Who are you looking for in a newly renovated house with bulging walls?

Decoration construction party.

You should find a renovation contractor. Most of the cracks in the wall are caused by the fact that the place that needs to be anti-crack treatment is not done or the anti-crack treatment is not standardized, and it should be repaired free of charge. Wall cracking is a relatively common phenomenon in home decoration, and there are many owners who have renovated their new houses for a period of time, or even.

Be even. Putty powder should be stirred with water for 15 minutes (30 minutes in winter is appropriate), and then stirred evenly. If the stirring is uneven, there are bubbles or powdery substances in it, and it is easy to crack and bulge in the later stage.

Keep the wall solid and dry without floating ash and dirt before scraping. The humidity of the wall or the dust on the wall will affect the bonding strength and effect of the putty layer and the wall, resulting in problems such as hollowing and delamination.

Batch scraping putty once performance plastering is too thick. The one-time plastering is too thick, which can easily lead to the drying and cracking of the putty layer, so in order to achieve a better coating effect, it is necessary to scrape the putty on the wall in batches in multiple batches, and each batch scraping should not exceed two or three millimeters.

Of course, it is to find a decoration company or a general contractor for decoration, because wall treatment is one of the most basic contents of home decoration.

Of course, you have to find someone to decorate your house. They are responsible, it's that the walls they make for you are not good enough. The quality is not up to par, so it will be packaged. Let them give you a new fix.

If you have just renovated your house, the walls are bulging. You still have to find the engineering team that made the wall for you to repair or compensate.

This depends on what causes it, and generally it may be the responsibility of the real estate company.

The walls of the newly renovated house are bulging, and it depends on whether it is the responsibility of the builder or the decoration party, and whose responsibility is to find whom.

During the warranty period, maintenance services can be provided by the decoration construction party.

Of course, I'm looking for decoration.

It is very common for walls to bulge, usually due to the settlement of the building, the poor quality of the wall materials, and possibly due to improper construction techniques. Once this situation occurs, it is necessary to deal with it in time, otherwise it will affect the aesthetics and service life of the wall, and the following are several common treatment methods:

1.Determine the cause of the bulge.

The first thing you need to do is determine what is causing the bulge. If it is because of the poor quality of the wall material, then the cause needs to be found to avoid bulging on other walls. If it is because of improper construction technology, then it is necessary to find a professional for diagnosis and treatment.

2.Cutting wall treatments.

In the case of small areas of bulging, it can be handled by cutting. First of all, you need to use a cutting machine to cut the wall of the bulge and make sure that the cutting depth reaches the foundation. Next, the wall of the bulge part was re-laid.

3.Chisel off the bricks at the bulge and re-lay them.

In the case of a large area of bulging, it is necessary to chisel off the bricks at the bulge and re-lay them. When laying bricks, it is necessary to use professional cement glue and ensure the compactness of the bricks.

4.Latex paint repair.

In the case of a small area of the bulge, it can be repaired with latex paint. First of all, you need to clean the surface of the bulge with alcohol, add some water to the latex paint, mix it thoroughly, and use a brush to apply it.

In general, the occurrence of a bulging wall does not mean that there is a major problem with the wall, but this situation still needs to be dealt with in time so as not to affect the aesthetics and service life of the wall. The choice of treatment method depends on the specific situation, and if you are not sure how to deal with it, it is best to ask a professional to perform a mid-flush treatment.

I don't know which direction this wall is in the room, if it's the east and west walls, it's either on top of your bed or on the opposite side of the bed (in Tuanduan Town, in general, the standard bedroom, the south side is the window, and your bedroom has two doors, it should be with a bathroom, right?). ）

If it's at the head of the bed, you can make a 1

The 5-meter ledge (slightly higher than the back of the bed) can be used to put picture frames, remote controls, and other things that are either decorations or used before sleeping.

If the width of the recess exceeds the width of the bed, you can also design it as a storage type and put something that is commonly used by unburning cherry blossoms, such as mats.

If the thickness is increased, if the room is opposite, you can put a TV (LCD) if the room area allows, if the space is not large, you can also make a fireplace-style arc table, the two sides of the arc are as thick as the protruding wall, and the middle can be slightly thicker.

The manufacturing method is a bit like making a wall belt, which is volleyed in 1

The height of about 2.

Inside, you can install a downward-illuminated but dim night light, and according to the overall style of the decoration, you can hang murals or other gods.

The color is the same as the wall) If it is on the side, basically it is not a big problem, or make a wardrobe block.

If there is a bulge on the decoration wall, it needs to be dealt with in time, otherwise it will affect the aesthetics of the whole home. Here are some common ways to do this:

1.Find out the bulging area: first you need to find out the location of the bulge, and then use a hook or wooden strip to peel it off, so as to find out that the cause of the bulge is caused by blisters, cracks, etc.

2.Repair bulge: If the bulge is caused by blisters, cracks, etc., it can be repaired with a repair agent.

First, polish the bulge flat, then apply the patch to the bulge, before the patch is dry, use a board or clip to flatten it, and then polish it when it is completely dry.

3.Re-glue the front sock: If the bulge is caused by the wall material coming off, it will need to be re-glued. First of all, you need to tear off the detached part and then re-stick it with wall adhesive or glue water.

4.Redecoration: If the bulge is too severe to be repaired or re-pasted, it needs to be re-decorated.

First, the bulge is turned over, then the entire wall is cut off with a cutting tool and a new material is relaid. Note that the size, color, and texture of the new material should be the same as the original wall.

To sum up, dealing with wall bulges can need to choose different methods according to different situations, such as if you deal with the defect yourself, which bureau can ask relevant professionals to help deal with it.