In the process of home decoration and wall treatment, is it necessary to paint the wall? Why?

In the process of home decoration and wall treatment, is it necessary to paint the wall? Why? If the wall of the home has already reached the necessity of the benchmark interior decoration, such as the surface of the wall feels hard and firm, there is no loose structure, no sand and dust, this situation does not need to brush the wall, and you can immediately batch putty.

However, when the structure of the epoxy cement surface is loose, the powder and sand are more serious, especially the renovation of the wall of the old house, it is necessary to brush the wall solid.

If there is no sand on the road surface at home, and the floor has already been leveled, there is no need to brush the ground. If the sand on the cement floor is more serious, it is recommended to brush the ground. What is the function of wall solidification; Improve wall adhesion; If the adhesion of the base layer of the wall is weak, there will be sanding, and it is very easy to drop the ash when you touch it.

The wall that has been brushed has a strong adhesion, and the construction of the wall behind it is more convenient and fast. Prevent the wall from hollowing and cracking; After the bottom layer is brushed with the wall, the batch of putty will be more leveled, and there is no need to worry about the occurrence of grit or potholes and particles, and the cracks and cracks on the wall will occur in the middle and later stages, which is not easy to endanger the beauty of the wall.

inhibition of anti-alkali; Many walls will have anti-alkali conditions, and the wall has a good closed type, which can play a practical effect of inhibiting anti-alkali. It can prevent dust from forming in the crevices of the floor in the middle and later stages. In the middle and later stages, when the solid wood floor is laid, the quality of the project construction will be improved.

Moisture-resistant and waterproof; The floor has the practical effect of moisture resistance and waterproofing, which prevents the wooden floor from being corroded by moisture, increases the service life of the wooden floor, and can promote the gap between the wooden floor to be cleaner.

What are the shortcomings of wall painting? For wall solidification, it is actually a kind of material for traditional wall drying, and it can also be said to be a kind of upgrading commodity for traditional waterproof putty. The key ingredients of wall reinforcement are polymer moisturizing emulsion, generated super glue, additives, etc.

In the case of use, it is coordinated with water according to a certain ratio, and after mixing, it should be brushed on the wall with a roller brush. After brushing, a layer of coating can be generated on the wall, which has very good compressive strength and has a certain closing effect on the wall. However, despite the effects of wall solidification, there must be the following problems after painting.

This may cause the release of contaminants in the room beyond the standard. Like many of our home decorations, we are worried about the problem of pollutants in the room, so we want to choose some more environmentally friendly products. However, if some unnecessary raw materials are used too much in our home, it will cause the release of pollutants beyond the standard.

In particular, some commodities that do not meet the specifications released are selected, and the polluting substances exceed the standards are more serious, and the wall solid is a more commonly used raw material. Because the manufacturing process of wall solids is very simple, there are many wall solids in the sales market, and even some of them are all equipped with their own solid materials, so in this case, there is no way to ensure its environmental protection characteristics. Therefore, there is a problem of environmental pollution exceeding the standard after all the wall painting on the wall.

I think in the process of home decoration, then it is also necessary to paint the wall, because this can increase the service life of our wall.

It is very necessary to brush this wall solid, so that the wall can be more stable, and there will be no peeling off.

Painting the wall during decoration can play a role in moisture-proof to a certain extent and avoid mildew.

These things are directly handed over to a professional decoration company to deal with, saving worry and money, [enter the area of the house, and calculate the house decoration with one click**].

If I renovate my new house, I will definitely paint a layer of wall solidification, because the house will be lived in for many years, and it must be repaired more perfectly. Plus it doesn't cost much to paint a layer of wall solids, so why not brush it? But if it is an old house renovation, I will not paint the walls, because there is no need, the cost of renovating it is too great, it is all a cost.

So do you want to brush the wall? It still depends on how old and new the house is!

Two. Wall solid is a material that protects walls.

Maybe many people don't even know what wall fixing is! When someone else is decorating, if you look at it, you will see that there is a red or green layer on the wall, something like paint. This is the wall solid.

