What are the ways to make sculptures out of cement?

The glass silk cloth is laminated on the surface of the solid sample with a binder to form a mounting covering layer composed of a plurality of mounting covering blocks; remove the mounting and pasting covering layer, form a soft cavity mold after assembly, and set a frame around the periphery of the soft cavity mold, pour cement mixture into the soft cavity mold, and pour sand into the space between the surface of the soft mold and the frame at the same time; After the cement mixture is cured, remove the frame, sand and soft mold; Rough sculpture products, after finishing to obtain sculpture products; The method is low cost, convenient construction, and the soft cavity mold can be used many times to make sculpture with cement. The production method is low cost, the construction is convenient, and the soft cavity mold can be used many times. However, the cement sculpture has very high requirements for the sculptor, because the cement sculpture basically has no room for adjustment to be completed in one go, so it is a great test of the sculptor's basic skills.

To make sculptures with cement, it is more important to start with a large scale, and the large form must be grasped in order to go down and gradually complete a perfect work.

Cement sculpture is also known as concrete sculpture. It is a material extension of the form of sculpture in a broad sense, using concrete (or GRC block) as the main raw material of sculpture, the earliest application of concrete originated in ancient Rome, and China has also introduced the use of this mixed hardened material for construction after the reform and opening up, and extended to various fields. After the cement sculpture is formed, the sculpture steel structure is built in advance, and the product is shaped by the sculpture clay material to create the corresponding form, after the clay sculpture is completed, the outer mold is turned over and reinforced with gypsum, and the mixed cement slurry is poured into the steel frame.

Cast and carved in the final details, the hardened finished product is indestructible and has a long life as solid as a building. It is widely used in various large-scale sculpture constructions such as outdoor, squares, parks, and theme places. Origin and application of cement sculpture materials:

When humans began to build houses out of stone, adhesives were created in practice. Early societies used clay as a binder, and the ancient Egyptians used lime and gypsum as binders to build pyramids; The ancient Greeks continued to use this adhesive and popularized it. But it was the ancient Romans who invented cement, using a mixture of lime and water to produce cement, and it is worth mentioning that similar advanced construction techniques have also appeared in Mexico and the central United States.

Cement sculpture is constantly favored by everyone for its strong plasticity, easy operation, solid durability and low cost, and is often used to make cement sculptures such as imitation stone landscape cement sculptures and cement rockery sculptures. The production of cement sculpture is the same as other sculpture enlargement steps, first design and make clay sculpture samples, after determining the clay sculpture sample, the shape should be enlarged, there are several ways to enlarge, the use of magnifier method, ferrule method (bread slice method), naked eye estimation method and so on.

The method of making sculpture with cement, it is characterized in that: making clay sculpture solid sample: making 1 1 sculpture solid sample with clay or gypsum, and then filling the fine concave and convex surface of solid sample surface with cement; Fabricated mounting covering:

Glass filament cloth is laminated and covered on the solid sample surface with adhesive, forms the mounting covering layer that is made up by mounting covering block combination, and is segmented horizontally from bottom to top, and is provided with the "sub-opening" that is used for connection at the junction of adjacent two mounting covering blocks and the horizontal section junction; Make a soft cavity film: remove the mounting covering layer in blocks, remove the cement that the solid sample surface fills, then the mounting covering layer is restored and combined on the solid sample surface, and inject molding glue into the cavity formed by the inner wall of the mounting covering layer and the solid sample surface, remove the mounting covering layer and the molding glue after the molding glue is cured, and the molding adhesive is bonded on the corresponding position of the inner wall of the mounting covering layer, form a soft cavity mold; Pouring cement mixture: assembling horizontal section soft cavity mold step by step from bottom to top, and pouring cement mixture into soft cavity mold in sections, at the same time in soft cavity mold periphery segmentation is provided with enclosing frame, and segmented to the space formed by enclosing frame and soft cavity mold surface, pouring sand until pouring is completed; Finishing:

After the cement mixture is solidified, remove the sand and frame, and then remove the soft cavity mold, sort out the surface of the cement sculpture, and finally make sculpture products.

First of all, make a sculptural prototype; Then use a binder to mount the glass silk cloth on the surface of the solid sample to form a mounting covering layer composed of a plurality of mounting covering blocks; remove the mounting and pasting covering layer, form a soft cavity mold after assembly, set up a frame around the periphery of the soft cavity mold, pour cement mixture into the soft cavity mold, and pour sand into the space between the surface of the soft cavity mold and the frame at the same time;

After the cement mixture is cured, remove the frame, sand and soft mold; Rough sculpture products, after finishing to obtain sculpture products;

1. Prepare the materials required for cement sculpture on site: In fact, the cement sculpture method is similar to that of the rockery, and the materials required are similar.

