What a Certified Consulting Engineer Invest does

Consulting engineer refers to the technical personnel engaged in engineering consulting business in economic construction, the qualification examination certificate is very useful, and the gold content is also very high, so it has been recognized by the engineering and construction industry, there are many people who apply for this certificate examination, the employment prospects of consulting engineers are good, the work industry is very extensive, and all kinds of construction engineering projects are in need of such engineers.

Usefulness of consulting engineers:

The state stipulates that all consulting units with more than 60 people must be equipped with at least 9 engineers. It can be seen that consulting engineer talents are urgently needed in the future, so the gold content of consulting engineers is self-evident.

It is worth noting that the country ***.

On July 17, 2017, the "Measures for the Management of Engineering Consulting Units (Draft for Comments)" was issued, and an obvious change was that the engineering consulting qualifications of the units were no longer emphasized, and it was planned to introduce the credit rating mechanism of the units (divided into two credit ratings, Grade A and Grade B) to replace the old qualification management measures. In the document, it is required that the consulting outcome document must be stamped with the seal of the engineering consulting unit and the special seal of the consulting engineer (investment) who presides over the consulting business.

According to the "Ministry of Human Resources and Social Security and the National Development and Reform Commission Engineering Consulting (Investment) Professional and Technical Personnel Professional Qualification System Interim Regulations", consulting engineer (investment) qualification certificate.

Implement a registration service system. The specific work of the registration service is in charge of the China Association of Engineering Consultants. The China Association of Engineering Consultants regularly publishes the registration of the qualification certificate of consulting engineer (investment) to the public, and establishes the integrity file of the licensee.

It also provides employers with inquiry services for the information of personnel who have obtained the qualification certificate of consulting engineer (investment).

Consulting engineers have broad employment prospects and are registered consulting engineers.

Investment) can be practiced in the following areas:

1) Economic and social development planning and plan consultation;

2) Industry development planning and industrial policy consultation;

3) Special consultation on economic construction;

4) Research on investment opportunities;

5) Project proposal.

the preparation of the ; 6) Preparation of feasibility study report of engineering project;

7) Project evaluation;

8) Project financing consulting, performance follow-up evaluation, post-evaluation and training consulting services;

9) Technical consultation for project bidding;

10) Other engineering consulting services stipulated by the State Development Planning Commission.

In the future, the consulting engineering industry will become more and more standardized, and its gold content will become higher and higher, and I want to apply for the 2023 consulting engineer exam.

Don't hesitate to prepare for the exam.

Registered consultants refer to professionals with intermediate titles or above who practice in professional consulting units, engage in professional consulting business, and are registered and recognized. Registered consulting engineer (investment) refers to the professional and technical personnel who have obtained the "People's Republic of China Registered Consulting Engineer (Investment) Practice Qualification Certificate" through the examination and are engaged in engineering consulting business in economic construction after registration.

Initial registration application materials for registered consultants:

1) Fill in the "Initial Registration Application Form for Registered Consulting Engineer (Investment) Qualifications" (referred to as the Initial Registration Application Form) with the "Registered Consulting Engineer (Investment) Registration Management System (Practice Unit Version)" (hereinafter referred to as the "Application Software"), generate 1 electronic file, and print 2 copies of the initial registration application form (paste the recent 2-inch bareheaded **). Attached is the same as the application form. Recently, 1 2-inch bareheaded front.

2) "People's Republic of China Registered Consulting Engineering (Investment) Practice Qualification Certificate" (hereinafter referred to as the Practice Qualification Certificate) and 1 copy, the copy is stamped with the official seal of the practice unit.

3) The practice unit shall issue a copy of the appointment document or employment contract that is in effect for more than one year, and the applicant's professional ethics certificate, one copy of each of the above materials, and the official seal of the practice unit.

4) The practice unit shall issue one copy of the engineering consulting performance certification materials related to the application for the applicant and the application for it, and affix the official seal of the practice unit.

5) In 2003, the "People's Republic of China Registered Consulting Engineer (Investment) Qualification Certificate" of the personnel shall submit a copy of the "Registered Consulting Engineer (Investment) Qualified Personnel Training Course Completion Certificate", stamped with the official seal of the practice unit.

The conditions for consulting engineer investment are as follows:

1. Obtained a college degree in engineering discipline or economics, management science and engineering, and has been engaged in engineering consulting business for 8 years.

