How to lay the bedspread is the right one, and whether the sheets should be laid on top or under the

Bed sheets should be spread on top of the bedspread, which is easy to wash. If you use a bedspread, it is recommended to spread a simple sheet of the same color on top to avoid the bedspread being dirty and difficult to wash.

The variety of bed sheets is all white, plain, striped, printed, jacquard, brushed, etc. The appearance of all-white bed sheets is white, and they are generally woven with natural cotton yarn, and then bleached and whitened to finish.

Plain sheets are made of dyed white blanks. Lattice sheets are woven with colored yarn (thread). The same color and different shades are called plain strips, different shades are colored strips, and satin stripes separated by satin and other textures are called satin strips.

Bed sheet fabric is characterized by flexible width, color and shape, according to the different raw materials used, there are two types of pure cotton and blended. Pure cotton sheets are breathable, hygroscopic, comfortable and soft to the touch, thick and wear-resistant. The warp and weft yarns are single yarns called yarn woven sheets, all strands are called whole line sheets, and the yarns are interwoven with strands as warp yarns and single yarns as weft yarns called half-line sheets.

Blended bed sheets are available in cotton, cotton polyester and cotton linen, which have the advantages of easy washing and quick drying, stiff scraping, firm and wear-resistant.

The length and width of the bed linen are determined according to the size of the bed, and there is a distinction between Chinese and Western styles.

Chinese bed sheets are generally 210 228 cm in length and 100 200 cm in width. Fabrics are usually made of heavy weaves, variations, or joint weaves, and have a thicker texture.

Western-style bed sheets are generally about 108 inches in length and inch in width. Generally, plain or twill weave is used, the texture of the fabric is thin, and the flower pattern is mostly scattered all over the ground. Some products are brushed and have a good feel and warmth.

Bed linen can be made however you want. Just lay the sheets flat.

Under the bedspread, remove the bedspread before going to bed, get up and lay the bedspread, clean and beautiful.

Bed spreads on top, sheets are easy to wash.

Above, shop below are all lying to you.

Place the bed sheet first and then put the bed cover.

Make the sheets first, then the bedspreads.

Bed making sequence: 1. a mattress;

2. The fitted sheet is covered on the mattress and wrapped around the mattress to ensure that the mattress is clean.

3. The bed quilt is placed on the mattress to increase comfort.

4. Bed sheets. 4. a bedspread.

5. Pillows, cushions, quilts.

First the sheets, then the bedspreads.

1. The use of bedspreads and sheets is different, the sheets are spread on the surface of the mattress, while the bedspread is spread on the surface of the quilt we cover, which can cover the entire bed, including the sheets.

2. The difference between the appearance of the bedspread and the sheet, the width and length of the bedspread will be longer than the sheet, and the bedspread goes out next to the pillow side, and the other three sides are sagging lace with beautiful decorations, and the size of the sheets is smaller, not to mention, there is no decorative lace.

Make the sheets first, then cover the bedspread.

Still using an "old-fashioned" bedspread? Try it with a new version of Dragon and Phoenix Chengxiang, and go up the next level in a blink of an eye.

It is easiest to buy coarse cloth to do.

Just sew a large cloth larger than a bed, and then sew the edges.

The coarse cloth is very close to the bed and will not be out of shape. The quilt cover is like sewing a bag and a chain, which is 1 cm larger than the quilt core.

Is it for your own use, it's very simple.

Is there a sewing machine, the sheets and the bedspread are measured and the raw edges can be tied up.

The quilt cover is well measured, sewn on everything and becomes a bucket. If you want to zip on the side or on the front, you can leave a gap, and you can also sew it with thread after ** put it in.

Once you have determined the size of the sheets and the fabric to be used, you can sew them. Fabric: You can choose romantic and comfortable fabrics according to your preferences.

First of all, the cloth is flattened, measure the required length and width with a ruler, you can appropriately leave a little more seam head, after marking it, use scissors to cut it smoothly along the edge of the mark, and finally sew the four sides of the edge, the seam head should be equidistant, the stitches are uniform and smooth, and there is no sense of wrinkles.

European and Korean bed linens.

This type of sheet is a little more complicated, but more delicate and beautiful, with an emphasis on the sewing of lace, which has drooping lace and ropes, but the lace has no wrinkles. Leave a large seam for double-layer sewing. European bed linen lace has folds.

According to the equidistant pressure cloth into the sewing.

European and Korean bed linens.

This type of sheet is a little more complicated, but more delicate and beautiful, with an emphasis on the sewing of lace, which has drooping lace and ropes, but the lace has no wrinkles. Leave a large seam for double-layer sewing. European bed linen lace has folds.

According to the equidistant pressure cloth into the sewing.

Cutting and sewing of quilt covers.

Before making it, we need to measure some of the dimensions we need, the regular size of the bed is rice, rice and rice, which determines the size of the sheets.

The size of the quilt core determines the size of the quilt cover, and the quilt core is mainly divided into 5*7, 6*7 and 7*7 feet. Here I would like to remind the audience that you must be clear about the size of your quilt core and bed when you buy and make, and then release the appropriate shrinkage and seam when making, so as not to make the size too small after washing.

The production of the quilt cover is cut into two pieces of cloth of the appropriate size (generally slightly larger than the quilt), the front is aligned, that is, the reverse side is placed outward, and the surrounding area is sewn with a sewing machine or hand needle, one of which leaves a place for sewing the zipper, and the zipper is aligned twice and sewn on both sides.

When we usually use the quilt cover, there will also be such a problem, that is, the quilt and the quilt cover are easy to "separate", run back and forth, or shrink into a ball in the quilt cover, here is a small trick for everyone, we can sew a thin cloth strip of about ten centimeters at each of the four corners (used to tie the four corners of the quilt to prevent the quilt from being strung in the quilt cover), and finally turn it over to be a usable quilt cover. If you want to be a little stronger, turn the cover over and sew it around the side, so that there will be a side around the cover, which is both beautiful and strong.

Pay attention to the place where the zipper is sewn, do not sew the zipper to death, and also pay attention to the material of the zipper when sewing the zipper. Try to choose the same or close fabric as the quilt cover, which is convenient for sewing, and will also make the stitches not easy to fall off, and it will be more soft in use.