-
1. Frontal filling surgery is suitable for congenital small forehead, forehead depression is groove-like, pit-like"u"Shape, the forehead is tilted backward and uneven.
2. Frontal augmentation surgery is suitable for narrow, concave and asymmetrical temporal parts.
3. Frontal filler surgery is suitable for low and flat eyebrow arch or glabellar (Yintang acupoint).
Materials for frontal filler surgery.
Forehead augmentation can be improved by forehead augmentation (narrow forehead in front view, forehead contour line too backward in side view), local depression in the forehead due to various reasons, and asymmetry on both sides. Frontal filler surgery materials are soft and hard. The former is generally used for limited soft tissue depression, and materials such as autologous fat, artificial collagen, etc. can be used to achieve better frontal augmentation results.
The latter is mainly used for bony defects and is most commonly used to change the shape of the frontal region, including autologous bone and synthetic materials (i.e., tissue substitutes). So what is the effect of forehead filling?
According to experts, frontal filling can effectively improve the local depression caused by various reasons, asymmetry on both sides and other symptoms are improved, usually it can be effectively used expanded PTFE, expanded polyethylene, medical solid silica gel, etc. to effectively correct and improve the symptoms of bone defects, and it is necessary to go to a regular hospital for examination and ** when performing surgery, so as to achieve the expected effect of frontal filling.
Therefore, in general, the effect of frontal filling is very significant and worthy of everyone's trust, but everyone should also go to a regular hospital to do it, and pay attention to good care after surgery, so as to ensure the best frontal filling effect.
-
Shengjiaxin Qiu Lidong said that autologous fat filling on the forehead is mainly a method to extract a certain amount of fat from other parts of the body as a material to fill the forehead, and then purify and screen the fat and inject it into the forehead depression to achieve a method of repairing the depression.
-
Hello, each hospital has a unique system, the positioning of the operation must be different, and the hospital environment and medical equipment are not the same, so it will affect the ** of autologous fat forehead augmentation. The size of each beauty seeker's forehead is different, so the dosage of feed filling must also be different, so that the ** of autologous fat enlargement of the forehead will also increase.
-
I have done a project with Zhang Hongfang, and I have to admire Zhang Hongfang's technique, which is really first-class, and she still has ** there.
-
Every beauty lover pays more attention to their facial aesthetics and does not want any blemishes, so there are some beauty lovers with flat foreheads who choose to have forehead filler surgery. There are many materials for forehead filling, such as silicone, bulk, autologous fat and hyaluronic acid.
Forehead augmentation is achieved by making a small incision in the area and placing the sculpted implant on the forehead. There are many materials used for forehead filling, such as solid silicone, expanded PTFE, expanded polyethylene, autologous fat, hyaluronic acid and collagen.
Preoperative Precautions:
1. Before performing this surgery, it is necessary to make sure that you are in good health and have no lesions of important organs, such as heart disease, nephritis, pneumonia and other diseases. In addition, laboratory tests such as blood routine and urine routine should be done before surgery.
2. If the operation is performed by women, the menstrual period should be avoided, because the body of women during the menstrual period is relatively weak, and if the surgery is reluctant, it is easy to lead to adverse risks.
3. Smoking should be prohibited before surgery, and if you are taking anti-inflammatory drugs or contraceptives and other anticoagulant drugs, you should also stop using them within two weeks before surgery to avoid increased bleeding.
The above is an introduction to some knowledge related to forehead filling surgery, because the advantages of different filling materials are also different, so we should try to consult with a professional doctor before carrying out this surgery, and the professional doctor can recommend suitable filling materials according to a person's forehead condition and personal wishes, and inform the beauty lovers of some preparations that should be done before the operation, as well as the surgical effect and their own safety are guaranteed to a certain extent.
-
There are many materials to fill the forehead, first of all, solid silicone bulk, PTFE, expanded polyethylene and other useful and effective treatments. The key is to see what you choose.
-
Medically filled prostheses are generally silica gel, but chemical materials are easy to cause rejection in the human body, so it is best to use biological materials, such as pig's head meat.
-
Hello, At present, the forehead filling with autologous fat is relatively good, the postoperative effect is natural, and the maintenance time is relatively long. It is recommended to go to a regular plastic surgery clinic for filling.
-
It's better, whether it's experts or technology, it's incomparable to other hospitals.
-
There is more experience here, and the specific ** according to the degree and the choice of materials, let's have a face-to-face consultation first.
-
It is generally better to choose a well-known cosmetic plastic surgery hospital for forehead filling, because the medical technology of a well-known cosmetic plastic surgery hospital is more advanced and the equipment is relatively complete, so it can ensure the safety of the process and improve the effect after the treatment. It is better to choose a professional and regular large-scale plastic surgery hospital, because the professionalism of the hospital, the technical level of the doctor and the impact of the operation experience on the effect are more important, so it is better to choose a regular hospital.
