What should I do if the speaker Bluetooth can t be connected? What s going on if the speaker can t c

The solution to the Bluetooth connection of the speaker is as follows:Step 1: We need to turn on the Bluetooth speaker first。 Press the power button to turn on,Then the speaker's Bluetooth indicator flashes,Bluetooth is turned on,It has entered searchable mode。

If you want to disconnect, you can turn off Bluetooth, or you can tap the exclamation mark next to Connected, and then select Disconnect to disconnect the speaker from your phone.

Common problems of Bluetooth cannot be connected: 1. When the Bluetooth device cannot be connected, you can consider whether other devices have preempted the Bluetooth channel, or whether the Bluetooth speaker has not entered the matching state.

2. Because the response of the Bluetooth module is very slow after some Bluetooth speakers are turned on, they may not be able to start in time.

3. If the distance is too far, it is likely that the signal cannot be received. There is also a failure of hardware facilities, whether it is a problem with the Bluetooth module of the speaker or a problem with the Bluetooth function of the mobile phone, it cannot be successfully connected.

4、Take a look at the knob on the right side of the speaker There are four gears,Namely:switch、Bluetooth、aux、FM FM,Each button can be tried to operate。

The Bluetooth speaker can't be connected, there are many reasons:

1. The Bluetooth speaker has not entered the matching state, it is recommended to press and hold the Bluetooth speaker switch for about 5 seconds, and then try to connect when the Bluetooth indicator is flashing;

2. If the Bluetooth mode in the mobile phone is not turned on the "open detection" function, enter the Bluetooth of the mobile phone, turn on this function, and try again;

3. The distance between the Bluetooth speaker and the device to be connected is too far, and it is recommended to connect within 10m.

So what is the correct way to connect a Bluetooth speaker? How does it work?

The Bluetooth speaker is connected to the computer.

First of all, check whether the computer has Bluetooth function, and if so, turn it on;

Then connect the Bluetooth speaker to the power supply, and press and hold the switch for about 5 seconds or more, and wait for the Bluetooth indicator to flash;

Then click on the Bluetooth function of the computer, find the name of the Bluetooth speaker, and click to connect.

The Bluetooth speaker is connected to the mobile phone.

First of all, plug in the Bluetooth speaker;

Then connect the Bluetooth speaker to the power supply, and press and hold the switch for about 5 seconds or more, and wait for the Bluetooth indicator to flash;

Then turn on the Bluetooth of the mobile phone, find the Bluetooth speaker name in the Bluetooth, and click to pair and connect;

Until you hear the Bluetooth speaker make a "beep" sound, it means that the connection is successful.

The reason why the Bluetooth speaker cannot be connected may be that the Bluetooth speaker is not turned on, or it may be that the Bluetooth speaker is not on the phone, or it is caused by the failure of the Bluetooth speaker, as follows:

1. The Bluetooth speaker cannot be connected if it is not turned on, you need to turn on the Bluetooth speaker and the Bluetooth function of the device, and then click to pair, and you can use it after successful pairing.

2. The Bluetooth speaker cannot be connected if the power is insufficient, and it can be solved by charging the Bluetooth speaker in time.

3. The failure of the Bluetooth speaker will also lead to the inability to connect, it is recommended to go to the local professional maintenance center for testing and maintenance, and do not deal with it yourself.

The connection method of the Bluetooth speaker is relatively simple, as follows:

1. First turn on the switch of the Bluetooth speaker and the Bluetooth function of the mobile phone and other devices;

3. When the Bluetooth speaker prompts that the connection is successful, the pairing is successful, and the Bluetooth has a recognition function, and there is no need to pair it again when it is used next time, and it will be automatically connected after opening.

What should I do if the Bluetooth can't connect to the speakerHello dear, the Bluetooth speaker can't be connected, you can restart Bluetooth or restart the Bluetooth speaker, and connect again; You can also restore the factory settings of the Bluetooth speaker before connecting; If Bluetooth is paired but it can't be connected, it is recommended to ignore the device first. What should I do if the Bluetooth speaker can't be connected1、Restart the connected phone, turn off the Bluetooth switch, restart the Bluetooth Grip Suntooth,The Bluetooth speaker re-enters the Bluetooth pairing mode,Then Bluetooth scanning and connection; 2. Restore the factory to restore the leaky Bluetooth speaker to factory settings, and then connect it after entering the Bluetooth pairing mode; 3. Ignore the deviceIf the segment chain is a speaker that has been paired with Bluetooth, and the mobile phone cannot be connected to the Bluetooth of the speaker, it is recommended to ignore the Bluetooth speaker device on the mobile phone first, and then reconnect. I hope I can help you!

If my answer is helpful to you, please give a thumbs up (comment in the lower left corner), look forward to your like, your efforts are very important to me, your support is also the motivation for my progress, and finally I wish you good health and a happy mood!

Summary. Dear, I'm glad to answer for you, there are the following reasons why the Bluetooth speaker can't be connected:1

If your device doesn't have Bluetooth turned on, make sure your device has Bluetooth turned on. 2.The distance is too far, the effective distance of Bluetooth connection is generally about 10 meters, if the distance is too far, the connection cannot be reached.

The device has been connected to other Bluetooth devices, if your device has been connected to other Bluetooth devices, it will affect the connection of new devices, please disconnect other Bluetooth devices before trying. 5.If your device or speaker is out of power, make sure that your device and speaker have enough power, as a low battery may cause an unstable or unconnected connection.

6.The Bluetooth version is not compatible, if your device and speaker are not compatible with the Bluetooth version, it will cause you to be unable to connect. <>

<> what is the reason why the Bluetooth speaker cannot be connected?

Dear, I'm glad to answer for you, there are the following reasons why the Bluetooth speaker can't be connected:1If your device doesn't have Bluetooth turned on, make sure your device has Bluetooth turned on.

2.If the distance is too far, the effective distance of the Bluetooth connection is generally about 10 meters, and if the distance is too far, the connection cannot be reached. 3.

The speaker does not turn on the pairing mode, please follow the speaker's manual to turn on the pairing mode, and wait for the device to search. 4.The device has been connected to other Bluetooth devices, if your device has been connected to other Bluetooth devices, it will affect the connection of new devices, please disconnect the connection of other Bluetooth devices before trying.

5.If your device or speaker is out of power, make sure that your device and speaker have enough power, as a low battery may cause an unstable or unconnected connection. 6.

The Bluetooth version is not compatible, if your device and speaker are not compatible with the Bluetooth version, it will cause you to be unable to connect. <>

<> kiss, expand for you, to destroy the plum is some ways to solve the problem that the Bluetooth speaker can't connect:1.Restart your device and speaker, try turning your device and speaker off and restarting, then try connecting again.

Delete the pairing record and re-pair, delete the pairing record with the speaker in your device, and then re-pair. 4.If your device or speaker needs to update a Bluetooth driver or firmware, follow the instructions to update it.

5.If the distance is too far away and the connection fails, please bring your device close to the speaker until the connection is successful. 6.

Confirm that there is no interference from other devices, make sure that there are no other devices or radio waves around your device, which can interfere with the Bluetooth signal. 7.Try connecting with a different device, and if your device can't connect to your speaker, try connecting with a different device to determine if the problem is with your device.