What are the benefits of installing a wash basin outside the bathroom?

In this way, when someone goes to the toilet in the bathroom, we can wash our hands at any time without interfering with each other. You can save a lot of time and don't have to wait outside the door.

The wash basin is placed outside, and the air flow is good, so that towels, toothbrushes, etc. are not easy to breed bacteria, dry and wet are separated, and the ground is dry, so that the elderly and children are not easy to slide.

It can be separated from wet and dry, and if two people want to use the bathroom at the same time, there will be some embarrassment, which avoids the embarrassment of going to the bathroom at the same time, and also ensures that the smell will not be mixed.

First of all, you should pay attention to the material, as well as the faucet, but also look at the cabinet; Most of the washbasins are ceramic, the glaze of the ceramic will determine the service life of the washbasin, the faucet is also very important, not only to see the water of the faucet, but also to see whether it is easy to rust the material, whether the cabinet is convenient to take care of, and whether there is a certain storage function?

You need to pay attention to the part of the wash basin, you also need to pay attention to the part of the faucet, and you also need to pay attention to the pillar part under the wash basin. This avoids poor quality and is easier to install.

First of all, we should pay attention to the water absorption index of the wash basin and the brightness of the glaze finish of the wash basin, the lower the water absorption rate, the better the quality of the ceramic product, the glaze finish and brightness are high, and the service life will be long.

Attention should be paid to the space that fits in the bathroom, and attention should be paid to the height and size, as this will make good use of the space in the bathroom.

Most washbasins will be installed on a tile wall, and the tiles will need to be perforated. If you use a drill bit dedicated to tiles, it is recommended to use an electric manual to drill the tiles and then replace them with an electric impact tool or hammer, otherwise it will cause the tiles to crack generally. If there is no dedicated drill bit, a concrete drill bit is used, and the first electric drill is used to drill through the tiles.

The installation of the bathtub also needs to be more detailed, i.e. the installation height and level. For Asia, the height of the table is usually around 80 cm. It's best to design the height of the watershed, soap table, and mirror in advance according to your family's body, and then start drilling and positioning.

It is better to borrow a laser level. If there is no water level gauge, the horizontal position of the hole can also be located to avoid installing saliva from the washbasin. When installing a washbasin, if it is a hanging cabinet, it must be fixed to the wall with expansion screws.

There is a gap between the washbasin and the tile, which can only be coated with glass glue. Of course, the glass glue should be mildew-proof, otherwise after a long period of use, the glass glue will turn black and affect the appearance.

When I installed the shower tray in the studio, it was a white wall. Punching holes is relatively easy, but it's best to put waterproof PVC or PE wallpaper on the wall near the washbasin so that water doesn't splash on the wall. It will change the color and mold for a long time.

Generally speaking, businessmen bring glass cola when installing, but the quality of glass glue is very average. It's best to get the merchant to replace it with some better glue. If the merchant really disagrees, Li Gong also suggests that the owner appropriately increase some expenses, or buy some really good anti-fracture glue, or directly use beauty sealant, otherwise the glass glue will be formed after moving in, which is difficult to clean, which is harmful to your health.

The shelves in the wash basin are secured by expansion screws. Cellophane is used to stabilize washbasins made of Tang porcelain. In general, the washbasin is placed directly on the shelf and needs to be fixed with glass glue.

Glass glue is best fixed with neutral glass glue on a mop cloth or structural adhesive. In general, the installation of the washboard is carried out after the tile floor. Glass bonding is essential.

First, the cleaning board is plugged on the tile wall, and then all the contact gaps between the board and the wall are filled with glass glue, which is both beautiful and strong.

Placing the sink outside the bathroom door is not a new design. One of its great advantages has only come in recent years – it has to do with the fact that people can't afford to buy big houses. In fact, this is a practice of three-point bathroom.

Today we're going to talk about the benefits of moving the sink out of the restroom and the considerations in this design. Well, even if your bathroom is large and the wet and dry areas are far away – moisture while bathing will inevitably make towels near the sink wet and makeup hard from the moisture. If appliances (hair dryers, razors, washing machines, etc.)

Left in a dry place, they may rust, short circuit, or affect their longevity due to water vapor.

Move the sink out of the bathroom and you'll never have to worry about it again. No matter how far the water vapor floated, it couldn't break through the blockade of that door. At that point, the sink will become a veritable "dry zone".

The utilization rate of the restroom is always a mystery – it is not the most utilized room, but people always like to use the restroom together. Especially every morning, the husband has to squat in the toilet, and the wife has to wash and put on makeup - both of which take up the toilet for at least half an hour. In fact, it is more convenient to move the washbasin outside.