-
Implant filling, autologous fat grafting, and dermal fillers can also be used. Which one to choose, you can negotiate with Korea Plastic Surgery Hospital in South Korea, Koreaw, I hope it can help you.
-
: Hello, frontal augmentation can effectively improve the symptoms of congenital small forehead, forehead depression and groove-like shape. At the same time, frontal fillers can also be done for patients with uneven tilt or flattening of the frontal part caused by narrow, sunken, asymmetrical sides and lack of soft tissues after frontal plasty.
There are many materials used in frontal filling, when the frontal bone is defective, the available materials are mainly solid silicone, expanded PTFE, and expanded polyethylene and so on for effective **. In addition, commonly used materials include autologous fat, fascial tissue, artificial collagen, etc., so that the desired effect can be obtained.
-
Hello, as far as the people who have done autologous fat filling forehead filling, most of the beauty seekers say that it has a very good filling effect, because it is by extracting a certain amount of fat from the position of their body fat to fill the forehead, so it will not produce rejection reaction, and the damage to the body is not very great.
-
Hello, it is recommended to go to a regular professional medical plastic surgery hospital to choose a suitable way to operate, and professional doctors will give suitable advice.
-
If the interval between autologous fat fillers has long passed, then it can be saved according to the area where the massage is higher and the filling position is not moved, so that the key practice is to allow the fat to be digested and absorbed faster, so as to exceed the goal of regulating the excessive autologous fat filling. It is digested and absorbed for the first four months after the autologous fat filling, so the overfilling can be saved within four months according to the position of the massage that is higher than the autologous fat filling. There are many places that can be filled by autologous fat grafting, and the specific method of rescuing the massage points with too much autologous fat filling must be asked by the doctor.
Autologous fat filling, excessive liposuction rescue.
If you want to solve the situation of excessive autologous fat filling as soon as possible, then liposuction or laser lipolysis is more reasonable and fast, or find Yimei Wang Dong to repair, and this kind of method can be applied anytime after autologous fat filling, which is a rescue plan plan that is more economical in this time.
-
There will be a certain degree of swelling, bruising, and pigmentation for a period of time after the autologous fat filler, and most of them will gradually subside in about 1-2 weeks. It takes about 3 months to fully return to a stable state, and the effect is initially stable 3 months after surgery.
-
If you don't want that valve, it seems like the hospital can take it out too, but he must be a little full at the beginning, and after a while he absorbs it, it is not so full.
-
What should I do if my forehead is too full with fat filling? Facial fat filler extracts some fat from areas with a lot of fat accumulation, such as the abdomen and inner thighs, and then separates the fat from the center of the circle with a centrifuge to extract the pure fat, and then injects it into the desired part of the face. The anesthesia is based on sleep anesthesia, so there is no pain during the whole procedure.
After the first facial lipofilling surgery, 2 to 3 transplants can be repeated depending on the fat absorption, and the transplanted fat cells will not be absorbed and survive forever after a sufficient amount of fat is injected.
Is it good to have autologous fat cells that fill the forehead?Fat is extracted from areas with a lot of fat accumulation, such as the abdomen and inner thighs, and then the fat is separated by a centrifuge to extract the pure fat, and then injected into the desired part of the face. The anesthesia is based on sleep anesthesia, so there is no pain during the whole procedure. >>>More
The face is the most obvious part of the whole person, and we have to rely on the face to contact and greet people every day, so the beauty of the face is also very important, so some beauty lovers will use some facial fillers to make themselves more beautiful. So in this process, there is actually a certain risk, so let's talk about how facial fillers are. >>>More
1. The general artificial turf only undergoes one weaving process, while the circle cut velvet artificial turf has gone through two weaving processes. First, the weaving of the loop pile is carried out by a tufting machine specializing in the production of loop pile, and then the weaving process of cutting pile is the unique production process of loop cut pile artificial turf. >>>More
What to do if your hairline is too low?
If the hairline is too low, the main reason is that the face is relatively short and the proportions are not harmonious. If the hairline is too low, hairline adjustment is required, and the best technique for hairline adjustment is the scarless transplantation technology, which is a revolutionary hair transplant technology in the world, which does not need to transplant the flap from the donor area, so it can avoid scarring in the donor area and further shorten the recovery time. The scarless transplant technique is a state-of-the-art method of obtaining hair follicles from the donor area of a hair loss patient with microscopic instruments, and it is also the least invasive hair transplant procedure to the hair follicles. >>>More
1.Dissolve vinegar and salt in water, the ratio is approximately water: white vinegar: >>>More