What to do with the insects in the finished product of the wooden pier sculpture, and what to do if

One: paint treatment. For some corners that have not yet been damaged, paint such as tung oil, shellac paint or varnish is used to brush the surface of the article to make moths.

Isolate from the air to achieve the purpose of mothproofing. Be careful to apply evenly when applying.

2: Pharmaceutical treatment: When wood products are eaten by insects, dichlorvos can be used.

and water in the ratio of 1 5 to prepare the liquid medicine, with a sprayer to spray the whole way, so that the liquid medicine infiltrates into the wood products, to spray 3 times 5 times in a row, after 8 hours, can kill all the moths. After that, rinse with water and dry.

Three: Rub the wood products that have been eaten by insects on sunny days with diesel fuel, and paint all the wood products with a brush or cotton yarn dipped in diesel fuel 1 time. Dry for two or three hours and then apply it once, and then dry it again, and wait until you see the borer dead in the hole. Then use laundry detergent.

Wash and dry.

Wood and vegetable pier insects: first wash with detergent and check dry, and then use a special planer to remove the surface foam wood of the vegetable pier (there is no special wood planer can also use a sharper kitchen knife to scrape off the foaming surface), and then use vegetable oil to maintain it frequently, first: it will not be in the raw insects, second:

There are no more cracks. Three generations of my family have been chefs, so you might as well try it and it works.

It can be sunburned or soaked, it may be that there is a problem with the wood you use.

After reading the answers of the above two, I think they are all good! It seems that it is not easy to do at home! It is estimated that the insects in the sun will not have any effect on it, the wine bubbles, and the vegetable dun are estimated to be not worth the wine money, and the oil is not suitable for family use!

Smoke it! Find a larger plastic bag, with incense on it, light, or mosquito coils, or find an airtight bag, that is, a vacuum bag for clothes and quilts, so you can think it! It's all about what tools are available!

Sprinkle enough camphor in the space under the floor.

The pine is not replaced, and the new pine is soaked in zinc chloride and dried.

The floor itself will not have bugs in general, and it is in the process of making solid wood flooring.

In Zhi, high-temperature baking DAO is an indispensable process. This process, which is carried out in a high temperature and humidity environment, not only dries the wood sufficiently and maintains a certain moisture content, but also kills the insects and eggs that may be present in the wood. In addition, the finished solid wood floor should be completely painted on the outside, and even if there are insects that have not been killed, they will be suffocated to death.

Therefore, a good hardwood floor will not bring bugs and eggs into the room. Paving solid wood flooring requires the use of keel, wooden keel is usually not processed at high temperature, is likely to leave the hidden danger of insects or eggs, when the humidity and temperature are suitable, it may be eroded by insects, and damage to the floor, put insect repellent to prevent insect infestation.

Solid wood flooring is a high-end product in the same category, however, because solid wood flooring is more environmentally friendly, it has always been favored by many consumers. However, the inherent impression that "solid wood flooring is prone to insects" has been bothering many consumers. In addition, they are hesitant to choose the material of the floor.

In fact, as long as you are in a regular store and choose a regular brand with a quality monitoring report, the chance of insects after solid wood floor paving is very small. So what did the worm come from? According to many industry insiders, consumers generally have strict quality control when buying flooring, but they are somewhat negligent about the keel, a necessary accessory for paving flooring.

In fact, most of the floor insects are due to keel insects. Qualified wooden keels are generally made of pine wood, and must be fully dried, and the overall appearance is straight, without obvious deformation and bending. And after you lay the wooden keel, before laying the moisture-proof mat, be sure to put some special insect repellent or camphor wood blocks between the keel to avoid the occurrence of insect moths in the future.

Or you can also choose to use aluminum alloy rails to lay the keel, this material is anti-aging, corrosion-resistant, no need to drill holes in the ground, it is very convenient, can save you a lot of trouble before and after decoration.

The goal of success is a motivation that pushes us to keep going. Don't be blinded by the fog in front of you, even if there is a big difficulty, it is a temporary obstacle, treat it with an optimistic attitude, success is behind the fog.

Generally, the pests that eat wood are caused by the larvae of the longhorn beetle.

1.The longhorn beetle is a general term for insects in the family Coleoptera, with long antennae, often exceeding the length of the body, and there are about 20,000 species worldwide.

2.Because of its strength like a cow and good at flying in the sky, the longhorn is named longhorn; And because it makes a "click, click" sound, its sound is very similar to the sound of sawing trees, so it is also called "sawing tree lang". In addition, some areas in the south of our country call it "water cattle", and some areas in the north call it "spring cattle".

3.Its larvae overwinter in the woody of the damaged trees, and begin to moth after March of the following year, most of the larvae are chiseled in the tree about 4 cm long, 2 3 cm wide pupal chamber and a circular feathering hole through the epidermis, and begin to pupate when the temperature rises to more than 15 degrees, and the pupation is completed in May.

4.The longhorn beetle mainly feeds on larvae, lives the longest, and causes the most serious damage to the trunk. When the eggs hatch out of the larvae, the first instar larvae are bored into the trunk of the tree, initially feed under the bark, and after the inage increases, they burrow into the xylem for damage, and some species only stay under the bark to live, not into the xylem.

The larvae move within the trunk of the tree, and the shape and length of the moth-eating tunnels vary from species to species.

5.Find the wormhole first, then use a cotton ball to dip dichlorvos into the hole, and then seal the hole with wax to fumigate the larvae in the hole, which plays the role of poisoning.

Because you should have been deceived, some unscrupulous merchants deceived you by applying camphor oil to other wood.

The solution to the dry cracking of the wooden pier color board:

Soak the vegetable pier in water, and after a period of time, the small crack will slowly close, although the small crack does not affect its quality and use, but it is best to avoid it as much as possible.

Pay attention to the following points when using wooden pier cutting boards:

1. Equip the vegetable pier with a clean special (with a certain amount of moisture) towel cloth, and the size of the towel should be subject to completely covering the entire cutting board surface and edge, so that it can not only play a moisturizing role, but also prevent the cutting board from blowing.

2. The new vegetable pier should be used frequently, should not be left for a long time, often kept moist, and placed in a cool place to prevent it from blowing or exposing to the sun at the tuyere.

3. If you want to use it once for a period of time, you must dry or dry the willow vegetable mound and put it in an impermeable plastic bag and seal it to prevent it from blowing; Especially in dry places, such as in the northern regions.

It is especially important to keep the vegetable mound moist.

4. If there are small cracks on the edge (after all, this is not a steel plate or a plastic plate), don't be in a hurry at this time, immediately put the vegetable pier into the water to soak, and wait for a period of time The small crack will slowly close, although the small crack does not affect its quality and use, but it is best to avoid it as much as possible.

After washing with water, dry (do not expose to the sun), and brush a layer of cooking oil on top so that it will not crack.

Find the worm's eye, pour medicine into it, and then use wax to seal the worm's eye.

The cutting board of the log pier is infested, and the cutting board can be boiled in a pot to kill the insects.

It's going to be replaced, and the cutting board made of rice husks is going to be replaced.