How long is the appropriate potassium permanganate soaking fish tank, and how long does it take for

<> potassium permanganate. It generally takes 3-4 hours to soak in the fish tank. Because this drug is somewhat corrosive, it may damage the glass glue.

This will lead to leakage in the fish tank, so it is necessary to control the concentration. Usually, the tank needs to be disinfected only when the tank is turned over, so as to avoid the residue of harmful bacteria and thus prepare the fish for later fish farming. If there are fish in the tank, potassium permanganate can also be used, but at a lower concentration.

Disinfect with a medicated bath of potassium permanganate solution of 1:5000 for about 5 minutes, and the oxygen will be detonated during the process, and the state of the fish should be noted. If there are many sick fish, it is recommended that the fish pond should be treated in the same way.

1. Dark purple solution (approx. concentration): it has strong oxidation and strong sterilization ability. It can be used to disinfect baths and spittoons.

2. Purple-red solution (approx. concentration): It has the purpose of relieving itching, anti-inflammatory and preventing the spread of infection, and can be used to soak and wash tinea pedis.

3. Rose red solution (approx. concentration): disinfect vegetables, fruits and tableware. For disinfection utensils, you can soak 1 1000 potassium permanganate powder for 15 minutes, and then rinse it with running water.

After fruits and vegetables are contaminated by bacteria, they can be sterilized by soaking in a solution of this concentration for 5 minutes without changing the color and taste of fruits and vegetables. In medical treatment, this concentration solution can be used to soak mucosal parts, such as hemorrhoids. It has the effect of preventing infection, relieving itching and relieving pain.

4. Light cherry red solution (approx. concentration): It can be used to rinse the mouth, prevent oral inflammation and tooth decay, have deodorant and anti-inflammatory effects, and help reduce the ** odor emitted by axillary odor. It can also be used as an antidote, after drinking this concentration of solution, press the throat with your fingers to make it vomit, spit out the unabsorbed drugs or poisons, and make the residual drugs or poisons in the stomach be oxidized by potassium permanganate and become ineffective.

Potassium permanganate will not be completely eliminated in the fish tank, but they will oxidize and then turn into other substances. This usually takes 1-2 hours.

If you are disinfecting the fish tank, soak it for about 1 hour. Over time, it may corrode the equipment and glass glue in the fish tank.

After using potassium permanganate to disinfect the fish tank, it should be rinsed before normal use.

Use potassium permanganate to disinfect the fish tank, and generally soak it for about 1 hour. If there are fish, it is not recommended to use potassium permanganate to disinfect the fish tank. Because potassium permanganate sterilization and disinfection effect is relatively strong, it will not only kill harmful bacteria, but also kill nitrifying bacteria in the fish tank, so in the case of fish, try not to use potassium permanganate.

Unless it is a new tank disinfection and turning, a high concentration of potassium permanganate can be used, so that the disinfection will be more thorough. Even if there are no fish, the concentration should be controlled, otherwise it may corrode the glass and glue.

Potassium permanganate disinfection fish tank for about 1 hour is OK.

Speaking of disinfection, the method we often hear is to dissolve potassium permanganate into water, mix it into purple and black, and pour it into a tank to soak in the tank. In fact, there are still some problems with this method. Most of our families raise ornamental fish in aquariums, which are mainly composed of glass and glue.

If disinfected with a high concentration of potassium permanganate, the fish tank glue will not only be stained, but also corroded by the oxidation of potassium permanganate.

Tiger head tanks, mud pots and other rough inner wall tanks or basins will also adsorb potassium permanganate, which is not beautiful in the later stage and will affect the effect of cultivation. The concentration of potassium permanganate solution is difficult to grasp. It is better to use it to disinfect glass fish tanks, if it is used to disinfect the filter media, it will not only stain the filter material, but also be adsorbed to the filter media.

<> potassium permanganate.

Potassium permanganate aqueous solution has many uses in medicine, and it also has a certain effect in daily life. Potassium permanganate is a very common strong oxidizing agent, which is contained in the bleach agent used to bleach clothes in daily life, and can be used as a bleach agent for stains such as clothing.

The stubborn diseases on vegetables, such as nightshade seedling cataplexy, melon and vegetable powdery mildew, melon wilt, so that vegetables face the danger of stubble replanting, these potassium permanganate can be solved, and at the same time can supplement the two nutrients of manganese and potassium required by vegetables, which can improve the yield of vegetables and have the dual role of fertilizer.

<> time to soak the fish in potassium permanganate is generally about 15-20 minutes. This drug is a common disinfectant that can play a bactericidal effect, so it can be used to disinfect fish, and it can also have a healing effect. It should be noted that the concentration of this drug must be well controlled, if the concentration is too low, it will often not be effective, but if the concentration is too high, it will lead to the death of fish.

Potassium permanganate should not be placed directly in the fish tank, because the concentration of potassium permanganate is high, and they need to be diluted into a solution before use, and then evenly sprinkled in the fish tank.

Potassium permanganate is a common disinfectant that kills most of the bacteria in the fish tank.

Potassium permanganate not only kills harmful bacteria, but also bacteria that are beneficial to the fish. Therefore, the keeper needs to control the amount when using it to avoid damaging the ecosystem in the fish tank.

Although potassium permanganate has a disinfecting effect, the concentration used in different situations is also different:

1. Sick: When the fish is sick, the keeper can use 3% potassium permanganate to give the sick fish a medicated bath. However, the potassium permanganate should not be poured directly into the fish tank, otherwise the other fish will be affected, and the sick fish need to be kept in a separate container.

2. Disinfection: If it is a new fish tank, you can use 5% concentration of potassium permanganate to soak it. Soak for about 1 hour before you can drain the water. Before use, rinse off with clean water to avoid residue.

