When the new house is decorated, you need to shovel the wall skin, so what depth should you shovel t

Shovel wall skin (shovel top) step.

1. Shovel top (shovel wall skin) is the first process of construction, shovel before rinsing the original developer to make the inferior white top (wall skin), flush a few times and then shovel it is much easier, shovel top with a special shovel knife, blades can be replaced at any time, shovel out of the garbage that falls on the ground must be cleaned up, so as not to paste the mortar auxiliary materials and the ground can not be tightly combined in the future, resulting in floor tiles.

Empty drums! <>

2. The work of shoveling the wall skin must be carried out after the construction of the site and the work of dismantling the wall is completed! Ceiling before hydropower slotting construction.

The original developer who scraped the wall unsatisfactory must be completely eradicated and cleaned up. <>

Do you need to shovel the wall skin for the renovation of a new house?

If it is a white wall, the wall skin should be shoveled, and the gray wall is not needed. "Shoveling the wall skin" refers to the removal of the original decorative layer of the wall to lay the foundation for the current wall decoration project. Including wall painting, wall tiling and other basic treatment, it is a concealed project.

One of the categories is the following reasons for eradication: There is engineering putty in the original house.

It is recommended to shovel off, those materials are very timely, and your decoration materials are not well bonded and will fall off the wall skin, I am a professional designer of home decoration and also supervise, listen to my accuracy. You'll regret saving that little money. First of all, it is necessary to see whether the wall is flat, whether there is a sand hole bulge, whether there is local discoloration, whether the wall is particularly thin, if it is sure that there is not, just brush another layer of paint, or change the color of the wall.

If the developer only approved a layer of old powder (talcum powder, painted with a topcoat) on the wall, many places have not been smoothed, and sooner or later they will crack and fall off, so it is absolutely necessary to shovel and re-scrape the porcelain: scraping porcelain is strictly a kind of mortar, sometimes plastered on the inner wall, the surface is flat, and it seems that the appearance is good. However, the water resistance and alkali resistance are not good, it is easy to pulverize, and the durability is also poor.

Do you want to shovel the wall skin for the decoration of the new house.

90% of new house decoration needs to remove the original wall skin, but it can be inspected before decoration. During the inspection, wipe the wall with a wet rag to see if there is any powder, or pour some water on the wall to test the firmness (if it is a painted wall, you must first scrape off part of the wall paint and then splash water), and then rub it on the wall with your hands or a wet rag to see if your hands will be stained with white ash. If the wall is relatively strong, it can be removed without removing it after checking that the wall is free of hollowing and cracking.

Do the math how much it will cost you to renovate your home

Under normal circumstances, the original wall needs to be shoveled to the bottom layer, so that the base treatment can be carried out to ensure that the adhesion of the wall should be enhanced during the later construction. If the wall skin is brushed directly without shoveling clean during the wall decoration construction, a large area may fall off in the later stage. Moreover, if you directly lay tiles and paste wallpaper, it is easy to leave a big hidden danger, so the wall skin must be shoveled clean.

When decorating the walls of a new house, there are some details that need to be considered.

1. Finished product protection. Generally, before the wall treatment of new house decoration, carpentry and tile paving have been completed. In order to prevent the finished product from being polluted by wall skin, dust and paint during the wall treatment process of new house decoration, the existing finished product in the room should be carefully protected.

2. Pay attention to the preservation of paint. Summer paint should be stored in a cool and ventilated place, and the storage container must be well sealed. Also take care to stay away from open flames and electrical outlets to avoid sparks triggering the paint.

3. Scrape putty more than 2 times before wall painting, and the normal drying time during the period is 1-2 days. When scraping putty, wipe the moisture on the wall with a dry cloth to keep the wall dry, which is conducive to the painting of the wall.

4. If the wall is not easy to dry due to high humidity and high temperature, you may wish to use a dehumidifier to treat it in order to speed up the drying speed. During construction, it is necessary to ensure that the wall is completely dry, or use professional instruments to measure the moisture content, and then carry out construction after it is qualified.

Enter the area and get the decoration for free**].

Enter the area and get the decoration for free**].