2. Bachelor's degree or degree, engaged in engineering consulting business for 6 years.

3. Graduated from a double bachelor's degree or a graduate class in engineering disciplines, and has been engaged in engineering consulting business for a total of 4 years.

Apply for the Consulting Engineer exam.

4. Master's degree, with a total of 3 years of experience in engineering consulting business.

5. Doctorate degree, engaged in engineering consulting business for 2 years.

6. Personnel who have obtained the above-mentioned academic qualifications or degrees in other disciplines of economics and management, or in other disciplines, have been engaged in engineering consulting business for 2 years.

Registered consulting engineer, English name: Registered consulting engineer, refers to the professional and technical personnel who have passed the national unified examination, obtained the "People's Republic of China Registered Consulting Engineer (Investment) Practice Qualification Certificate", and are engaged in engineering consulting business in economic construction after registration.

Ask an Engineer.

In December 2001, the state began to implement the qualification system for registered consulting engineers (investment). The examination work is responsible for the Ministry of Personnel and the State Development Planning Commission, and the daily work is undertaken by the Office of the National Registered Consulting Engineer Management Committee of the China Engineering Consulting Association, and the specific examination work is entrusted to the Personnel Family Examination Center of the Ministry of Personnel to organize and implement. Exams are held once a year and are generally scheduled in April.

In principle, test centers will only be set up in provincial capitals.

Registered Consulting Engineer (Investment) can practice in the following areas: economic and social development planning, plan consulting; industry development planning and industrial policy consulting; special consultation on economic construction; investment opportunity research; Preparation of project proposals; Preparation of feasibility study report of the project; Project evaluation; Project financing consulting, performance follow-up evaluation, post-evaluation and training consulting services; technical consultation on project bidding; Other engineering consulting services as prescribed by the State Development Planning Commission.

The former is mainly for the project management of the owner (Party A), and the latter is for independent intermediaries and consultants.

Now there are two types of exams: one is the investment and construction project manager exam supervised by the *** Investment Association; One is the Registered Engineering Consultant Examination administered by the Engineering Consultants Association of the Ministry of Construction.

The content and scope of their exams are basically similar, and they are currently the only professional title exams in the field of project decision-making and analysis, which is the field of your research: project investment evaluation, feasibility study analysis and financial evaluation. Previously, some projects required a project proposal and a feasibility study report.

Investment and construction project managers and registered consultants are jointly supervised by the state and the Ministry of Personnel, and the specific management of the associations China Investment Association and China Engineering Consulting Association are also affiliated to the state.

These two exams involve a lot of common content, especially the theory and practice of investment decision-making, because these two qualifications are national first-class supervisors, and the pre-project decision-making requirements are naturally very high, and these are indeed the knowledge and skills that investment construction project managers and registered consultants (investment) must master. As for the inevitable overlap of some contents, there are many overlapping contents such as registered consultants, supervision engineers, cost engineers, and even certified public accountants and certified asset appraisers.

On the one hand, these qualification examinations belong to different competent units (especially associations), which are limited by the interests of each other and do not recognize each other. On the other hand, some people who can take the exam can easily obtain a lot of relevant qualifications, while some people are difficult to understand certain knowledge (such as finance), and as a result, they are closed to any subject, resulting in some people who have passed the exam will not be able to do practical things, and some people who can do practical things are not qualified to register; Moreover, many people only want to obtain one or two qualifications, and if the so-called "overlapping" content is removed, how can it be guaranteed that these people have the necessary "overlapping" knowledge?

For investment construction project managers and registered consultants (investment), their focus is different, the former is mainly for the project management of the owner (Party A), and the latter is for independent intermediaries and consultants.

Need. Consulting engineer registration by the person to the practice unit to apply, and submit the relevant application materials, the practice unit will be the lack of sales unit after the review of the materials unified to the local preliminary examination agency, the preliminary examination agency will be the preliminary examination and stamped with the official seal of the materials unified to the China Association of Engineering Consultants, the Association will meet the initial registration conditions of the personnel reported to the National Development and Reform Commission for approval.

Those who pass the qualification examination for registered consulting engineers (investment) will obtain the "People's Republic of China Registered Consulting Engineering Qualification Certificate for Practicing Engineer or Teacher (Investment)" printed by the Ministry of Human Resources and Social Security and the National Development and Reform Commission. The certificate is valid nationwide.