Is it necessary to use tile adhesive to pave floor tiles for maintenance?

Of course, it needs to be maintained, no matter what needs to be maintained, try not to step on it too quickly after pasting, wait a minute.

The home decoration is decorated with ceramic tiles, and after the floor tiles are paved, it is logical that the maintenance work should be done, which is the maintenance of the tiles in our dialect! The main thing is to maintain the accessories used in paving the floor tiles, not to maintain the tiles.

Use maintenance, because the tile adhesive pavement floor tiles for a long time, there will be a certain amount of damage. If it is not maintained, it will lead to a shorter lifespan.

Summary. Is it okay to use tile glue to lay floor tiles.

Hello dear, this is not possible, tile adhesive for ceramic tiles to use.

There are two ways to lay floor tiles, one is dry and the other is wet. The difference between the two is:

1. Dry paving is actually a method of paving marble, 1:3 cement mortar, kneaded into a ball by hand, and flowers on the ground. The possibility of dry paving is relatively low, and it is more economical to save the construction period, but the thickness of the mortar of dry paving is relatively large (3 4cm), and dry paving can be used if large-size bricks are used in the living room.

2. Wet paving is directly smeared with cement behind the bricks, and then directly paved on the wall or ground, the wall tiles are paved with wet paving, and it is better to use wet paving if the flatness of small bricks and the ground is better, which can save the thickness of the ground.

3. The quality of the two paving methods is the same, and the choice of which method depends on the specific situation (the general masons make the right paving decisions.) Generally, the kitchen and bathroom are wet bunks, and the living room can be dry bunked. Dry floor mortar needs a certain thickness (at least 3 4cm), and kitchen floor thickness is definitely not enough, so it needs to be wet paved.

Is it okay to use tile glue to lay floor tiles.

Is it okay to use tile adhesive to lay floor tiles, hello dear, this is not possible, tile adhesive is used for ceramic tiles. There are two ways to lay floor tiles, one is dry and the other is wet. The difference between the two is:

1. Dry paving is actually a method of paving marble, 1:3 cement mortar, kneaded into a ball by hand, and flowers on the ground. The possibility of dry paving is relatively low, and it is more economical to save the construction period, but the thickness of the mortar of dry paving is relatively large (3 4cm), and dry paving can be used if large-size bricks are used in the living room.

2. Wet paving is directly smeared with cement behind the bricks, and then directly paved on the wall or ground, the wall tiles are paved with wet paving, and it is better to use wet paving if the flatness of small bricks and the ground is better, which can save the thickness of the ground. 3. The quality of the two paving methods is the same, and the choice of which method depends on the specific situation (the general masons make the right paving decisions.) Generally, the kitchen and bathroom are wet bunks, and the living room can be dry bunked.

If my answer is helpful to you, please give a thumbs up (in the lower left corner), I look forward to your like, your efforts are very important to me, and your support is also the motivation for my progress. Finally, I wish you good health and a good mood!

Summary. Pro, ceramic tiles do not have to be pasted with tile adhesive, according to the needs of users. Tile adhesive will be stronger in terms of adhesion and can save time in construction, but the cost of this material will be higher than that of cement mortar.

If cement mortar is used for construction, as long as it is completed in accordance with the process requirements, the probability of falling off will also be reduced. Compared with cement mortar, tile adhesive will have a higher adhesion to the wall.

Pro, ceramic tiles do not have to be pasted with tile adhesive, according to the needs of users. Tile adhesive will be stronger in terms of adhesion and can save time in construction, but the cost of this material will be higher than that of cement mortar. If cement mortar is used for construction, as long as it is completed in accordance with the process requirements, the probability of falling off will also be reduced.

Compared with cement mortar, tile adhesive will have a higher adhesion to the wall.

Things to pay attention to in the use of tile adhesive 1, before using ceramic tile adhesive, the surface should be cleaned up, there can be no dust and stains, or it will not affect the performance of tile adhesive, and there will be a phenomenon that the paste is not firm in the later stage. 2. In the coating of tile adhesive, we must ensure that every place is coated, and there can be no leakage, and it must be evenly smeared, so as to prevent seams.

3. The use of tile adhesive should also be paid special attention to, it can not be immersed in water, or it will directly affect its performance, and when using tile adhesive, ceramic tiles do not need to be soaked in water, after all, the water retention performance of ceramic tile adhesive is still relatively strong.

4. When using, it is still necessary to adjust according to the actual use, such as mixing tile adhesive to be used up in a short time, or it will not make the tile adhesive dry, if it is mixed, it will waste more. 5. The area of each tile should be controlled within 1 level, so as to prevent the tile glue from drying up, resulting in untimely paving, and there may be a fall in the later stage. It should be noted that if the tile adhesive is not used up, it should be stored in a cool and dry place.

