What you don t want to do if you don t want the magnolia tree to grow taller?

I want white orchids.

At the same time, it is also necessary to prune the trunk and branches, minimize the frequency of fertilizing the white orchid and reduce the light appropriately, so that the white orchid pot can be better dwarfed and grow without problems.

The method of dwarfing the potted white orchid.

1. High pressure. White orchid potted method dwarfing.

Many people who maintain white orchids indoors will find that it will grow taller and taller, so if you want to maintain it indoors, you can use a plastic bag to cover it on the top of the white orchid, and tie the two ends of the bag tightly so that there is a certain pressure on the top of it, which can effectively keep it in a dwarf state.

2. Prune. White orchid potted method dwarfing.

It can be truncated when the white orchid grows more vigorously in spring, the specific length can be determined according to the growth of the white orchid, do not cut it very short, otherwise it will affect its normal growth, it is best to separate the pruning of its trunk and branches in the spring, so that it can better dwarf.

3. Reduce fertilizer.

White orchid potted method dwarfing.

The white orchid grows because of its sufficient fertilizer, if you want it to dwarf, you need to control the frequency and amount of fertilizer, and insist on providing it with only a small amount of fertilizer, which can maintain normal growth, which can greatly slow down the growth rate of white orchid and provide a very favorable condition for its dwarfing.

4. Reduce light.

White orchid potted method dwarfing.

If you want to achieve the purpose of dwarfing the white orchid potted plant to be carried out by a variety of means, try to slow down its growth rate, then you need to use artificial intervention means, sunlight is also an important factor to make the white orchid healthy, the more sunlight it grows, you can appropriately reduce the light to achieve the purpose of dwarfing.

The overall requirements for the maintenance of foliage plants are suitable height, plump plant shape, fresh and pleasant leaf color, and no pests and diseases. Pruning can be done according to this consideration, if the plant is too tall, the top branch should be reduced (to the part that is considered to be the appropriate height), through the reduction of the pruning not only to control the height, but also to send new side branches to make the tree plump. For old leaves and residual leaves, they should be cut off in time, so that new leaves can also be promoted.

For overly dense branches, cross branches, dead branches and other branches should be pruned, through the pruning of these branches, ventilation can be improved, not only conducive to the growth of plants, but also plump at the same time, so that the plant is simple and bright. Of course, this is the method of pruning, for your fortune tree should be cut there, how to cut it, but also through your practice, or paste ** in the question column, it can help you give specific advice. In short, in addition to the high top branches of the tree to be pruned ruthlessly, it is better to cut in place at one time, and the rest of the branches should be carefully observed back and forth before cutting, do not easily cut down, or start cutting from the parts that need to be cut the most, not necessarily cut at one time, you can cut it in a few days, so that there is room for thinking, and it is a choice to reduce misses.

Many decades-old tree bonsai are made by constant pruning.

In addition, there are two tips: one is that if the top branch of your fortune tree is thicker, you can use a saw to cut it, and the cutting edge is required to be flush; Second, after cutting, the incision should be sealed with anti-inflammatory cream, paint, petroleum jelly, etc., which is conducive to speeding up the healing of the wound.

The dwarfing of the white orchid is mainly controlled by pruning its trunk and branches, and the main stem and branches should not be pruned at the same time, generally the main stem and branches that are too long are truncated to inhibit its growth, and the application of water and fertilizer to it should be reduced in the later stage, so as to achieve the purpose of dwarfing it.

How white orchids dwarf the method.

How white orchids dwarf.

If you want to control the growth of the white orchid, let it gradually dwarf can be controlled by pruning the main stem and branches, generally the branches of the white orchid are too long, and the main stem and branches can be pruned separately at different times, and at the same time, the application of water and fertilizer should be reduced, so as to control the growth well.

How to care for white orchids.

1. Light. How white orchids dwarf.

White orchid is a sun-loving plant, the more sunlight it grows more densely, during the growth period at least need to ensure that it has about 6 hours of light time every day, when in the hot summer to do some shade treatment for it properly, avoid direct light to burn its leaves, do not put it in a shaded environment for a long time.

2. Moisture. How white orchids dwarf.

The growth of white orchid has very high requirements for water, it is not drought tolerant and waterlogging, so the water must be well controlled, spring and autumn can be watered once in 2 3 days, and watered once in the morning and evening in summer, try to keep the basic moisture of the potting soil, and reduce watering about 10 days in winter.

3. Fertilization. How white orchids dwarf.

When the white orchid is in the peak growth season, it needs to be given sufficient nutrients, so that it will grow more robust, fertilization as much as possible to take the principle of thin fertilizer diligent, after fertilization as much as possible to loosen the soil so that it has a certain air permeability, which is more conducive to its root system to absorb nutrients, to the later stage can be better growth.

