How to clean the floor wax after the floor is scalded by hot water? 20

One: types of floor wax.

Floor wax is divided into four states: natural wax, water-based wax, spray can wax and solid wax. From the perspective of floor wax, natural wax is the most expensive, followed by watery wax and spray can wax, and solid wax is the cheapest. From the perspective of the use effect of floor wax, natural wax is suitable for solid wood flooring; Water-based wax is suitable for laminate flooring; The spray bottle wax and solid wax are easy to flower on the floor, especially the solid wax is said to be more people and less people use it.

Industry experts recommend that in the usual care of wooden floors, it is best to buy natural nourishing wax.

Two: natural nourishing wax.

Three: floor waxing process.

Plate waxing is a measure to protect the floor, which can prolong its service life and achieve an aesthetic effect. Parquet waxing operating procedures.

1. Vacuuming: remove the attachments on the surface of the parquet and some adhesives, glues, cement, paint spots, etc.

2. Cleaning: electric mop, sauna machine, sterilization, cleaning, no damage to the floor.

3. Waxing: waxing the parquet.

4. Polishing: professional operation + polishing machine completion.

If the waxing method is improper, it will produce whitening, circle marks, and discoloration. When maintaining parquet waxing, be sure to read the following precautions. The precautions for waxing parquet are as follows:

1.Parquet waxing is the choice of waxing in sunny weather.

On rainy days, the humidity is too high and the waxing of the parquet will produce white turbidity. When the room temperature is below 5 degrees Celsius, the floor wax hardens. Do not wipe the floor with a cloth containing chemicals before waxing the parquet, as it will cause poor adhesion of the floor wax.

2.Parquet waxing removes garbage and dirt on the surface of parquet.

First, use a vacuum cleaner to remove trash and dust from the parquet surface. Wipe the stains on the parquet with a diluted neutral detergent. Hard-to-remove stains on parquet can be wiped with water.

To prevent detergent from accumulating in the trenches, wring out the cloth soaked in detergent as much as possible. As a reminder, floor wax removers can cause stains and swelling in parquet and should never be used.

3.Wax parquet with a wringed out rag.

Use a cloth that has been wrung out vigorously to wipe it off. In particular, the surface of parquet and the grooved part should be carefully wiped without leaving detergent. If there is residual detergent and moisture, it will cause the surface to be white and swollen.

4.Parquet waxing is fully dried.

The moisture on the surface of the floor and the trenches is completely dry before waxing. The time required varies depending on the season, but it usually takes more than half a day. If it is not fully dried, the floor wax will not adhere tightly to the floor surface, affecting the appearance and producing whitening.

At this time, the wax has been burned and deteriorated, and it can only be re-polished, and then waxed after polishing.

Dear, I'm glad to answer for you: the floor is permed with boiling water and whitened as follows: this is because the wood wax oil contains wax, which may be used as a base for the empty nitro paint, and after the hot thing is put on, the wax melts and infiltrates into the wood grain, and then some water vapor also penetrates, and the surface is closed after cooling, resulting in a white mark, sandpaper 180 polishing, and then 320 mesh cracks and dry lines of fine grinding, After applying wood wax oil once, wait for about 3 minutes, after the wood is absorbed, wipe off the excess wood wax oil with a cotton cloth (wipe along the wood grain), and if you do not use it, after 24 hours, use 600 mesh sandpaper to polish it smoothly along the texture (when sanding, it is white dust, it means that it is dry), and then apply wood wax oil again, and it can be used normally after 24 hours, it is recommended to use coasters for hot items to avoid this problem again.

Good Luck Flooring tells you how to deal with special stains and damage on common wood floors:

Smudges and damage Treatment.

Neutral detergents such as asphalt, rubber, oil, shoe polish, chocolate (it is recommended to use a strong detergent dedicated to Lutex).

Neutral detergents such as chalk, crayons and lipsticks (Lutex-specific cleaners are recommended) Waxes, chewing gum, paints Wrap ice cubes in plastic film and place them on the stain and carefully scrape them off.

If it can't be removed, use a strong detergent to remove it.

High heels, table legs and other heavy objects pressure depression with a towel dipped in hot water about 60-70 times several times to recover;

Cork bricks are used, and other wooden floors can not be restored if they are dented) Good floors are maintained, all floors are cleaned after cleaning, and it is best to use the maintenance products specified by the manufacturer for regular maintenance at an interval of 3-6 months, so that the gloss of the floor surface layer can be improved, and the service life of the floor can also be extended!

Note: Do not sandpaper, wax or paint the floor floor;

Do not use thinner materials such as acetone to clean the floor;

Do not hit with heavy or hard objects or cut with sharp objects.

1. For the scorched part of the parquet to be shoveled off with a knife, pay attention to the small hole that is temporarily shoveled out should not be too smooth, and finally fill the small hole with sawdust, it needs to be reminded that the sawdust must be pressed tightly in the process of filling, and then pour some 502 glue on the sawdust, and pour it into it gently, and it takes a certain amount of time for the glue to penetrate into the sawdust. After about ten minutes, the glue is almost dry, and then use a knife to polish it on it, and after smoothing it, apply a layer of paint similar to the color of the parquet floor, and then wax after the paint is completely dry, so that the parquet can return to its previous appearance.

2. Repair the parquet floor with white cement. First mix some water in the white cement, then apply it to the scorched floor, after three or four hours, smooth the cement with gauze, and then apply a paint similar to the color of the parquet floor.

3. The above two methods can be used to remedy the damage of a small area of parquet, but due to the long year, consumers are advised to contact the wood flooring manufacturer to ask professional staff to deal with the wood flooring area.

The paint was damaged, and it was impossible to deal with it. Only change the floor. However, it does not affect the use of the change. It's good to maintain it with floor oil. It is usually maintained once every six months.

