After renovation, I found that there are aluminum scratches on the floor tiles at home, can I remove

I believe that many friends have experienced distress when decorating. For example, the floor tile was accidentally scratched by metal, leaving a metal scratch. You can't wipe it off with water, and you can't erase it with an eraser.

There are metal scratches on the floor tiles and you don't know how to remove them? Don't worry, let's take a look at the right cleaning method next time! One is tile scratches, the surface structure of the tiles is not damaged, and there are no marks on the surface of the floor after the tiles are cleaned.

The other is a metal scratch on the floor tiles. For example, scraping off the surface of a brick with an iron nail or a sharp iron tool creates scratches on the damaged brick surface. This floor tile scratch needs to be removed and repaired.

Otherwise it will soon become dirty, re-formed with black scratches.

For minor scratches that do not damage the surface structure of the tile, squeeze out part of the toothpaste from the scratches, then apply the toothpaste with a toothbrush, and wipe repeatedly in the scratches, which is equivalent to grinding, that is, repeated rubbing. As the polishing time increases, the scratches will gradually become lighter, eventually removing the scratches. However, this method is not suitable for removing all scratches, and the effect is more pronounced with light-colored tiles.

Add some water to Wu Jiefen (household detergent is also fine, but it doesn't work well) and give it moisture. Wipe the tiles that have been scratched by metal. But don't push too hard.

Otherwise, the tile will be injured, and the place you have rubbed will not have the same shine as before. So, after removing the scratches, rubbing them with a little shine will restore them.

First, dilute the hydrochloric acid, after diluting about 3%, paste dilute hydrochloric acid on thick paper or rag and gently apply it to the scratches (don't forget to wear gloves at this stage, hydrochloric acid will prevent corrosiveness). Wipe vigorously after a few minutes, and carefully wipe the floor with water a few times after wiping. Pour some of the scraped black marks with vinegar at home, and if you clean it the next day, the vinegar can chemically react with a lot of dirty things without damaging the floor tiles, which works very well.

If there is a slight mark after soaking, you can wash it off with a soft toothbrush dipped in toothpaste.

If it is a scratch caused by a heavier metal thrust, it may be more difficult to remove the scratch from the floor tile. Detergents that specialize in removing metal scratches can be used to make it easier and faster to remove metal scratches from the floor. Before first use, keep the scratch free of water, wear rubber gloves and a mask, spray detergent, and wipe repeatedly with a dry rag until the scratch disappears.

After achieving satisfactory results, it should be wiped off with water immediately to avoid residue. The cleanliness is immediately visible like a new brick surface and does no harm to the tiles.

It can be removed. If there are aluminum scratches on the floor tiles at home, you can buy a tile stain remover to remove them. Before use, wipe the tiles clean, spray with detergent, and wipe repeatedly with a dry rag until the scratches disappear.

Personally, I think this kind of scratch is very difficult to remove, after all, the impact of this kind of scratch on the floor tile is permanent, and it is very aesthetically pleasing.

It can definitely be removed. You can buy tile stain remover online to remove it.

Aluminum scratches on the tiles on the floor cannot be removed, because scratches on the tiles damage the surface of the tiles, and there is no way to repair them, unless the same tile can be found to replace.

How to remove aluminum marks on tiles:

1. Use soap and a little ammonia and turpentine to clean the tiles to make the tiles more shiny.

2. The rag is dipped in vinegar and wiped the aluminum marks on the tiles, which can be effectively removed.

3. Spray with dish soap, soap, etc., and scrub with a rag.

4. You can also apply toothpaste to the scratches of aluminum and wipe it off with a soft dry cloth.

In the past, caulk or white cement were used to repair joints. But their shortcomings are all too obvious. After a long time, it will turn black and fall off. In particular, the grease stain in the kitchen will turn yellow. Greasy ones are hard to clean.

As a substitute for the caulk, the beauty sewing agent has the characteristics of easy scrubbing, dirt resistance, no falling off, and beautiful appearance. It is the first choice for filling gaps by Honda owners, and the beauty joints in the bathroom also have a great effect on preventing water from seeping through the gaps in the tiles.

There is no tile gap to do beautiful seams, just look at the caulk is not the slightest water blocking effect, which is why, the bathroom, obviously waterproof, the wall on both sides of the bathroom will still be anti-alkali, not waterproof is not done, but sometimes the toilet water consumption is large and penetrates into the sand and dust, because there is sand and dust to block the water can not be emptied in time, it will penetrate from the cement sand dust to the wall outside the bathroom to cause anti-alkali, you bathroom to do beautiful seams, you can effectively prevent this situation.

A house is generally lived in for 10 to 20 years, do you want your tile gaps to be as bright as new, or let it go?

If the floor tiles are scratched by metal, especially aluminum alloys and other things, it is particularly easy to scratch on the tiles (it will be particularly difficult to wipe).

You can try toilet cleaner, or dilute hydrochloric acid (generally not recommended, because the concentration is not easy to grasp and will damage the tiles). Be sure to wipe the floor several times with a damp towel after cleaning. There are only a few ways to blur it, wax, blur scratches.

Other ways will only aim at the darker and darker The landlord can also try it with toothpaste.

If it doesn't work well, you can buy a deep cleaner for tiles, and it's easy to get it.

Wipe method: For tile scratches that are not serious, you can apply toothpaste and wipe vigorously with a soft cloth, and the effect should be good.

Application: Find some paint that is similar to the color of the tile and apply it to the tile.

Replacement method: If the tile scratches are more serious, you can replace them with new tiles to ensure the overall tile beauty.

Due to its low water absorption, wear resistance, acid and alkali resistance, no radiation, zero pollution and other advantages, ceramic tiles have become the first choice for people to decorate new houses. Tiles are used in living rooms, kitchens and bathrooms, which are places that people touch a lot and are prone to dirt. The use of ceramic tiles is easier to clean, so owners use ceramic tiles in these places when decorating.

The service life of each item is inseparable from daily maintenance, but careless damage, if not made up in time, will cause greater damage.

Gently sand with ultra-fine sandpaper.

Grinding and polishing, find a professional, floor tile shop may be connected.