What is the car faucet logo? What does the faucet logo for the dashboard of a car mean

Oil pressure warning light. The appearance of this alarm light indicates that the oil pressure is not enough to meet the oil lubrication of the engine, so it must be checked and repaired when it appears. Generally, in this case, it is necessary to check whether the oil is missing, whether it is oiled, whether the oil pressure sensor wire is off, and whether it is damaged.

It is advisable to go for repairs as soon as possible.

There is a faucet on the dashboard of the car is a sign of the car engine fault light, which is always on, indicating that the engine combustion state is not good, the engine knocks, the fuel quality is not good, and the inside of the engine cylinder is not clean. During our driving, if the engine fault light is on, it is likely that the engine burns badly, the engine knocks, the fuel quality is not good, the engine cylinder is not clean, etc.

The faucet sign you are talking about should be the engine fault light, and the light of the water thermometer is in the shape of a thermometer. Under normal circumstances, if the engine fault light is yellow, it should not be a major problem, and it may also be caused by poor fuel quality. No matter what the problem is, if you find it, you can repair it in time.

After all, safety comes first.

A yellow or red faucet on the dashboard indicates that there is a problem with the engine and should be serviced in time.

This icon is a car engine fault light. During driving, if the engine fault indicator lights up, it may be that the engine is in a bad combustion state, the engine knocks, the fuel quality is poor, the inside of the engine cylinder is dirty, there is carbon deposit, computer data is not available, and so on.

It should be an engine failure.

This faucet sign indicates that there is a problem with the machine, and you need to use the computer to detect and troubleshoot.

The landlord may be talking about the engine alarm light (please see if it is the sign in the picture), and the general engine alarm may be that the throttle is dirty and needs to be cleaned up. or oil is not good and other problems, it is recommended that please use the computer to detect the fault code as soon as possible 4S, and then troubleshoot.

It is a sign of a failure in the discharge system.

The main problem may be that the oil is not good, the combustion is not complete, the emission design of the Peugeot car is higher, so it is also more picky about the oil, it may be the same oil, other car series have not reacted, the Peugeot car has the emission lights on, the car is shaking.

You can put neutral gear, the engine steps to 4000 rpm, blast the throttle for 1 minute, and it can generally be improved.

If it still doesn't work, it may be that the throttle valve is dirty, or the ignition coil is faulty, and you should go to 4S to check it as soon as possible.

Engine logo. If it is lit in normal driving, go to the 4S store as soon as possible!!

A tip that needs to be refueled with oil or fuel.

The faucet is an oil indicator light, go to the 4S shop and let the master take a look.

The faucet sign on the car is the engine fault light.

1. The engine fault light is used to show the working condition of the vehicle engine. When the ignition switch is turned on, after the vehicle completes the self-test, the indicator light will automatically turn off after it is lit; If it is solid on, it means that the vehicle's engine has a mechanical failure and needs to be repaired.

2. There are many reasons for the engine failure light to turn on, such as the failure of the purification solenoid valve, the failure of the air flow meter, the failure of the ignition coil, the failure of the thermostat, the failure of the three-way catalytic converter, the failure of the oxygen sensor, the excessive carbon deposition of the electronic throttle, etc.

The car faucet sign is that when the engine (exhaust system) fault light is on, if the water temperature gauge and oil pressure warning light have not been alarmed, then the car can still drive. But be sure to walk slowly and look for the nearest garage for maintenance. If the water temperature is too high or the oil pressure warning light is on, and you clearly feel that the vehicle is malfunctioning, you should pull over immediately and call for help.

Causes of engine (exhaust system) failure lights to light up: poor fuel quality, carbon deposits in spark plugs, faulty oxygen sensors, engine knocking, damaged water temperature sensors, missing cylinders in the engine, etc. If left unaddressed, it can lead to engine damage and emissions that do not meet the standards.

The car display faucet symbol refers to the car engine fault light, and the reasons for its lighting are: 1. The engine combustion state is not good; 2. Engine knocking; 3. Poor fuel quality; 4. The inside of the engine cylinder is not clean. Car dashboard indicators are divided into:

1. There is an exclamation mark in the middle of the yellow triangle, which refers to the driving force indication alarm light; 2. There is an exclamation mark in the middle of the yellow parentheses, which refers to tire pressure monitoring, fault indicators, etc.