First use a white cloth dipped in water to knock off the white blot, and then spray it with Bili Zo, the effect will be much better, don't spray Bi Li Zhu first, otherwise it is difficult to remove, experience talk, please refer to.

That's to burn the floor, wipe the floor clean, spray it with Bylzo Furniture Care Spray Wax and it's good right away.

Wipe the water dry first, and then add some wax.

Summary. Kiss! Hello, happy to answer your <>

Pro, the paraffin-treated floor turns white when exposed to water The durability of the wax is not good, and the floor wax peels off from the surface of the floor, resulting in diffuse reflection. Paraffin oil is insoluble in water, and when the two are mixed and shaken, the small droplets of paraffin oil are dispersed in the water, making the liquid milky white. There is a chemical term for this condition called an emulsion.

The emulsion is unstable and uneven, and will gradually stratify after long-term placement. Among them, paraffin oil is in the upper layer and water is in the lower layer, and both layers are transparent. After vigorous oscillation, it appears milky white again.

Hope mine can help you <>

If you have any other questions, you can ask me again<>

Why does the paraffin-treated floor turn white when exposed to water?

No water can drip up.

Kiss! Hello, happy to answer your <>

Dear, the white floor treated by Shi Shishen wax is due to the poor durability of the wax, the peeling of the floor wax from the surface of the floor, and the diffuse reflection phenomenon. Paraffin oil is insoluble in water, and after the two are mixed with the old gods and shaken, the small droplets of paraffin oil are dispersed in the water, making the liquid milky white. There is a chemical term for this condition called an emulsion.

The emulsion is unstable and uneven, and will gradually stratify after long-term placement. Among them, paraffin oil is in the upper layer and water is in the lower layer, and both layers are transparent. After vigorous oscillation, it appears milky white again.

Hope mine can help you <>

If you have any other questions, you can ask me again<>

Is there any way to fix it?

The best way to deal with this is to remove the wax, there are professional wax removers on the market, you can buy some and try them back.

Can a waxing company do wax removal?

Kiss Yes.

Isn't the paraffin wax already penetrating into the board, so how can it be removed?

Kiss You can remove it with waxing water.

Can you recommend a company that can be waxed?

Kiss the waxing company will do.

Flooring is an indispensable and important element in home decoration, and after a long period of use, flooring is prone to wear and tear, scratches and other problems. At the same time, the color of the floor will gradually become yellow and dull, and whitening is one of the common problems. So, how to deal with floor whitening?

1.Confirm the floor material.

First of all, it is necessary to determine the treatment method and material selection according to the material of the floor. Hardwood flooring, for example, requires specialized refurbishment, while laminate and laminate flooring can be maintained using DIY methods.

2.Hand brush the paper.

If the solid wood floor is whitened, it is necessary to manually turn the abrasive paper to remove the wear and tear on the surface of the floor and restore its original natural luster. This requires specialized skills and tools, and it is not recommended to do it yourself.

3.Use waxing agents.

If laminate flooring or laminate flooring is whitened, waxing agents can be used to restore their color. Clean the floor before use, apply wax to the surface of the floor, and wipe with a cloth to allow the floor to dry. This beautifies the surface of the floor and gives it a new glow.

4.Carry out refurbishment oil maintenance loss.

Another way is to use refurbished oil to maintain the flooring. Refurbishment oil fills small gaps in the surface of the floor and provides a bright finish. The floor needs to be cleaned before use, and then the refurbished oil is evenly applied to form a protective layer on the floor, making the floor surface smoother and brighter.

To sum up, floor whitening is a common problem, and the treatment methods vary. Before proceeding with the treatment, it is necessary to understand the material of the flooring and then choose the appropriate treatment according to its characteristics. The most important thing is to pay attention to the maintenance of the floor in daily use to prevent wear and tear and whitening.

First, the planning before choosing the floor can not be less.

1. Household flooring is more cost-effective than floor tiles.

Flooring is the latest popular decoration material and is cheaper than traditional floor tiles. If you want to save money by decorating the floor, you also need to consider the decoration style at home and choose the right floor according to the decoration style.

Flooring and floor tiles are found throughout the renovation and maintenance process, and flooring is more cost-effective. If there is floor heating at home, if there is a problem with the clan bureau, the floor is removed and repaired, and then assembled. The floor tiles have to be broken and re-paved, so that they need to be purchased again.

2. Reasonably plan the floor paving area and purchase on demand.

In order to reduce the waste of flooring in the decoration process, it is best to plan the area of the floor that needs to be used, plus the number of losses, and select it to prevent the waste of excessive floor purchase. Common laying methods for flooring: three, six, nine and one-half.

The paving method of 369 is a stepped gap structure, which usually saves materials, and the material loss is about 3%; The loss of one-half paving method is the largest, and Gao Zhaokong gives up about 5%, but the ground of this kind of laying is neat and symmetrical, and the visual effect is better.

3. Plan floor paving accessories to save money.

The accessories for floor paving include floor nails, headless nails, floor glue, moisture-proof mats, and door strips; If it is a keel floor, you need an extra keel, etc. It is the accessories of the floor that occupy a very important position in the paving of the floor, and most of the after-sales problems of the floor are directly related to the floor accessories. Therefore, choosing a good flooring accessories can save future maintenance costs.

There are several possibilities.

Your floor itself is yellow, and after applying floor wax, it highlights that the yellow detergent when cleaning the floor is too alkaline, and the detergent is not washed with clean water, and the floor wax reacts with the floor wax for too long or improper storage (such as prolonged sun exposure), and deteriorates.

The solution of 2 and 3 is only to re-wax after waxing to avoid yellowing, and the situation of 1 is the problem of the color of the floor, and there is no way to solve it by waxing.