1.Old tile walls can be used tile glue, and then tiled. Can be glued with tile glue.

It is a special glue for smooth tiles, and the bonding strength is also very good. Porcelain glue, also known as adhesives, clay, etc. It is a new type of modern decorative material that replaces the traditional cement sand.

The adhesion is several times that of cement mortar, which can effectively paste all kinds of stone and avoid the risk of tile falling off. Can be glued with tile glue. It is a special glue for smooth tiles, and the bonding strength is also very good.

Porcelain glue, also known as adhesives, clay, etc. It is a new type of modern decorative material that replaces the traditional cement sand.

2.The adhesion is several times that of cement mortar, which can effectively paste all kinds of stone and avoid the risk of tile falling off. If you don't want to break it up and repaint it at this time, it is recommended to use special enamel paint to paint and beautify the tile to restore the luster and smoothness of the tile in the past.

However, it is important to avoid painting the gaps in the wall so as not to affect the overall appearance. After the wall adhesive is completely dry, the next process can be carried out. Before laying the tile, it needs to be blistered, so that the tile can absorb enough moisture and no longer blister, so as to prevent the tile from absorbing the moisture in the cement mortar, so that the tiles will not fall off.

3.At the same time as shoveling off the tiles, the cement mortar layer of the tiles is also shoveled clean, and the base layer is cleaned. According to the decoration process, from bottom to top, from left to right, the overall tile paving effect is good.

Once the tiles have cured and dried thoroughly, use caulk to evenly distribute the gaps in the tiles. For freshly painted walls, in principle, it is also possible to lay tiles with tile adhesives. However, for the old stucco wall, the topcoat and putty layer must be removed in advance, and the cement mortar layer can be treated with a tile surface treatment agent after the cement mortar layer is exposed, and finally the tile adhesive is used to paste the tile.

4.Since it is not a simple matter to lay new bricks on top of the old floor tiles, it is necessary to find a reliable and professional construction party to do it, so as not to cause unnecessary trouble in the later stage. The requirements for flatness are not high, but the requirements for glue are:

Durable and strong. Construction glue, marble glue, glass glue, cement. Their requirements for the base layer are different, such as glass glue with glossy surface, and other textured surfaces, all of which must be dust-free.

Prevent collapse during installation. The reflective adhesive does not collapse.

Pro, hello, I am glad to answer for you: whether to use tile glue to answer, pro: to use tile glue to use tile glue to some extent just increase the workability of the slurry.

As long as the quality of the cement is qualified, you can do without tiles. Tile adhesive is more adhesive than cement mortar, and the construction is simple, and it can be laid directly on the dry wall. However, it is necessary to soak the tiles in advance, and stir the tile glue in proportion and leave it for 10 minutes, and then use a gear scraper to evenly wipe the wall, and then knead and press the tiles that have been placed.

Of course, it needs to be maintained, and maintenance is to make our tiles more tidy. The construction personnel should see whether the wall is fit and ventilated after pasting the tiles, and drench them after 24 hours.

From the point of view of the method of tile adhesive paving floor tiles, the personal point of view is that the tiles of tile adhesive paving the ground also need to be maintained. Because the tile adhesive paving the floor tile is a thin paste method, if we do not have good maintenance, it is easy to cause the separation of the tile adhesive and the ground joint, resulting in the occurrence of tile hollowing. That is, the shortest curing time of ceramic tiles can be shortened to 5 days, and the cement mortar must reach more than 7 days.

I don't think you need to do any maintenance, if you're really idle, you can choose to mop the floor every day to do it.

Absolutely, it's just that the cost will be higher than that of cement mortar. Tile adhesive is a new modern decoration material used for pasting decorative materials such as tiles, face tiles, and floor tiles.

Tile adhesive contains a variety of additives, specifically the functionality of tile adhesive. Generally, tile adhesive is added to provide water retention and thickening of cellulose ether, as well as to provide latex powder that increases the adhesion of tile adhesive, the most common latex powder is vinyl acetate copolymer, laurate, ethylene vinyl chloride copolymer, acrylic acid and other additives, the addition of latex powder can greatly increase the flexibility of tile adhesive and improve the role of stress, increase flexibility.

In addition, other additives are added to tile adhesives with special functional requirements, such as adding wood fiber to improve the cracking resistance of the mortar and improving the opening time, adding modified starch ether to provide anti-slip performance of the mortar, adding early strength agent to make the tile adhesive improve the strength faster, adding water repellent agent to reduce water absorption rate and provide waterproofing effect.