Magnolia tree breeding should be applied once in February and May 10 days or so, usually appropriate amount of watering to prevent water accumulation, but also to provide it with sufficient light, maintain more than 6 hours of sunlight, keep the growth environment temperature at about 20, and regularly do a good job in the prevention and control of pests and diseases, you can choose grafting and propagation, so that it grows healthily.

Magnolia tree cultivation method.

1. Water and fertilizer management.

How to raise magnolia trees, more than 6 hours of astigmatism and 20 suitable temperatures.

Raising magnolia trees should pay attention to do a good job in water and fertilizer management, in February and May to apply nitrogen, phosphorus and potassium fertilizer once in 10 days to promote its better flowering and pregnant buds, before winter should also be fertilized once to make it better winter, not only apply nitrogen fertilizer, but also pay attention to the appropriate amount of watering, keep the environment moist, do a good job of drainage to avoid water accumulation.

2. Sufficient light.

How to raise magnolia trees, more than 6 hours of astigmatism and 20 suitable temperatures.

Magnolia trees like light and are a sun-facing plant, so they should be placed in a sunny area during maintenance, so that the whole plant can receive more than 6 hours of light, so as to better carry out photosynthesis, so that the branches and leaves of magnolia can grow luxuriantly. Be careful not to place it in a shady place for a long time, as it will make the magnolia tree grow poorly.

3. Warm environment.

How to raise magnolia trees, more than 6 hours of astigmatism and 20 suitable temperatures.

Although it can tolerate a low temperature environment of minus 20, it is best to keep the temperature of its growth environment at about 20, so that the magnolia tree can maintain a normal growth rate, so as to grow and bloom healthily.

4. Pest control.

How to raise magnolia trees, more than 6 hours of astigmatism and 20 suitable temperatures.

The growing magnolia tree is prone to leaf spot, anthracnose and other diseases, so it is necessary to spray the fungicidal solution in time to remove the pathogens, and for the pests such as red wax scales, red spiders, and longhorn beetles that harm the rhizomes and branches and leaves, it is necessary to regularly spray the relevant insecticidal solution to make it not affected by insect pests.

5. Grafting and propagation.

How to raise magnolia trees, more than 6 hours of astigmatism and 20 suitable temperatures.

In the process of breeding, the magnolia tree can also be grafted and propagated, and suitable cuttings can be selected, and it will be grafted on the purple magnolia rootstock in May and June, and it will heal and take root in about 50 days; You can also choose to cut it on a suitable rootstock in March, and it will germinate and grow leaves quickly in 3 to 4 weeks.

You can cut off the bud tip to control the longitudinal growth, and if the effect is not ideal, you can also dilute and spray the whole plant with mequat or arthropoan to inhibit the growth of height and promote the lateral growth of germinated leaf buds. The time of pruning should be controlled at the time when the germination strength is strong, such as in late spring, must not be pruned in a hot climate, otherwise the water is easy to lose, resulting in dehydration of the whole plant, and can not blow the wind, it is best to cut the mouth with mud paste.

This one grows taller naturally. I guess it can't be stopped! Estimated to be.

Branches can be pruned irregularly.

It's hard to intervene unless you're pruning.

It can be used to press the branches.

If you want to dwarf the white orchid pot, you can use a plastic bag to increase the pressure on the top of it to achieve the purpose of dwarfing it, and at the same time, you also need to prune the main stem and branches, minimize the frequency of fertilizing the white orchid and reduce the light appropriately, so that the white orchid potted plant can be better dwarfed and there will be no problems with growth.

The method of dwarfing the potted white orchid.

1. High pressure. White orchid potted method dwarfing.

Many people who maintain white orchids indoors will find that it will grow taller and taller, so if you want to maintain it indoors, you can use a plastic bag to cover it on the top of the white orchid, and tie the two ends of the bag tightly so that there is a certain pressure on the top of it, which can effectively keep it in a dwarf state.

2. Prune. White orchid potted method dwarfing.

It can be truncated when the white orchid grows more vigorously in spring, the specific length can be determined according to the growth of the white orchid, do not cut it very short, otherwise it will affect its normal growth, it is best to separate the pruning of its trunk and branches in the spring, so that it can better dwarf.

3. Reduce fertilizer.

White orchid potted method dwarfing.

The white orchid grows because of its sufficient fertilizer, if you want it to dwarf, you need to control the frequency and amount of fertilization, and insist on providing it with only a small amount of Bika water-soluble fertilizer, which can maintain normal growth, which can greatly slow down the growth rate of white orchid and provide a very favorable condition for its dwarfing.