A yellow faucet sign appears on the dashboard of the car, and this is the engine warning light. It means that the oil pressure is not enough to meet the oil lubrication of the engine, so it must be inspected and repaired when it appears.

In this case, it is necessary to check whether the oil is missing, whether it is oiled, whether the oil pressure sensor wire is off, and whether it is damaged.

ExpandExhibition Materials

The danger of the engine failure light on.

After the engine fault light is on, there are always some abnormal states, if not solved in time, it is usually accompanied by the following problems:

1. The quality of automobile exhaust gas deteriorates and pollutes the environment;

2. Increased fuel consumption of automobiles, waste of petroleum resources and RMB resources;

3. The temperature of the combustion chamber increases and the wear intensifies, which may lead to early damage to the engine;

4. The engine burns engine oil;

5. The engine noise increases, affecting the comfort of driving and riding.

This is the fault light of the engine, if the car is still lit after starting, it means that the electronic control system of the engine is faulty, and you need to go to the shop for maintenance in time.

The car you bought is not from the original manufacturer, right? Maybe it's a miscellaneous car.

There is a faucet on the dashboard of the car with a sign that the car engine fault light, which is always on, indicating that the engine is not in a good state of burning and burning, the engine is detonating, the fuel quality is not good, and the inside of the engine cylinder is not clean. The common reasons are: 1. The oxygen sensor is in poor contact and damaged, so that the computer cannot identify the combustion of the engine, resulting in the failure of the automatic control function of the emission part.

2. The cam sensor and crankshaft sensor are damaged or have poor contact, resulting in inaccurate ignition time, which makes the fuel combustion insufficient and the efficiency is seriously reduced. 3. The contact between the throttle motor, the throttle sensor, the air flow sensor, and the absolute pressure sensor is poor or the parameters change, resulting in the computer being unable to accurately judge the air supply, resulting in the inaccuracy of the fuel mixing ratio and the incomplete combustion of the fuel. 4. The resistance of the water temperature sensor changes, resulting in the improper starting time of the electronic fan, which makes the engine working temperature deviate from the specified value, or causes the cylinder and pipeline to be poorly sealed after high temperature, and the engine work efficiency is reduced.

5. The fuel has impurities or moisture, which increases the pollutants in the cylinder, resulting in poor discharge of the spark plug, insufficient combustion, and substandard exhaust. 6. Water leakage in the water tank causes the temperature of all parts of the engine to rise, resulting in changes in sensor parameters everywhere. 7. Poor contact of the oil pump makes the fuel injection poor, resulting in incomplete combustion of the engine.

The sign is the engine fault light of the vehicle register, which is an indicator light that shows the working status of the vehicle's engine. This faucet sign indicator lights up and turns off automatically during the vehicle pre-start self-test, indicating that the vehicle's engine is normal and there is no fault. If the indicator light does not go off for a long time, it means that the vehicle's engine has a mechanical fault and needs to be repaired.

Reasons for the yellow light of the vehicle faucet:

1.When the vehicle starts normally, if the yellow light of the faucet is on, it flashes for a few seconds and then turns off automatically, so there is no need to panic. This is a normal test of the vehicle itself. After the yellow light goes out, you can drive in gear normally.

2.When the vehicle starts normally, if the yellow light of the faucet is on and does not go off after a few seconds, it will stay on. At this time, you need to make some mental preparation. The state closed wheel could be a problem with the vehicle, or it could be that there is some malfunction in the vehicle's exhaust system.

Solution: You need to go to a 4S shop or repair shop to check, and you can't find out the reason.

3.When the vehicle starts, the faucet yellow light turns on and flashes for a long time. This is the problem of the vehicle alerting the driver that the engine is not fire.

4.When the spark plug is damaged, the fault light will come on because after the spark plug is damaged, the ignition system of the engine will be affected, making it difficult for the engine to start, resulting in insufficient combustion of the mixture.

5.A severe drop in cylinder pressure in a vehicle's engine can cause the fault light to illuminate.

6.Poor sensor contact, signal problems, or damage can also cause the fault light to come on.