Because the wall is solid like paint and like gel, many people don't understand, but in fact, it is a kind of infiltrating material, which can better protect the wall we decorate. The wall is the cornerstone of the house, and now the decoration and wall painting have become a basic operation.

Three. Wall solidification can protect the wall from cracks.

The protection of the wall is mainly to prevent the lime from falling off, and in addition, it can also protect the wall from cracking. Don't think that the quality of the new house is very good, there are too many low-quality real estate now, and the new houses in some communities, even if you live in a few months, the wall will crack and peel, and you can't say that brushing the wall will definitely solve this problem, at least it can play a role in protecting the wall to a certain extent. Of course, when it comes to renovation, it's up to the individual whether to paint the walls or not!

Is it necessary to paint the wall for the decoration of the new house?

New home decoration, for many people is "pain and happiness", you can see their home a little bit perfect, a little bit of enrichment, the joy and excitement in the heart is beyond words, the pain is all kinds of decoration matters to worry about, for fear of accidentally falling into the "pit". Sometimes there are some details that have not been dealt with well, such as the problem of hollowing off the wall soon after the new house is occupied, but I don't know that there is a problem? Next, let's analyze, why does this problem occur?

Why does the wall skin fall off?

There are many reasons why the wall skin hollow drum falls off, but the quality of the wall is inextricably linked with the "wall solid" of the home decoration material. It is very likely that the peeling of the wall skin is caused by the lack of "wall solidification" during decoration.

What is Wall Solid?

Wall solid, is the interface agent used to strengthen the wall, we often say "yellow wall, green green blue waterproof" in the "yellow wall" refers to it. Because of its strong penetration, it can significantly improve the strength of the base layer, fix the loose and floating dust of the base layer, and improve the adhesion of subsequent waterproof coating and tile paving construction.

Is it OK not to use wall mounting?

The rough wall of the new house often has the phenomenon of falling sand and loose wall, the adhesion of the wall is very low, which will affect the subsequent construction, and the adhesion of the wall can be effectively improved after the wall is painted. In layman's terms, the putty is scraped after the wall is brushed, and the putty is more firmly glued, and the putty is not easy to fall off and hollow.

What is the scope of application of wall reinforcement?

Wall solidification can be used for interface reinforcement treatment of loose lime sand base, and can also be used as an additive for brushing treatment of cement-based surface.

Therefore, wall solid painting is an indispensable process in decoration, and its role is irreplaceable, to prevent the wall from hollowing and delamination, is conducive to improving the adhesive force of ceramic tiles, and also makes the wall decoration effect better.

Decoration Da Cui explained the wall solid on the spot, hoping to help you in decoration.

If conditions permit, you can brush it, because brushing the wall can improve the adhesion of the base layer, make the base solid, and also prevent the wall from hollowing and cracking to a certain extent.

The effect of strengthening is actually not big, I don't think there is any need to brush the wall, considering the cost, it is recommended not to kill the country.

I didn't say that I had to brush, but if I brushed, it could play a certain role:1The cement base surface looks hard and flat, but after touching and rubbing with hard objects, it will cause flying sand dust and deep and shallow scratches.

2.The dust of the flying sand is serious, and it can be easily rubbed off by hand. This situation is mostly due to the fact that the proportion of cement is too small, and the loose layer must be completely eradicated, re-plastered and brushed with the wall and ground solid, which plays the role of fixing the wall and sealing the bottom.

3.The solid and smooth cement base surface is abnormal, and the putty layer is difficult to adhere, which increases the difficulty of subsequent construction and has certain construction safety hazards. In this case, a layer of wall and ground solidification can be brushed, because wall and ground solidification belong to a kind of interface agent, which can play the role of connecting the upper and lower levels, consolidating the base layer and allowing other substances to cover the surface.

Generally speaking, only the wall is sanded or stuccoed with a layer of crispy surface, and the wall is solid, otherwise, the putty on the wall of the crispy surface will have the hidden danger of falling off.

