Dongfeng Citroen Elysee how to change the navigation by itself

It is recommended to go to a professional tuning shop or 4S to change the navigation.

Install it outside and try to go to the 4S store because it involves lines that are easy to cause spontaneous combustion.

Ways to change navigation to other navigation:

1. Open the lid of the small storage box and remove the two screws.

2. Use a glue knife to pat the small display panel of the original car to pull out the tail line, and take a picture of the four screws that fix the original host.

3. Take a picture of the display screen of the small display panel of the original car.

4. Take a picture of the audio panel of the original car with a glue knife.

5. Unplug the tail cable of the audio panel of the original car and take out the main engine.

6. Pat the gear decoration plate with a plastic knife and take it out, and use a plastic knife to pat down the glove box and take it out.

7. Arrange the tail line of the small display panel of the original car to the sundries box, install and fix the small display screen to the new glove box decorative plate, lay screws and install the air conditioner and gear decorative plate.

8. Shoot out the glove box of the passenger seat, lay the tail line on the glove box, plug in the host and place it in the slot box, install the slot box, and then lead the two lines connected to the display screen to the instrument panel.

9. Plug in the tail line of the original car audio host into the instrument panel, and then plug in the tail cable of the original control panel into the instrument panel and lay the fixing screws, and install it.

Hello,You're talking about replacing the map of the upgraded navigation.,This in the navigation home can ** to their own corresponding map model of the latest lazy bag,Follow the process step by step。 If my answer is helpful to you, please set it to.

Brother Jixin Citroen Elysee disassembly and installation navigation steps:

1. If we remove the CD player on the Citroen Elysee car, if we can't disassemble it, go to the Internet to see the disassembly process of the Citroen Elysee CD player, there are generally several interior panels with screws, and you can see the screws when the interior panel is warped down;

2. Use a screwdriver to take down the four screws on the CD player, beware of the screws falling into the car during this process, in fact, it doesn't matter if they really fall, four screws, there are three, the screws just play a fixed role.

3. After the screws are removed, gently take out the CD player, there are two plugs in the back, break the clip, and separate the wiring harness from the CD player.

4. Before installing the navigation machine, we should first install the GPS antenna for navigation, put the antenna inside the table from the co-pilot position of the car, and then put the GPS antenna vertically and stand on the far right side of the table. It is placed in a standing position because the signal is best in this case.

5. Take it to navigate, install the original plug-in method, and dock with the navigation, after docking, you should fix the long line with tape, which can prevent the wiring harness from colliding with the car when driving.

6. Then according to the original way, screw it up again, and buckle the interior panel, and it's OK.