7.There is a problem with the vehicle's fuel pump, and the oil circuit is blocked, which will also cause the fault light to come on.

8.A clogged cabin air filter in your car will cause the fault light to come on.

In addition to the first case above, the car owner needs to go to the 4S shop or repair shop as soon as possible to investigate the specific reason, and the individual cannot make an accurate judgment. Millions of car purchase subsidies.

The faucet sign in a car means that there is a faulty engine or a problem with the exhaust system. 1.

It is due to poor combustion state of the engine, engine knocking, poor fuel quality, unclean engine cylinders, etc.; 2.It is also possible that it is due to carbon deposition in the spark plug, carbon deposition in the engine, damage to the water temperature sensor, problems with the air flow sensor, problems with the oxygen sensor, etc.; 3.No matter what the cause is, it is recommended to go to the 4S shop or professional auto repair station as soon as possible to check and eliminate the problem.

The reasons why the engine does not light up are as follows:1. Sensor Manuscript Posture Problem:

When the water temperature, crankshaft position, air flow, intake air temperature, oxygen sensor is damaged, the contact is poor, or the signal is interrupted, the automotive ECU cannot accurately obtain the engine data; 2.Maintenance problems: untimely maintenance and poor driving habits will aggravate the pressure of engine operation; 3.

Oil problem: The fuel added to the car is labeled, and not adding the key as required will definitely cause engine wear; 4.Poor combustion of air-fired mixture:

It will cause carbon deposition or knocking in the engine, which will be detected by the engine's oxygen sensor; 5.False fault: bumps in driving, engine plug being pryed, ECU signal temporarily interrupted; Wait a minute.

The sign of a tap on the car is a car engine failure light, indicating that the car engine has failed. When the engine fails, it will cause the car to idle unsteadily, easy to stall, difficult to start, weak power, abnormal shaking, etc. When the faucet sign is displayed on the dashboard, you should immediately go to the repair shop and ask a professional to inspect the car to prevent unnecessary trouble.

Introduction to Car Dashboard Lights:

Daily indicator: The daily indicator is what we usually contact the most. Common ones include high and low beam indicators, seat belts without warning lights, turn signals, and parking brake indicator orange pins.

The role of the warning indicator is to inform the driver of the condition of the vehicle. It is generally used to indicate the amount of storage of each type of oil. When the fuel storage capacity is in an emergency, the vehicle will display a warning indicator on the instrument, which is usually orange or red.

Common ones are fuel indicators, oil indicators, and coolant indicators. The elimination of some indicators of this round is very simple, as long as the oil is replenished in time, it can be eliminated. Fault Indicator:

The function of the fault indicator is to inform the driver of the current fault location of the car. When we see this kind of indicator light, we must not take it lightly. Go to the repair shop in time to inspect the car.

Common fault indicators are engine fault lights, battery fault lights, and airbag fault lights. Millions of car purchase subsidies.

This is the engine failure light. The indicator light is used to show the working condition of the vehicle engine, when the ignition switch is turned on, the finger skin collapse indicator light will automatically turn off after the vehicle completes the self-test. If it is solid on, it means that the vehicle's engine has a mechanical failure and needs to be repaired.

There are many reasons for the engine failure light to turn on, such as the failure of the purification solenoid valve, the failure of the air flow meter, the failure of the ignition coil, the failure of the thermostat, the failure of the three-way catalytic converter, the failure of the oxygen sensor, the combustion circle, the excessive carbon deposition of the electronic throttle, etc. During driving, if the engine fault light is on, it is likely that the engine combustion state is not good, the engine knocks, the fuel quality is not good, the inside of the engine cylinder is not clean, there is carbon deposit, the computer cannot obtain engine data, etc. Most cases do not go away automatically once the engine fault light is on, but the false fault will go away automatically.

If it is a major failure, it will be accompanied by engine weakness, large shaking, high water temperature, multiple fault lights on the dashboard, etc., this period of banquet needs to stop the car and turn off the ignition, waiting for professional rescue. If only the engine fault light is on, and the rest is relatively normal, it may be a false fault, and driving for a period of time may automatically eliminate it. If it is not eliminated, you can go to the repair point to solve the problem.

Photo by Wu Binbin, Pacific Automobile Network).