-
There are many processes in the decoration that must be constructed in order, otherwise there will be problems if the installation is wrong. For example, most people don't know what is the right order to stick wall tiles or floor tiles first, and they often ignore it, and they only realize that they are miserable when something goes wrong.
My family didn't understand it at the time, so they let the workers do the work, and now there are too many problems. During construction, the correct approach should be to paste the wall tiles first, and then to pave the floor tiles, the wall tiles should be pasted in the order from top to bottom, and the distance of a tile should be left at the bottom, so that we can use the wall tiles to press the floor tiles when paving the floor tiles, so as to ensure that the water of the wall can flow directly to the floor tiles.
If the floor tiles are installed first, it will delay a lot of man-hours, because the floor tiles need time to be fixed, and you can't step on the floor tiles at this time, so as not to cause cracking and hollowing in the later stage of the paved floor tiles.
My house is because of the first installation of floor tiles, when making wall tiles, accidentally dropped some debris into the floor drain, resulting in a slight blockage, the use experience is very bad.
Therefore, we try to install wall tiles during construction, leave a row of blanks, and paste the floor tiles, and wait until the floor tiles are fixed, and then the remaining row of wall tiles can be paved, which is the correct construction sequence.
-
Generally speaking, the tiles are pasted first and then the wall panels are made. If the back is tiled, it will stain the wall panel.
-
1. All of them are actually available for 2 plans. There's just one question involved. Whoever sticks the building materials will come to close.
I'll give you a suggestion. Or the stone is pasted first. When the time comes, the bricks will come to close the mouth.
When the brick is pressed against your stone, you can't see the seams in the stone. The seams of the bricks are made with grout.
-
Upstairs is right, it mainly depends on who will close the mouth more reasonable and better-looking.
-
Generally, the bricks are laid first and then the stairs are installed.
In the past, because the mechanical cutting process of stone could not keep up, the handrail was installed first, and then the brick body was opened a gap and then pasted on, but the result of this is that there is a rectangular gap on the stairs at a glance, which is not beautiful, but because the process is limited, it can only be like this.
When the tiles are laid, the mortar must be full, and then the bricks are laid flatly, and then the holes are drilled with a marble drill, so that there will be no unsightly gaps like the previous backward technology.
There are some details to pay attention to in the decoration of the stairs. For example, the corner of the staircase must not be sharp, otherwise once a person falls, it is very easy to hurt the elderly and children.
-
Duplex structure interior staircase?
Install the stairs first and then put the tiles.
The main thing is that it is convenient to install stairs without damaging the tiles that have been formed.
-
The general wooden stair railing or metal railing has embedded parts, the railing is installed on the embedded parts, and the embedded parts can be installed before and after tiling, depending on the degree of beauty and firmness you require. However, the railing column generally has a flange cover, even if the solder joints or fasteners that fix the railing are not good-looking, the flange cover can also be covered. It is recommended that it is best to install stair railings after the tiles are pasted, so that you don't have to destroy the floor tiles, I hope it can help you.
-
It should be pasted with the floor tiles on the second floor first, and then withdraw, and paste the staircase tiles while retreating. This way it will be ready to use in a few days.
-
It is recommended to paste the floor tiles of the second layer first, otherwise the landlord will stain the floor of the stairs when pasting the floor tiles, and even when moving bricks and transporting tools, it is easy to bump into the floor tiles of the stairs, and it is better to wait for a few days to use the floor tiles, because the cement has not come up after a short time, and it is easy for workers to step on it when moving things.
-
Generally, the first and second floors are pasted first, and finally the stairs are completed, because the stairs have to transport materials up and down and move around.
-
On the way to learn the scriptures, Tang Seng successively subdued three apprentices: Sun Wukong, Zhu Bajie, Sha Seng, and named: Wukong (taken by Bodhi Patriarch, Tang Seng gave the alias Xingren), Wu Neng, Wu Jing, and then with the assistance of three apprentices and Bailongma, after a lot of hardships, finally retrieved 35 scriptures from the West Heaven Leiyin Temple.
The merit is complete, and the promotion is the right result, and he is given the title of Zhantan Merit Buddha.
-
Fix the embedded iron first, and then you can lay the floor tiles. When laying floor tiles, at the same time, cut the place with embedded iron with a cutting machine, and then install stair railings when the strength of the floor tiles reaches it.
-
It is good to install stair railings first, and then lay stair floor tiles, but it depends on the situation. Padalon railings.
-
Dig the floor tiles first, and then make holes in them and install escalators.
-
The general practice is to lay the wall tiles first, and then pave the floor tiles, which is because the wall tiles are paved and the floor tiles are paved, which will not affect the wall tiles and do not delay the construction period, so the general construction party will take this approach. On the contrary, if the floor tiles are paved first, and then the wall tiles are paved, the wall tiles must be paved after the tiles are dry, and the wall tiles are paved directly, and the wall tiles are stepped on, which will artificially cause the hollowing, loosening and unequal height of the tiles. Therefore, the general practice is to lay wall tiles first to effectively ensure the consistency of the bricklayer construction, do not delay the construction period, and apply tile adhesive.
-
In fact, it is possible to lay the wall tiles first and later. The advantage of laying floor tiles first is that the joints of wall and floor tiles are on the wall, and the aesthetics is relatively good, and the disadvantage is that the floor tiles are paved first, and the wall tiles can only be pasted after the tiles are dry, which increases the construction time; Secondly, if the floor tiles are paved first, it is easy to scratch the finished floor tiles during the construction of wall tiles, and the finished product needs to be protected.
Generally speaking, there are more advantages of sticking wall tiles first, which can reduce the difficulty of construction, reduce the hollowing of the lower wall tiles, shorten the construction period, and there is no obvious difference after completion.
-
Usually the wall is followed by the ground, and the ground is easy to pollute the ground first.
It doesn't matter if you want to do art paint and then make wainscoting, if you need art paint, it is recommended to choose Carberry. >>>More
At present, the main glue on the market is urea aldehyde glue and melamine glue, the production process of uraldehyde glue is simple, the equipment requirements are not high, and it is mostly produced by many small workshops, but the formaldehyde release is larger, but because of its low price, it is mainly used by woodworking boards, medium and low-density fiberboards, which are used in the substrate bonding with a large amount of glue, so the wall panel often contains a certain amount of formaldehyde, which is harmful to the human body.
When decorating the wall, because there are more decoration materials on the market, many people will also have difficulty in choosing, and even feel dazzled, and they don't know which decoration materials should be used. As an adult, you should know that when decorating the wall, there are wainscoting, wall paint, wallpaper, or wall cloth, and these 4 kinds of wall decoration materials are the first choice for many people. Because I think of wall paint as the most durable, but also the most widely used decoration wall material. >>>More
For the decoration of a new house, the construction sequence is very important, take the balcony as an example. In order to increase the utilization of space, many families will choose to seal the balcony with windows and transform it into a laundry room, sun room and so on. Regardless of the design, you must consider, should you seal the windows first, or put tiles first? >>>More
Decoration is the need to do carpentry first, and finally do paint and whitewash, and the ceiling is carpentry.