4. Reduce light.

White orchid potted method dwarfing.

If you want to achieve the purpose of dwarfing the white orchid potted plant to be carried out by a variety of means, try to slow down its growth rate, then you need to use artificial intervention means, sunlight is also an important factor to make the white orchid healthy, the more sunlight it grows, you can appropriately reduce the light to achieve the purpose of dwarfing.

Pro, you can refer to the following measures: The high-pressure method of tying both ends of the plastic bag is used to propagate and dwarf the plant. Perform stub pruning to cut off parts of branches that are too long and too long, which can be pruned before germination in early spring.

The way to keep the trees from growing taller is to cut off the crown and build branches every year! The same goes for Magnolia!

Magnolia is a tall tree, and if you want it to grow taller, you can only go to the top and let it grow in an umbrella shape.

Many people who maintain white orchids indoors will find that it will grow taller and taller, so if you want to maintain it indoors, you can use a plastic bag to cover it on the top of the white orchid, and tie the two ends of the bag tightly so that there is a certain pressure on the top of it, which can effectively keep it in a dwarf state.

As long as the management measures are strengthened and the water and fertilizer are concerned, it is fine.

Magnolia tree cultivation methods and precautions:

If you want to grow magnolia trees, you can do it during the spring and keep it in well-drained soil. During the maintenance period, the temperature can be stabilized at about 20 degrees, which is conducive to the growth of magnolia trees. During the maintenance period, the magnolia tree should be given sufficient light and water and fertilizer, but it should be noted that the magnolia tree is not tolerant to strong light and waterlogging, so it should be reasonably maintained.

1. Soil. 2. Temperature.

Magnolia trees are thermophilic and suitable for growing in warm, moist and well-ventilated environments. The temperature suitable for the growth of magnolia trees is about 20 degrees Celsius, which can promote the growth of magnolia branches and leaves and the opening of flowers. Magnolia trees are hardy, but they can be kept indoors during the winter to help them grow in the coming year.

3. Illumination. Magnolia trees like light and are more shade-tolerant, but magnolia trees are not tolerant to strong light. In spring and autumn, magnolia trees can be maintained outdoors in a sunny location to allow them to photosynthesize. During the hot summer, in order to avoid sunburn, the magnolia tree needs to be moved to a cool and ventilated place indoors for maintenance.

4. Water and fertilizer. Magnolia trees prefer moist environments, but are not tolerant to waterlogging and should be watered and fertilized in moderation during growth. During the maintenance period, according to the dry and wet conditions of the soil, water the magnolia tree appropriately to keep the soil moist. When fertilizing magnolia trees, it is necessary to pay attention to the frequent application of thin fertilizer before flowering, such as the use of potassium dihydrogen dihydrogen phosphate in Trim, and the need to control fertilizer during flowering to avoid flower shedding.

Magnolia trees should be cultivated in fertile, loose, well-drained slightly acidic sandy soils. Magnolia is not tolerant to cold, so it needs to be carefully maintained in winter and summer, and it needs to be protected from strong light exposure in summer when the sun is strong. Magnolia trees have strict requirements for water and fertilizer, and need to be properly watered and fertilized in order for them to grow well.

1. The soil is suitable

Magnolia flowers bloom brightly and fragrantly, and are famous as an ornamental tree in the garden. Many people don't know how to raise magnolia trees, and the cultivation of magnolia trees is inseparable from the right soil. Magnolia trees prefer fertile, loose, well-drained slightly acidic sandy soils, and clay soils with poor air permeability should not be used.

2. The temperature is suitable

Magnolia is not tolerant to cold, except for South China, other regions need to be transplanted to indoor maintenance in winter, the minimum temperature should be kept above 5 degrees, magnolia is a positive plant, the growth period needs to be maintained in a place with strong light, keep the daily light sufficient, and the sun needs to be protected from strong light exposure in summer.

3. Reasonable moisture

Magnolia is a plant that is afraid of waterlogging and drought, and needs to be watered every day in the hot summer, and the plant needs to be moved to a sheltered place in the rainy season, and no water can accumulate to avoid damaging the roots. Each watering needs to be watered thoroughly, if it is semi-wet for a long time, it will lead to shallow roots, the soil needs to be watered immediately when the soil is dry and hard, and the soil temperature and water temperature should be consistent when watering.

4. Reasonable fertilization

Magnolia fertilization needs to be carried out in stages, February before flowering and May after flowering, these two time periods need to be fertilized every ten days, and the fertilizer is suitable for nitrogen, phosphorus and potassium compound fertilizer. When the leaves fall in winter, humus fertilizer with key phosphorus and potassium should be applied to enhance the cold resistance of the magnolia tree and better flowering and growth in the next year.