area of the branch.

When the flowers are wilted, they can also be wrapped in newspaper so that the branches can be restored to an upright state. Otherwise, after re-maintenance, the rest of the branches are still prone to dry out. Note that rose branches tend to grow upright and do not need to be wrapped in newspaper to stay upright.

You can also put the flowers into the potassium permanganate solution for soaking and disinfection, remove and wash, and then soak them in rice water for 30 minutes. Finally, the flowers can be soaked in deep water for 2 hours to restore their firmness, after which the newspaper can be removed and maintained with normal water levels.

If the roots of the plant are rotten, the rotten part needs to be removed, soaked in carbendazim solution for disinfection, and replanted in the damp soil after drying the roots. If the stems and leaves of the plant are drooping, and the soil is dry, you need to water the plant in time, put it in a cool and ventilated place to slow the pot, and feel the soil to get wet, to judge whether the plant is rotten roots, and if the roots are not rotten, the water should be cut off in time. If the plant is insected, it is necessary to prune the stems and leaves and spray insecticides.

1. How to save the flowers with rotten roots.

If your flower root system or the base of the plant is rotten and looks like it is dying, you can dig the plant out of the pot and remove the soil that is attached to the root system. Inspect the roots of the plant and if there is any rot, use a clean knife to cut off the rotten part of the plant. Then soak it in carbendazim solution for half an hour, remove it and put it in a cool and ventilated place to dry.

Wait for the incision to dry and prepare the moist soil and replant the plants in the potting soil. After that, the potted plants are moved to a diffuse and ventilated place, and the soil is close to dry before watering, usually about half a month after potting, the plants can take root and sprout again.

2. How to revive the withered flowers.

If your flower stems and leaves are hanging down and look like they are dying, then you need to judge whether the plant is short of water or has a lot of water. If the soil is dry, it means that the plant is wilting due to lack of water, and you need to move the potted plant to a cool and ventilated place, and water the plant several times, each time watering do not water thoroughly, until the stems and leaves of the plant are back erect. Cut off the dead stems and leaves, move the potted plant back to a sunny place, and weigh the weight of the potting soil, and feel that it is significantly lighter and more watered.

If the soil is wet, it means that the plant is rotten because of the large amount of water, and the treatment method of the flower with rotten roots should be referred to.

3. How to save the flowers that attract insects.

If your flower stems and leaves are full of small insects and look like they are about to die, then you need to judge what kind of insects are on the plant, and then cut off all the stems and leaves with serious insect infestations, and carry out targeted control according to the pests.

How to raise flowers. First, the soil is suitable.

Different flowers like different soil qualities, and it is necessary to know which soil quality it is suitable for growing in when breeding. If you like acid, use acidic soil. If you like alkali, prepare alkaline soil.

2. Sufficient light.

Usually flowers and plants are more light-loving, and they should be placed in the light when maintaining, and the flowers will be more gorgeous when they have enough time to see the light. But also pay attention to the intensity of light, some are not tolerant to strong light, and should be shaded and protected from light in time.

3. The temperature is suitable.

The temperature should be controlled during the breeding period, and it can grow more quickly and vigorously between 15 and 25 degrees. In summer, it is necessary to pay attention to more ventilation and cooling. Keep warm in winter and move indoors to avoid frostbite.

Fourth, appropriate watering.

There are moisture-loving and dry-loving plants, and the number of watering should be changed according to the growth habit. Moisture-loving flowers should be watered frequently to ensure sufficient moisture. If you like dryness, control the water, and wait for the soil to dry before replenishing water to avoid stagnant water.

Fifth, reasonable fertilization.

Flowers and plants consume a lot of nutrients when they bloom, so it is necessary to pay attention to timely fertilization before and after flowering. It is best to apply thin fertilizer frequently, and the diluted Pica water-soluble fertilizer can be applied to avoid burning the roots with thick fertilizer and affecting the growth.

1. Rooting water.

If the flowers are raised, there is basically a problem with the roots, and if there is a problem, they will not be able to absorb nutrients, so that the plant will die. Only by allowing the new roots of the flower to grow can the dying flower be saved, the best solution is to use rooting water, rooting water can quickly promote the time of peanut roots.

For example, if the tree is watered too much and the roots rot, the rotten roots can be disinfected at this time, and then soaked in rooting water for about three hours, and then replanted will definitely be able to save life, and grow more vigorously.

2. Hydroponic propagation.

If the root of the flower is very rotten and cannot be saved with rooting water, do not throw away the flower, most of the flowers only need to cut a branch and carry out hydroponic propagation to live, and the growth is very good. For example, a common flower, rose, anthurium, etc., can be propagated hydroponically.

If you feel that the flowers are too difficult to feed, then it is very simple to cultivate them directly with water, as long as you change the water regularly and add some water and fertilizer.

3. If the flower is not a problem with the roots, but the branches and leaves are diseased, don't throw it away, just cut off the main parts of the disease and then spray a little carbendazim to remove the disease, which can not only save life but also have a very high probability of bursting pots.

4. Watering problems.

If the leaves of the flower are yellow and wilted and about to die, this situation must be checked quickly, if it is very dry, it is a serious lack of water that causes the flower to die, at this time only need to be watered on time to save life, but also peanuts grow more lush.

For example, if the pothos is very short of water, if it is not watered in time, it will die in a few days.

5. Fertilization problems.

If the flowers are very thin, like a pair of leaves yellow, and the branches are particularly thin and soft, then it means that there is a lack of fertilizer; On the contrary, if your new leaves are very green, but the old leaves are yellow and fall off, it is actually caused by too much fertilization.

Serious lack of fertilizer is very easy to do, only need to apply more fertilizer can be saved, remember not to make too much, if too much fertilizer, you have to rinse the potting soil with water or directly change the soil.

Wilting flowers may be caused by overwatering, so it is necessary to drain the water in the potting soil in time and transfer it to a ventilated and cool environment for maintenance. Lack of light can also cause flowers to wilt, so they need to be moved to a ventilated and shaded place with astigmatism for maintenance. Excessive fertilization can also cause flowers to wilt, so you need to water the potting soil to dilute the fertilizer in the soil.

Wilting flowers may be caused by overwatering, at this time, the water in the potting soil should be drained in time, and the pot should be placed in a ventilated and cool environment for maintenance, so as to speed up the evaporation of water. When watering flowers in the later stage, you need to observe the dryness and wetness of the soil first, and wait until the potting soil is dry before watering and moisturizing properly.

Flowers are suitable for growing in a semi-shady environment, but they cannot be in a shady environment for a long time, otherwise the flowers will not be able to photosynthesize, and the inability to synthesize nutrients will lead to the wilting of the plant. At this time, the flowers need to be transferred to a ventilated and light-transmitting environment for maintenance, and an appropriate amount of astigmatism is given.

Flowers are suitable for growing in an environment with sufficient nutrients, especially during the growth period and flowering period, but too much fertilization will cause flowers to wilt, at this time it is necessary to water a lot of water in the potting soil to dilute the fertilizer in the soil, if the situation is more serious, you can properly prune the root system of the flowers, and repot for planting.

Flowers have branches all over the plant, and if not pruned in time, they can stunt the growth of new shoots and compete for nutrients and space, causing the plant to wilt. After the flowers bloom, it is also necessary to prune off the residual flowers in time to reduce the consumption of nutrients and enable the flowers to grow healthily.