What is the reason why the electric water faucet does not heat?

1. The heating tube is broken. In this case, a new one needs to be replaced.

2. Power supply problem. If the power plug is broken, repair or replace it with a new one.

3. The problem of tap water pressure. The water pressure is too small, resulting in not reaching the heating standard, and the water pressure switch is placed inside the electric hot water faucet, and the water pressure is too low to trigger the water pressure switch. This situation requires increased water pressure.

4, Rebao is broken. In this case, you need to replace it with a new hot treasure.

Electric water faucet products have fast (3-5 seconds to produce hot water); Convenient (no need for special installation, instant heating, hot and cold dual-use, adjustable temperature and flow); Safety (automatic power-off without water, water and electricity separation settings).

Energy saving and environmental protection (water and electricity saving, pollution-free); Aesthetics (fashion design, home décor); Small (does not take up space); multifunctional (magnetization, purification); Economical (compared to water heaters or other electric heating devices) and other characteristics, it is a must-have kitchen and bathroom small household appliances for modern family life.

Electric hot water faucet products are designed for kitchen and bathroom small household appliances that cannot be heated normally, and are the best choice for kitchen washing, dishwashing, cleaning, bathroom hand washing, face washing, hair washing, laundry and other hot water convenient use. It solves the daily needs of hot water in family life and public places, so that your family can easily use hot water 24 hours a day, 365 days a year.

Saiwell, who specializes in safe electric hot water faucets, said that there are several reasons why instant electric water faucets do not heat, and it is necessary to prescribe the right medicine.

The most common problem is the power supply, when the electric hot water faucet cannot be heated, the first thing to check is whether the power supply is not plugged in properly. Failure to plug in the power supply is a very common problem that leads to not heating, and it is also the most easily overlooked.

Another reason that is often overlooked is the water pressure of the tap water. If the water pressure of the tap water is too small, it will not meet the standard of heating. Because the inside of the electric hot water faucet adopts the technology of cutting off water and electricity, the water pressure switch is installed inside.

When the water pressure is low, the switch cannot be opened, the circuit contacts cannot contact each other, and the heating element cannot be heated normally.

If there is no heating problem when the water pressure is normal, it is likely that the contact is malfunctioning or damaged. For this kind of problem, it is necessary for professionals to carry out repairs.

Hello, the electric hot water faucet is not hot, you can check a few points: one is to use other electrical appliances or professional equipment to test whether the jack has electricity; Second, there may be problems with the faucet, the circuit may be damaged, you can find a professional to overhaul it; The third is circuit protection, which may be soaked in water inside, so it is necessary to pay attention to electrical safety. If you don't understand it, you have to find a professional to check it, I hope it can help you.

There is no electricity in the power supply.

The tap water pressure is not enough.

The indicator light is on, the water is not hot, and the heating element is faulty.

Five-second thermoelectric hot water faucet, the power supply is electrified. The indicator light is not on, the water is not hot, and the contact switch or thermal protection is damaged.

Generally, it is a heating element, and there is a problem with the heating protection device, or it is possible that the power cord is not plugged in. My household electric water faucet has never appeared in such a situation, you can change the Kinod electric water faucet, the quality is good.

There are three situations: Situation 1: The indicator light is on, but it is not heated.

1. Heating body problems: In the case that the water pressure, power supply, and contacts are normal, most of them are because of the heating element and heat protection, and these problems need to seek the help of professional electricians, and you can call after-sales service. The solution is also very simple, just change to a new heating element or thermal protection.

2. The electric hot water faucet is an electrical product, if you are not very sure that you can solve some faults, you must ask professionals to repair it. Refer to the manual before repair to avoid losses. When in use, it is necessary to do regular maintenance work on the electric hot water faucet to prolong the life of the electric hot water faucet.

Situation 2: The indicator light is not lit and not heated. 1. Power supply problem:

If the power supply is not plugged in properly and the product is not energized, the machine will naturally not be heated, but it is often easy for us to ignore this problem. 2. Tap water pressure problem: the pressure of tap water is too small, resulting in the fierce hall not meeting the heating standard.

The inside of the electric hot water faucet adopts the technology of cutting off water and electricity, that is to say, there is a water pressure switch placed inside.

When the water pressure is low (below, the switch will not be opened, resulting in the circuit contacts can not be contacted, so the heating element will not heat normally. 3. Thermal protection problem: If the water pressure is normal, you can ask a professional to use a multimeter.

Detect whether the two ends of the thermal protection are on, if not, the thermal protector is burned out, and the thermal protector can be replaced with a new one.

Hello dear, how to maintain the electric hot water faucet if it is not heated: 1. Power supply problem: check whether the power supply is plugged in tightly, if the power supply is not plugged in, it is normal for the electric hot water faucet not to be heated, but often we are easy to ignore this problem.

2. Tap water pressure: If the pressure of tap water is too small, it will not meet the standard of electric hot water faucet heating. The inside of the electric hot water faucet adopts the technology of cutting off water and electricity, that is to say, there is a water pressure switch placed inside, when the water pressure is low, the switch will not be opened, resulting in the circuit contacts can not be contacted, so the heating body will not heat normally.

3. Electric shock: If the water pressure of the tap water is normal, then it may also be that the contact is out of order or damaged, and in this case, you need to ask a professional to help. 4. Fuse problem:

If the water pressure, power supply, and contacts are normal, then most of them are because the thermostat and fuse are broken, and these problems also need to seek the help of a professional electrician, and you can call after-sales service**. The solution is also very simple, and it is enough to change the fuse of the garter hunger. Advantages of electric hot water faucet 1, safety electric hot water faucet has good safety performance, has the function of preventing leakage, guarantees the safety of the human body, guards to prevent rust, the product also uses plastic shell, and at the same time uses leakage protection switch.