Yes, pay attention to the dosage, the concentration must be low under the whole tank, otherwise the fish will not be able to stand it.

Method of potassium permanganate concentrate powder for disinfection of fish tank:

1. Fish out the fish and soak the fish tank with about 3%-5% potassium permanganate.

2. Do not fish out and disinfect with potassium permanganate.

Potassium permanganate: Potassium permanganate is a black-purple, elongated prismatic crystal or granule with a blue metallic luster; Odorless; In contact with some organic matter or easy oxides, it is easy to occur, soluble in water, lye, slightly soluble in methanol, acetone, sulfuric acid, the molecular formula is KMNO4, and the molecular weight is.

The melting point is 240 °C, which is stable, but contact with flammable materials may cause disasters. Substances to avoid include reducing agents, strong acids, organic materials, flammable materials, peroxides, alcohols, and chemically active metals. In the production of chemicals, it is widely used as an oxidizing agent, such as an oxidant for saccharin, vitamin C, isoniazid and benzoic acid; It is used as a preservative, disinfectant, deodorant and antidote in medicine.

In water purification and wastewater treatment, it is used as a water treatment agent to oxidize hydrogen sulfide, phenol, iron, manganese and organic, inorganic and other pollutants to control odor and decolorization; In gas purification, trace sulfur, arsenic, phosphorus, silane, borane and sulfide can be removed; In mining metallurgy, oxidants for the separation of molybdenum from copper, the removal of impurities from zinc and cadmium, and the flotation of compounds; It is also used as a bleaching agent for special fabrics, waxes, greases and resins, an adsorbent for gas masks, and a colorant for wood and copper.

Soak for 10-15 minutes and you'll be fine. Potassium permanganate is a common disinfectant drug, which can be used to kill bacteria and fungi, and also has a ** effect on some diseases. It should be noted that the dosage must be controlled, and the soaking time must also be paid attention to, so as not to be harmful to the health of the fish.

In addition to disinfection, the fish must be tempered and watered before they can be put into the tank.

1. How long does it take for new fish to soak in potassium permanganate in the tank.

Soak the new fish in the tank with potassium permanganate for 10-15 minutes. Potassium permanganate is a common disinfectant drug, which can be used to kill bacteria and fungi, and also has a ** effect on some diseases. It should be noted that the dosage must be controlled, and the soaking time must also be paid attention to, so as not to be harmful to the health of the fish.

In addition to disinfection, the fish must be tempered and watered before they can be put into the tank.

Second, what to pay attention to when entering the tank.

1. Over-temperature: The first step in the tank is over-temperature, the purpose of over-temperature is to allow the fish to adapt to the water temperature of the fish tank, so as to avoid certain harm to the fish due to temperature changes. Slowly put the fish bag from the top of the tank, and the bottom can touch the water in the tank, so that the water temperature of the two will gradually coincide.

2. Water: After overheating, it is necessary to pass the water. Although the temperature is the same, the water quality varies, so the fish cannot be easily poured into the tank.

Scoop out the water in the bag to about one-tenth of the total, and at the same time scoop out the same amount of water from the tank and add it to the bag, exchange it again after ten minutes, and pay attention to the performance of the fish. It usually takes about five times to remove the bag and let the fish into the tank.

3. Isolation: If other fish have been raised in the tank, after the new fish enter the tank, it will often cause them some trouble, and some fish with a strong sense of territory may also attack, so during the insurance period, it is best to use isolation nets and other means, do not let the new fish and other fish have a foundation, and then cancel the isolation after a period of adaptation.

<> usually soak for about 30 minutes, if the time is too long, it will corrode the fish tank and equipment. Usually disinfection is only needed when the tank is opened, if the overall environment of the fish tank is stable, do not easily disinfect, although disinfection can kill harmful bacteria, but the beneficial bacteria can not live, so that the original ecosystem of the fish tank.

It will be destroyed, and the fish will be affected to a certain extent.

15-3 minutes.

It generally takes 15-3 minutes for potassium permanganate to sterilize fish. It is a common disinfectant that has a good killing effect on bacteria, fungi, etc. But the concentration must be well controlled, because the drug itself contains a certain amount of corrosiveness, and if used too much, it can cause burns to the gills of the fish.

Generally, if it is poured into the fish tank, the concentration is about 1-2pm. If soaked in a separate container, the concentration can be controlled in: About 5%.

Fish tank disinfection, generally speaking, is more used to use potassium permanganate to disinfection, let's talk about the general steps of using potassium permanganate disinfection. ** 1 end step method Concentration: 1 100,000 - 1 5000, i.e. 1 per 100,000 to 1 per 5,000; Due to the differences in different places, factories and delivery periods, it has caused a huge problem that the value cannot be fixed, and it is necessary to adjust it with the method of observing visibility and color 2 The disinfection method of fish tank, filter material, grass, sand, stone and other equipment is - soaking and scrubbing for 30 minutes 3 The disinfection method of fish is - medicated bath for 10 to 15 minutes, during which it is necessary to ensure that oxygen is sufficient, and it is best to have an air pump to supply air; If the fish is found to have only adverse reactions during the medicated bath, the water should be changed immediately or moved to other containers, and oxygen should be fully supplied; For well water fish farmers, potassium permanganate should not be used to disinfect the fish.

This concentration can eliminate most germs. It can also be soaked for 2 hours at a concentration of 15 parts per million or 20 parts per million, and it can basically be completely disinfected. 4. When disinfection, it is recommended to use separate disinfection methods for fish, grass and equipment.

5. Do not mix with well water or groundwater containing ferrous iron.