Shoveling the wall skin is to make the foundation for wall decoration in the future, and the thickness of the wall made by each developer is different, according to the actual situation. If the wall is painted with putty, first shovel all the white putty until the original bottom layer is visible, and then repair the cracks and level. If you don't have a whitewashed wall, just sweep the sand and muddy water off the wall.

If it is a putty that has been painted, all the original white putty should be shoveled, shoveled to the original bottom layer, and then check whether there are cracks or unevenness, if it is an unpainted wall, it is necessary to sweep down the sand and gravel on the surface of the cement surface, and then see if there are cracks or other unevenness.

The meaning of shoveling wall skin is to deal with the uneven places on the wall, so just shovel the loose wall skin on the wall and grind some uneven places.

This needs to be analyzed on a case-by-case basis, and in this case, only the oxidized part of the surface needs to be removed.

Nowadays, when decorating a home, many decoration masters who are carrying out construction will suggest that the wall skin be shoveled, if the wall skin is not shoveled, then the latex paint is easy to cause cracking. However, many owners will also have some complaints that since they want to be removed, why should the developer give a white approval, and whether the white wall skin should be removed. So let's take a look at whether to shovel the wall skin for the decoration of the new house, and the method of shoveling the wall skin of the new house!

Do I need to shovel the wall before the renovation of the new house?

1. The key to shoveling the wall skin is also to look at the quality of the wall itself, if the quality of the wall itself is very good, then it is okay not to shovel; If the quality of the wall itself is not very good, it is proposed to shovel the wall to lay the foundation for the interior decoration at the back.

2. See if the wall is water-resistant putty powder, if it is water-resistant putty, you don't need to remove the original wall putty powder, if it is non-water-resistant putty powder, you need to remove it. For how to judge whether it is water-resistant putty powder, you can use the broom to sweep the wall, and the significant powder loss is whether it is non-water-resistant putty powder, or pour it on the wall immediately with pure water, and the water does not drip down quickly into the putty powder, which is also non-water-resistant putty powder, and it is also like the wall after sprinkling water, rubbing the wall with your hands is significantly loose and needs to be removed.

3. If the wall putty powder falls down, the wall is hollow and other problems, it indicates that there is something wrong with the construction of the project, and the wall should be shoveled off and revised. If there is a crack in the wall, it is likely that the wall structure is a problem, and the wall must be shoveled out to find out the cause and complete the repair.

What is the way to shovel the wall in a new house?

1. First of all, you should prepare tools, paint roller bearings, iron buckets, etc., and then distinguish whether the putty powder is water-resistant putty powder, you can simply splash a little water on the wall, wait for 2 minutes and then scrape it with special tools such as scrapers, if the wall layer by layer is very easy to peel off, it is not water-resistant putty powder, and the wall needs to be shoveled.

2. The following is the application of the interior decoration special type of wall-coated roller bearing, soak it in water for a short time, remove the small total area area that must be shoveled to soak the wall, and then quickly use a tool to shovel off the soaked wall, pay attention to a piece of continuous knife, roof and high-altitude wall with a herringbone ladder and extend the shovel collet, and so on all shovels, first brush a layer of wall solid, and then batch putty again.

Whether to shovel the wall skin for the decoration of the new house mainly depends on whether the original wall is water-resistant putty. If the international environmental standards have been met, there is no need to remove the wall skin, and if it is not in accordance with the regulations, then it must be removed. Attention needs to be paid to the material in this area.

I think it is necessary to remove the wall skin, so that it will be more convenient to decorate in the later stage, and it will not cause more losses; When shoveling the wall skin, you can choose the electric wall shovel machine, his quality is very high, and the use performance is very good, very convenient, the public use is also carefully processed, can be very good to shovel off the wall skin.

The decoration of a new house requires shoveling the wall skin; You can choose an electric shovel and put it on the wall to polish it yourself, which is very convenient and flexible to operate.

In the process of home decoration, we must pay attention to the intensity of construction when reshoveling the wall skin. Don't shovel sharply, so that the later decoration will be more troublesome.

It will be better to renovate the wall skin until the wall skin is blackened, and the standard for redecoration wall skin is that you can see the original color of the wall skin.

When redecorating, the shovel wall skin must be shoveled a little harder, and the previous cement wall surface is exposed, so as to make the desired effect.