First of all, the sculpture master calculates the amount of materials according to the size of the sculpture, cement, steel bar, angle iron, sand, steel wire mesh, and prepares materials on site.

Put it in a flat place, pay attention to the place where the materials are stacked, and it should be rainproof and moisture-proof, and there should be a certain space to facilitate the cutting and transportation of materials.

2. The welded sculpture skeleton is usually welded with different materials of square steel, angle iron, coarse steel bar, and fine steel bar, just like the bone support that the human body needs, and the sculpture is the same.

When the skeleton is welded, it must be welded firmly to ensure the quality, the stability of the sculpture, not to collapse, not to tilt. After the skeleton is welded, the general outline of the sculpture is reflected.

Weld from the large structure, and then weld the rest of the vacant places with thin steel bars, maintain a certain spacing, and weld each part in place. After the welding is completed, the welding wire mesh is laid so that the next step can be carried out.

3. After the first plastering welded wire mesh laying of the cement sculpture is completed, it is necessary to carry out the first plastering production, generally when the first time to plaster the cement, the action is very fast, from the inside to the outside, this process requires the cement to cover the steel wire mesh.

4. Sculpture modeling.

Methods of making sculptures from cement:

1. First of all, make a real sample of the sculpture;

2. The glass filament cloth is then mounted on the surface of the solid sample with an adhesive to form a mounting covering layer composed of multiple mounting covering blocks;

3. Remove the mounting and pasting covering layer, form a soft cavity mold after assembly, set up a frame around the soft cavity mold, pour cement mixture into the soft cavity mold, and pour sand into the space between the surface of the soft cavity mold and the surrounding frame;

4. After the cement mixture is solidified, remove the frame, sand and soft mold;

5. Rough sculpture products, and sculpture products after finishing;

6. The method has low cost, convenient construction, and the soft cavity mold can be used many times.

e5a48de588b662616964757a686964616f31333337613831 Method of making sculpture from cement:

1. First of all, make a real sample of the sculpture;

2. The glass filament cloth is then mounted on the surface of the solid sample with an adhesive to form a mounting covering layer composed of multiple mounting covering blocks;

3. Remove the mounting and pasting covering layer, form a soft cavity mold after assembly, set up a frame around the soft cavity mold, pour cement mixture into the soft cavity mold, and pour sand into the space between the surface of the soft cavity mold and the surrounding frame;

4. After the cement mixture is solidified, remove the frame, sand and soft mold;

5. Rough sculpture products, and sculpture products after finishing;

6. The method has low cost, convenient construction, and the soft cavity mold can be used many times.

The method of making sculptures from cement is characterized by:

a) make clay sculpture sample: make 1 1 sculpture sample with clay or gypsum, and then fill the fine concave and convex surface of the sample surface with cement;

B) make mounting covering layer: use adhesive to laminate and cover the surface of the solid sample with glass filament cloth, form the mounting covering layer that is combined by mounting covering block, and from bottom to top horizontal segmentation of mounting covering layer, and be provided with the "sub-opening" for connection at adjacent two mounting covering block junctions and horizontal section junctions;

c) make a soft cavity film: remove the mounting covering layer in blocks, remove the cement that the solid sample surface fills, then the mounting covering layer is restored and combined on the solid sample surface, and inject the molding glue at the cavity place formed by the laminating covering layer inner wall and the solid sample surface, remove the mounting covering layer and the molding glue after the molding glue is cured, and the molding adhesive is bonded on the corresponding position of the mounting covering layer inner wall, form a soft cavity mold;

d) pouring cement mixture: assemble horizontal section soft cavity mold step by step from bottom to top, and pour cement mixture into soft cavity mold in sections, set up enclosing frame in soft cavity mould periphery segmentation simultaneously, and pour sand into the space formed by enclosing frame and soft cavity mould surface in segments, until pouring is completed;

What materials are used in cement sculptures, and what materials are used in cement sculptures.

Hello, dear. According to the sculpture material, metal sculpture, rust steel sculpture, cast copper sculpture, wrought copper sculpture, relief, now relatively rare, cast iron sculpture, cast aluminum sculpture, handicrafts, stone carving, bluestone, red sandstone, snowflake white, white marble, rough stone modeling, Kaibique, resin sculpture, ordinary FRP sculpture, sandstone sculpture, skeleton modeling, ornaments, gifts, gypsum sculpture, wooden sculpture, clay sculpture, making molds, traditional cement sculptures, porcelain stickers, etc., I hope to help you thank you. Professional people recommend Jingliang Culture.