Home decoration is not the need to paint the wall, the new house is mainly to see whether the wall stucco layer mortar is up to standard, generally speaking, scrape the wall with nails without sanding, there is no need to paint the wall.

In addition, if the wall of the old house does not have long-term leakage to make the wall chalk, there will be no crispy surface, and there is no need to paint the wall.

Therefore, only if there is sanding and puff pastry in the wall painting layer, it is necessary to paint the wall solid.

This depends on the basic treatment of your house (generally a rough house), some developers (builders) have already done wall fixing for you, although some have not done it, but the mortar ratio is appropriate, the wall itself is very strong, the most important is the kind of foolishness, you must do your own wall solidification.

You can choose to brush the wall solid. The state of painting the wall is to make the latex paint of the wall more suitable for the wall. So you can see for yourself if you need it.

In the decoration of new houses, in order to avoid the white ash of the walls from falling off, it is still necessary to make the wall solid.

Must be brushed and there will be no problems later.

Let me tell you whether you need to paint the wall and the ground when decorating, and what are the benefits.

If there is such a condition, or the budget for decoration is sufficient, then the wall and ground can be painted;

Wall solid ground solidification is: 801 glue, interface agent substitute, is a green, environmentally friendly, high-performance interface treatment material, with excellent permeability, can fully infiltrate the surface of the substrate, make the base dense, improve the adhesion of smooth interface; Qualified and regular wall solid solid non-toxic, tasteless, is a green environmental protection product.

I'm sure a lot of people don't know much about wall and foundation reinforcement. In fact, wall fixing and ground fixing are important auxiliary materials in decoration construction, and their role is irreplaceable. Wall fixing agent is an environmentally friendly product, which is a water-based interface treatment agent refined from water-soluble resin and multifunctional additives.

Strong permeability, can fully penetrate and penetrate the wall base. There are two types in the market, clear and yellow, and most of them are yellow. When the blank or old walls of many new houses were repaired, it was found that the surface of the walls was relatively loose and the sand grains were heavily powdered.

If the putty is used directly or brushed, it is easy to mix the putty with the cement mortar.

layer bonding, resulting in a hollow surface.

Shelling, construction hidden dangers are greater. The wall is fixed with good permeability. Painting on the cement mortar layer or wall base layer can effectively improve the bond strength of the mortar or putty with the wall.

When the mortar layer is hard, the putty will have better adhesion to prevent hollowing and delamination. If the air humidity in the home.

Relatively high, the cement walls will slowly regain moisture, which can lead to latex paint.

Moldy wallpaper, floors, etc.

The fixation of the wall during the decoration process can play a certain role in preventing moisture and avoiding mold. Sometimes, even if the worker's putty is well scraped, it is easy to crack the wall. This is mainly due to the problem of the wall foundation.

For example, the amount of cement used in the walls of our new house is not enough, or there is a problem with the mortar ratio, which affects the adhesion of the walls. The base layer will crack after a long time. Therefore, in order to prevent the cracking of the white latex paint in the later stage, it is necessary to paint it on the wall.

Due to the strong adhesion of the wall fixings, the wall cracking can be reduced. The most common color on the wall is yellow. So, after painting the walls with wall rebar, we can see at a glance where the paint is not in place.

In the place where the wall is fixed, another point is that when we apply putty to the wall, we can also clearly see the construction of the bottom putty. This is wall-fixed and can play an additional role. You can cut through a wall and see how it penetrates.

If there is only wall fixing on a simple surface, but not on the inside, then we can be sure that the wall fixing product is not very good. The deeper the penetration, the better the effect of fixing the wall.

It is necessary to brush the wall, because this can make the wall stronger, but also enhance safety, can avoid some safety hazards, and can also avoid damage to the wall, so I think this is a very necessary decoration measure.

Of course it is necessary. Because the wall can be cleaner by brushing the wall, it can also make the wall more flat and prevent the wall from peeling off the paint, so the step of brushing the wall can not be omitted.

It is necessary. Because this material is very useful, it can have strong permeability, it can make the wall very strong, and it can also avoid wall hollowing.