How should I install a ceiling lamp at home?

The bottom box of the ceiling lamp, which is the part where we reserve the power supply. This part is generally on the top plate, and the bottom box of the installed lamp is buried inside. After the renovation of the electrical circuit in our house is completed, the wires must be threaded to this position.

There are generally two wires in the ordinary bottom box to meet our ceiling lamp installation, which is one of the most basic conditions for the installation of ceiling lamp, which is power supply. How to install ceiling lights? I learned 5 installation steps to install the ceiling light base by myself.

In other words, after we buy the ceiling lamp, we can separate. One of the most important components is the base of the ceiling lamp.

The base of a ceiling lamp is usually made of metal or other material, and the other part is the light source of the lamp inside. We can all quickly get rid of this part in its entirety. And we will find that there are screw holes in the floor of the ceiling lamp, which are used when installing with our ceiling or bottom box.

The other part of the ceiling lamp is the lampshade of the ceiling lamp. Because ceiling lights, no matter what bulb is used, such as energy-saving bulbs or LED beads, are installed on the floor. Later, you need to cover these bulbs with a lampshade to show good results.

Therefore, the shade of the ceiling lamp is removable.

Once you have all the installation tools ready, first choose a good installation location, such as in the living room and kitchen, preferably in the middle, so that the light can shine more evenly and brightly. If you're in the bedroom, try not to be above the bed, as this will affect your sleep. At the same time, in order to avoid the consequences of falling from the installation, try to choose a place with high bearing capacity such as masonry.

Remove the ceiling lamp mask. In general, the mask can be fixed in two ways: rotating and breaking.

When removing the mask, the lamp can be removed at the same time. Pay attention to the process and be careful not to break the light.

Install the base and pre-pass the wire hole in the base at the reserved place. When screwing in, be careful not to tighten too tightly so that the position can be moved during future inspections. Once the base is secured, attach the power cord to the lamp holder.

At this time, cut off the power supply to avoid the risk of electric shock. At the same time, wrap the thread with a black belt in advance and keep it at a reasonable distance. Once all the wiring is complete and all the electricity is turned on normally, the mask and pendant can be installed.

What needs to be paid attention to when installing ceiling lamps must be turned off before installation, so as to avoid safety accidents such as electric shock during installation. The place where the luminaires are installed must be sturdy and durable, avoiding wooden and flammable places. Ensure the integrity and safety of the lamp.

When replacing the bulb, the holder housing must not be broken to prevent electric shock.

First of all, the position of the installation light should be cleaned, and then the top light can be glued to this position.

The installation is relatively simple, first of all, turn off the power, and then take out the ceiling lamp and put it in the position to be installed, you can also use a pencil to mark the position of the base, and then according to the installation hole, put the ceiling lamp on the ceiling to drill holes.

Install on the ceiling and make a few screws on the ceiling so that you can put the ceiling light on it.

You should ask the appropriate professionals to carry out the installation, the most important thing is that if you install it blindly, it is likely to have a certain impact on the roof, so avoid this situation.

If you have an electric hammer or electric drill, you can consider installing it yourself. To install a circular one, find the center point on the ceiling, and pay attention to the symmetry between the two walls for square lights. You must mark the hole with the lamp, lift the lamp, close to the ceiling, use a paintbrush through the screw hole of the ceiling lamp, mark the ceiling, and do not deviate from the mark when punching.

There are several holes in the ceiling lamp, just make a few holes in the ceiling, the lamp is lighter, use the expansion plug after punching, and the lamp is heavier, and use expansion bolts. After these works are done, they can be connected with a soft wire, and the ceiling cassette can be connected to the wiring of the lamp.

The use of ceiling lights is currently a lamp that many home decorations must be less, it is simple and generous, and does not lose the high-end atmosphere, so whether it is home decoration or some commercial room decoration, or even large hotels, you can choose sky lights. So, how can you install this light correctly? Decide where to install.

The first thing you should do when installing a ceiling light is to decide where to install it. In the general kitchen and living room, put the light on the **, which can make the light evenly distributed. Bedrooms need to be thought out holistically.