During the morning rush hour, people washing and going to the toilet do not clash with each other, saving a lot of ineffective waiting time. If there are elderly or children at home, and you just want to go into the bathroom to wash your face with your hands, and the floor is full of water stains, it is especially easy to slip. If you have an external sink to wash your hands before and after eating, the soles of your feet will not get wet as often.

If you can, you can put a huge washing machine in the external washing machine, so that you don't have to worry about being eroded by water vapor, and the layout of the circulation line is more convenient. You can throw the laundry you want to wash in the washing machine before taking a shower and wash it after taking a shower. If it is placed on the balcony, although it is convenient to dry clothes, some local properties may not agree to install a washing machine on the balcony, and some also need to close the balcony, which is too troublesome.

It is better to leave the washing machine outside, it is much more convenient. It was convenient to prepare a bucket and bring it to the balcony when drying clothes. That's how my house works.

It's been like this for more than ten years, and I don't feel inconvenient. Of course, some families will also prepare a dryer, which will be more convenient to build under the sink, but I prefer clothes that have been dried. The best solution to this problem is to use a three-point toilet.

That is, on the basis of the dry and wet separation partition, add another partition to separate the toilet and the washbasin, so that they can be used at the same time.

The advantage is that you can wash your hands when others go to the toilet, do not disturb each other, and you can protect the privacy of others, and you can use it without conflict.

Many people choose to install the handwashing station outside the bathroom, so that they can wash their hands and wash some items when others use the toilet.

The advantage of this is that it looks more beautiful, and it is also more convenient and can play a particularly space-saving role.

The bathroom wash basin is an indispensable equipment device for the bathroom containing eggplant, and the size of the bathroom wash basin is selected by the different sizes of the toilet decoration design and other celery car surfaces, and the following will introduce to you what needs to be paid attention to in the installation of the bathroom wash basin, and what are the specifications of the bathroom wash basin.

1. What should be paid attention to in the installation of bathroom wash basins?

1. The washing basin product should be smooth and crackable. The drain plug should have an overflow hole with a diameter of not less than 8mm.

2. When the drainage plug and the washing basin are connected, the overflow hole of the drainage plug should be aligned with the overflow hole of the washing basin as far as possible to ensure that the overflow part is unblocked, and the upper end face of the drainage hydrant should be lower than the bottom of the washing basin after inlaying.

3. The bracket fixing bolts can be not less than 6mm galvanized open bolts or galvanized metal expansion bolts, if the wall is a perforated brick, it is strictly forbidden to use expansion bolts.

4. After the washing basin is connected with the drainage pipe, it should be firm and dense, and easy to disassemble, and the connection should not be open. The contact between the sink and the wall should be caulked with silicone paste.

5. If the sink drain trap and faucet are plating products, the plating shall not be damaged during installation.

Second, what are the specifications of the bathroom wash and discuss the first inspection of the hand basin.

1. Common shapes.

There are many sizes of wash basins, first take a look at the size of the common shape of the wash basin, the common sizes of the wash basin are: rectangular, round, fan, etc. The rectangular washbasin size is in the specification range of 600400mm, 600460mm, 800500mm, while the round washbasin size is 400mm, 460mm or 600mm.

2. Common specifications.

Choosing the right wash basin size has a big impact on our future use, and of course the size of the wash basin also depends on the size of the bathroom. Usually the size of the small wash basin on the market is 310mm, and other specifications include 330360mm, 600400mm, 800500mm, etc., mainly depending on the size of the bathroom.

3. Height. The height of the wash basin is also a point that cannot be ignored, if the wash basin is installed too high, it is inconvenient to use, and if it is too low, it will make people feel uncomfortable when using. Especially for wall-mounted wash basins, the installation height should be kept between the height of the countertop and the ground between 80-85cm, and if the height is special, it should be installed according to the specific height of the user.

4. Wash basin At present, modern families buy more ceramic type wash basins, and the wash basins are equipped with bathroom cabinets under the wash basins, and the mirror cabinets above the wash basins, and the specifications of the common bathroom sink bathroom cabinets are and These are the common sizes of the wash basin and bathroom cabinets.

The above is what needs to be paid attention to in the installation of bathroom wash basins, and what are the specifications of bathroom wash basins, I hope to help you understand the relevant knowledge of bathroom wash basins, more decoration knowledge, decoration company evaluation, decoration cases, please continue to pay attention.