2. There are more than one line of temperature control intelligent system protection for high temperature control intelligent protection, which can intelligently sense the temperature of the hand, product safety and long service life. 3. The heat-resistant electric hot water faucet of the high-temperature test pipeline can not only withstand high temperature, but also quickly transfer the temperature, accelerate the water flow to heat, and improve the product efficiency. 4. It is convenient and practical to adjust the water temperature as you like, and you can choose the right temperature as you like, so you don't have to worry about hot hands.

Dear, hello, I am happy to answer for you, how to repair the electric hot water faucet without heating The answer is as follows: 1. How to repair 1, the heating pipe is damaged, in this case, you can directly replace the new heating pipe. 2. If the power supply is damaged, resulting in the electric hot water faucet not being hot, it can be solved by replacing the new power plug.

3. The tap water pressure is not enough, resulting in the electric hot water faucet not being hot, and the water pressure needs to be enhanced. 2. What are the advantages of the hot water faucet next to the electric section: 1. No preheating is required.

The electric hot water faucet heats up quickly, does not need to be preheated, and only needs to open the faucet, and hot water can be provided after a few seconds, which is very convenient and can meet the fast-paced life needs of young people, not only saving water, but also saving electricity, and the overall appearance is beautiful and generous, highlighting the fashion. 2. Energy saving. How much water is used in the electric hot water faucet, how much water is put in, there is no need to preheat in advance, which truly saves electricity and water, and is most affordable, so it is welcomed by many consumers.

3. Safety and environmental protection. The electric hot water faucet is safe and reliable, with grounding protection measures, and will automatically disconnect when there is a leakage problem, and the safety is very good. 4. Small size.

The electric hot water faucet is small in size, light in weight, easy to install, and the design is very user-friendly, streamlined in appearance, and is welcomed by many consumers. 5. The water temperature is constant. The temperature of the water outlet of the electric water faucet will not be hot and cold.

6. Long life. The electric hot water faucet has a long service life, it is not easy to form scale, and in the heating process, the heating of the machine will not be very high, so the damage probability of the heating element will be reduced accordingly, so the service life of the electric hot water faucet will be longer. I hope this service can help you, thank you for your consultation, and I wish you all the best!

This may be the case with an electric water heater.

If the heating pipe of the head is broken, or there is a problem with the power supply of the electric faucet, or the "hot treasure" inside is faulty or broken, in this case, the damaged parts need to be replaced with new ones, and the problem can be solved!

In addition to the damage of the parts, if the water pressure in the water pipe is too small, the water pressure entering the electric faucet cannot reach the standard, and the heating switch in the electric faucet cannot be triggered, which will also cause the situation that it cannot be heated. At this time, you can either wait for the water pressure to return to normal, or you can install a booster to solve the problem of insufficient water pressure.

So what are the problems that need to be paid attention to when installing electric water faucets:

1. When installing, the electric hot water faucet should try to avoid colliding with hard objects, and do not leave cement, glue and other adhesives that are easy to fix on the surface of the water heater.

2. Before installing the electric hot water faucet, the debris in the pipe should be removed, and the faucet should be installed after cleaning.

3. Don't use too much force when turning on and off the electric hot water faucet. Because the current electric hot water faucet switches are basically fragile, if you screw the electric hot water dragon stove crack head like a traditional metal faucet, it is easy to close and cause damage to the faucet switch.

4. If the water pipe is a metal hose.

Do not wrap it around the electric water faucet when not in use, and at the same time, pay attention not to form a dead angle at the connection between the hose and the valve body in use, so as not to break or damage the hose of the electric water faucet.

The reason why the electric hot water faucet with temperature display suddenly does not display the water temperature and does not produce hot water is generally that the heating cavity inside the electric hot water faucet or the electrical control cavity is damaged and cannot be repaired, and the user can directly replace the electric hot water faucet with a new one.

The electric hot water faucet comprises the faucet body and the water flow control switch, the faucet body is provided with a heating chamber and an electrical control cavity, separated by a sealing plate, an electrical appliance control cavity is provided with a heating circuit, a heating pipe is arranged in the heating chamber, the heating pipe power is generally in 2-3kw, hot water can be heated out in 3-5 seconds, the heating pipe is connected to the heating circuit, and the heating pipe is characterized in that the heating pipe is an insulated heating pipe; The insulated heating pipe is a water and electricity isolated insulated heating pipe; Most of the faucet body is a high-temperature resistant engineering plastic type, and a few are all-metal type; There is an insulated water pressure switch in the electrical control chamber.

The heating circuit is equipped with an electrical switch, which is connected with the end of the insulated water pressure switch, which can turn on and off the water and electricity, and is equipped with a temperature controller and an anti-dry burning device, and can also be equipped with a leakage protection switch. Extended Information: Precautions for the use of electric water faucets:

1. The maximum water temperature should not exceed 50 degrees Celsius.

2. It is forbidden to use it upside down.

3. The nozzle must be kept unblocked, the nozzle hole must be cleaned frequently, and it is forbidden to access the shower nozzle and other flow blocking elements with a water flow switch.

4. This water heater can be used for connection and use on the water supply pipe network, and is connected with metal pipe fittings to keep the product well grounded.

5. The pressure of the tap water used should not exceed the pressure indicated in the sign, and it must be reliably grounded.

If the heating indicator light on the machine is on, but there is no hot water, it may be that the heating wire is broken, and the heating tube needs to be replaced, if the heating indicator light is not lit, the hot water is not out, it may be that the heat inside is broken, or the heating wire is broken and the lamp is broken. For specific problems, you need to contact the manufacturer's after-sales service, so that the manufacturer's professional master can test it, determine the cause and repair it.