Usually, the ceiling lights are not set directly above. This can affect sleep. In addition, the installation of ceiling lights must take into account the construction of the wall.

After confirming whether the wall can withstand it, we will perform the following installations. Never use a wooden wall as a mounting wall. Because after a while, it will fall and become dangerous.

How can interiors save money without worrying? Carefully remove the sky lantern mask. Remove the outer cover.

In general, there are rotating and fixed clips fixed to the outer cover. When removing it, be careful not to damage the cover.

Remove the lamp by the way after removing the cover, and do not let the lamp break when installing. Install the base of the lamp correctly. Place the pedestal in the specified installation position, mark the wall with a pencil, then take out the pedestal, use an electric drill to make a hole in the marked position, and install the expansion bolt for the pedestal fixing in the hole.

Please note that the diameter of the hole and the depth of burial meet the bolt specifications. Then put the lamp back in the specified position and fix it.

Professionally connected wires. Connect with the exchange base of the ceiling lamp, note that the two wires connecting the ceiling lamp is off, if the electrical contact is good, then wrap them with black belts respectively, try to keep a certain distance, otherwise the two wires may not be the same metal plate short circuit, danger. Wear a mask and belt.

Once the wires are connected, try to power them on, and if it's normal, cut off the power and wear a mask with a ceiling light. The ceiling lamp in the living room also needs to install a series of pendants, because the pendants of various models of ceiling lamps are different, and the specific installation method can refer to the product manual. Although most of the pendants are left, they can be stored and replaced as needed if they are installed.

1. Ceiling lamp: Ceiling lamp has a round, square or rectangular base (chassis), and the size of the base varies. The base of the lamp can be fastened with expansion pipe bolts, or it can be fastened with wood screws on the embedded wooden bricks.

If the diameter of the base of the lampholder is more than 100 m², 2 screws must be used. If the lamp base is installed with embedded bolts and penetrating bolts, the bolt diameter shall not be less than 6 mm. Wooden screws can be used to fix the lamp on the base table, and the number of wood screws should not be less than the number of mounting holes given by the lamp.

It can be fixed by expansion bolts, or it can be fixed by selecting a good position for the decorator to fix the installation, or you can install the base in advance and then install the mask.

You can install the power supply first, then use the expansion screw to fix the base, and then install the mask, so that the installation sequence can ensure the installation effect.

Ceiling lamps are common lamps and lanterns in modern homes. It is affordable, simple and generous, so it is deeply loved by consumers. Some time ago, my friend's new house was renovated and asked me how to install the ceiling lamp.

In fact, the installation method of household ceiling lamps is very simple, so let's take a look at it together.

First, the installation steps of the ceiling lamp.

1.Open the package of the lamp and check that the lamp is in good condition. If there is no problem, remove the lamp and base.

2.Place the ceiling light on the ceiling and draw the location where it needs to be installed.

3.Depending on the location of the drawing, punch holes in the ceiling. After punching the holes, install the expansion screws.

4.Put the base in place and tighten the screws.

5.Cut off the main power supply in your home.

6.Connect the reserved wires to avoid power outages due to loose wires in the future.

7.Install the lamp tube and cover the lampshade to complete the installation.

2. Precautions for installation of ceiling lamps.

1.It is best not to install the ceiling light in the bedroom above the bed, so as not to affect the vision with mosquito nets.

2.Choose a location where the masonry structure can carry the weight of the ceiling lamp.

3.The cord connected to the power cord of the ceiling lamp should be wrapped with black tape to avoid leakage.

4.It is best to ask a professional master to install it to ensure personal safety.

<> The installation methods of home decoration ceiling lamps are: 1. Transition plate installation method; 2. Directly use the chassis installation method: 1. Put the chassis on the ceiling first, and draw the position of the mounting hole with a cone.

2. Then use a percussion drill to punch holes and put people into plastic expansion pipes. Insert an iron wire as a guide rod in one of the expansion tubes, and install a screw on the lamp chassis, remove the guide rod and put on another mounting screw, install the chandelier chassis on the ceiling, and lead the chandelier power cord out of the lead hole. 3. Connect the wire of the lamp head as required (the tongue in the middle of the screw lamp head is connected to the live wire), and finally install the chandelier.

1. Transition plate installation method.

1. First of all, use expansion bolts or plastic service pipes to fix the transition plate in the predetermined position of the roof.

2. After the chassis components are installed, the power cord is threaded through the lead hole.

3. Then hold the chassis to find the mounting bolts on the transition plate and put on the nuts.

4. When it is not easy to align the position because it is inconvenient to observe the zinc, an iron wire can be used to pass through the chassis mounting hole, and the top is at the end of the bolt, so that the chassis is gently approached, and the bolt is smoothly aligned along the iron wire and installed in place.

Second, directly use the chassis installation method.

1. Put the chassis on the roof first, and draw the location of the mounting hole with a cone.

2. Then use a percussion drill to punch holes and put people into plastic expansion pipes. Insert an iron wire as a guide rod in one of the expansion tubes, and install a screw on the lamp chassis, remove the guide rod and put on another mounting screw, install the chandelier chassis on the ceiling, and lead the chandelier power cord out of the lead hole.

3. Connect the wire of the lamp head as required (the tongue in the middle of the screw lamp head is connected to the live wire), and finally install the chandelier.

1. Precautions for installation of ceiling lamps.

1. Before installation, check whether the appearance of the ceiling lamp is intact, whether the cross-sectional size of the wire core is appropriate, and whether the wire and joint are fixed to avoid poor contact.

2. When installing ceiling lamps in masonry structures, embedded bolts should be used, or fixed with expansion bolts, nylon plugs or plastic plugs, and wooden wedges should not be used; And the bearing capacity of the above-mentioned fixings should match the weight of the ceiling lamp to ensure that the ceiling lamp is fixed firmly and reliably, and its service life is prolonged.

3. The number of bolts fixing the lamp holder should not be less than the number of fixing holes on the base of the lamp, and the diameter of the bolts should match the hole diameter; For lamps and lanterns without fixed mounting holes on the base (punch holes by themselves during installation), each lamp should have no less than 2 bolts or screws for fixing, and the center of gravity of the lamp should coincide with the center of gravity of the bolts or screws; Only when the diameter of the insulating table is 75mm or less can it be fixed with 1 bolt or screw.

4. The ceiling lamp can not be directly installed on the combustible object, in order to be beautiful, it is actually very dangerous to line the back of the ceiling lamp with the painted three plywood, and heat insulation measures must be taken; If the high temperature part of the surface of the lamp is close to combustibles, heat insulation or heat dissipation measures should also be taken.

5. If the ceiling lamp is used in the screw lamp, the following two points should be paid attention to in its wiring: The phase wire should be connected to the terminal of the center contact, and the neutral wire should be connected to the terminal of the thread; The insulated housing of the lamp head should not be damaged or leakage to prevent electric shock when replacing the bulb.

6. Ceiling lamps equipped with incandescent bulbs, the bulbs should not be close to the lampshade; The power of the bulb should also be selected according to the technical requirements of the product, not too much, so as to avoid the temperature of the bulb being too high, and the glass cover will splash down and hurt people after it is broken.

7. The electrical contact between the two wires connected with the power supply of the ceiling lamp should be good, and they should be wrapped in black tape respectively, and keep a certain distance.

Second, the installation steps of the ceiling lamp.

1. Unpack the ceiling lamp and remove the thread on the base;

2. Take out the lamp to prevent it from falling accidentally during the installation process (ceiling lamps generally come with their own light source);

3. After the lamp tube is removed, place the base of the ceiling lamp on the ceiling and draw the position of the lamp hole;

4. After marking the position of the hole, drill the hole in the ceiling, and the actual size of the hole needs to be determined with reference to the size of the lamp hole on the ceiling lamp;

5. After drilling the hole, drive into the colloid to fix the screws;

6. Attach the base, turn it at an angle, and tighten the screws.

7. Disconnect the indoor power supply, wiring the wire, and then install the lamp back.

8. Carefully check whether the installation and line connection of the lamps and lanterns are correct and standardized, and whether the wiring is firm;

9. Test whether the lamp can be energized normally, confirm the operation status of the lamp, 10. Cover the lampshade and complete it.