How to check the balance of a laser printer cartridge

How to check the balance of the laser printer cartridge:

1. Look directly at the ink dot indicator on the printer or all-in-one machine, when the ink dot indicator on the printer or all-in-one machine shows orange, it means that there is a lack of ink.

2. Computer view: click"Get started"-"Settings"-"Printers and faxes", right-click the check-marked printer icon, and then tap"attributes"-"General tab"-"Printing preferences"-"Main window"-"Cartridges"You can see the remaining representation of the ink volume, and there is a red fork on the yellow break-in to indicate that the yellow ink cartridge has been used up.

A laser printer is a printout device that combines laser scanning technology with electrophotographic technology. Its basic working principle is the binary data information transmitted by the computer, which is converted into a signal by the controller, and then converted into a laser driving signal by the interface control system, and then a laser beam containing character information is generated by the laser scanning system, and finally the laser beam is imaged and transferred to paper by the electrophotographic system. Compared with other printing equipment, laser printers have the advantages of fast printing speed and high imaging quality; But the cost of use is relatively high.

Generally, when the life of the ink cartridge is approaching, it will be prompted, but it can be seen from the number of printed sheets, and then check the number of printed sheets of each color in the printed copy (the number of prompted sheets is the number of remaining sheets that can be printed).

Your machine can't check the margin, only the number of pages printed, and the specific method can be referred to:

There are not many pieces of paper displayed in household products, you can only estimate by yourself, a full toner cartridge can print about 1500 sheets, a pack of paper 500 sheets, that is, three packs of paper, you can buy an extra toner cartridge for backup, and so the printing is faint, you will naturally know the lack of toner, at this time you can continue to use a toner cartridge, empty toner cartridge to add powder yourself, the cost is only 20 yuan.

Another tile small office products, can not print a few hundred at once. Take a break every time you print a few dozen copies. Either the printer will break down after a few hits. This model is not suitable for continuous printing without stopping.

1. First of all, find the printer's settings panel, click [Wrench Icon], the icon is behind the number 3;

2. After clicking the [Wrench Icon], the display frame of the printer will display [Main Menu], and after the icon is displayed, click the [Backward Arrow] on the printer panel;

3. After clicking the [Backward Arrow], the display box will display different options, find [Report];

4. After finding [Report], click [OK] on the printer;

5. Then click the printer's [OK], the display box will show several options, find the [Consumables Status Page], and click the printer's [OK] again;

6. After clicking [OK] on the printer again, the printer will print out a [Consumables Status] file, and you can see the remaining amount of the printer's toner cartridge.

1. The service life of the toner cartridge has been written in the product manual. Such as 1500 sheets, 2000 sheets.

2. On the LCD screen operation panel of most printers, in addition to the control key, there is also a record display function of the number of printed sheets, which can be easily called up and viewed. As for those printers that do not have this function (entry-level products, or old products), they can only be judged from the fact that the printing effect is still unacceptable after maintaining and cleaning the toner cartridge and changing the toner. Experienced or professional, one look at the color of the toner cartridge surface coating to determine its life status.

3. In actual use, some printer toner cartridges will not work if they do not use the parameter value limit; There are also many sheets that exceed the parameter value limit, but they are still in normal use. The reason for this is that the content (text, graphics) printed on each page is somewhat different. If there is more content on each page, the photosensitive coating on the surface of the toner cartridge will wear out faster; If there is less content per page, there will naturally be less wear and tear.

The 1500 parameters given by the manufacturer are a statistical average and a reference value.

From the above analysis, it can be seen that prolonging the life of toner cartridges has a great relationship with the specific printing content and daily maintenance.

HP LaserJet M1522 MFP Series - Management Consumables.

Inspect and order consumables.

You can check the status of your consumables using the product dashboard, by printing the consumables status page, or by viewing the HP ToolboxFX. HP recommends ordering a replacement toner cartridge when information about insufficient toner in the cartridge first appears. Use the new genuine HP toner cartridge to learn about the following consumables:

The remaining time of the cartridge's life.

The estimated number of pages remaining.

The number of pages that have been printed.

Other consumables information.

Note: If this product is connected to a network, you can set HP ToolboxFX to notify you by email when you run out of toner in the cartridge. If the product is connected directly to a computer, you can set HP ToolboxFX to notify you when supplies are running low.

Use the control panel to check the status of your consumables.

Do one of the following:

Check the product control panel to display information if the toner cartridge is low or depleted. When you install a non-HP toner cartridge for the first time, the control panel also displays the appropriate information.

Print the consumables status page, and then check the consumables balance on the page.

Use HP ToolboxFX to check the status of your consumables.

You can configure HP ToolboxFX to notify you when you run out of toner in the cartridge. Choose how you want to receive alerts, such as email, pop-up messages, or taskbar icons.

It is different, and the operation method with and without the display is different.

In Control Panel, press and hold the Cancel button until the Ready light starts flashing, then release the button.

The machine prints out an offline self-test with information on it.

To print a consumables status page, select the page from the Print Information Page drop-down list on the printer driver's service label. Consumables status page.

The following information is provided:

The estimated percentage of toner remaining in the print cartridge.

The number of pages and print jobs processed.

1. You can visually inspect whether the black magnetic stick on the side of the toner cartridge core is unevenly sticky, and if there is powder, it will be all black.

2. You can swing the toner cartridge from side to side, try the effect, compare the previous printing effect, if it is much better, you can basically confirm that the powder is not enough.

Toner steps: 1. Preparation.

Prepare a special toner for laser printers suitable for the printer model, and carry the tools for refilling the laser printer toner cartridge, including: screwdriver, diagonal pliers (tip pliers), cotton, brushes, leather tigers (or hair dryers), etc.

2. Disassemble the toner cartridge.

First, take out the toner cartridge from the laser printer, find the fixing screws on the printer's toner cartridge cover, use a screwdriver to remove the screws that fix the toner cartridge cover, and put the screws away. Then use a "one" screwdriver to gently pry open the buckle on the toner drum cover, and then open the toner drum cover. When the toner cartridge lid is opened, there will be waste toner left in the toner cartridge spilled, in order to prevent pollution, we should spread a newspaper on the table in advance, and pay attention to keep the working environment clean during the toner cartridge powder filling process.

3. Clean up the remaining toner in the toner cartridge.

To clean up, first pour out the waste toner cartridge and toner cartridges, then gently remove any toner remaining on the edges of the cartridge with a brush. Where the brush can't be cleaned, we can use a leather tiger or a hair dryer to clean up the waste toner. After cleaning the toner inside the cartridge, we also need to use a brush to clean the toner around the cartridge.

4. Add new toner to the toner cartridge.

After the above cleaning, the next step is to add new toner to the toner cartridge, unscrew the cap of the purchased toner bottle when adding, remove the sealing paper on the bottle mouth, and slowly pour the toner into the toner cartridge until it is full. When pouring toner into the toner cartridge, in order to avoid spilling the toner outside, we can use printing paper to pad the mouth of the toner cartridge to facilitate adding powder to the toner cartridge.

After the toner is added, cover the toner cartridge and the waste toner cartridge and tighten the screws. Then use a clean brush or soft cloth to wipe off the toner around the cartridge. Before putting the toner cartridge into the printer, we first shake the toner cartridge from side to side with our hands so that the toner in the toner cartridge is evenly distributed so that it can print normally in the future.

5. Install the toner cartridge into the laser machine and test the printing effect after the toner cartridge is powdered.

The situation you are talking about is that there is no powder, and the remaining powder is unevenly distributed, resulting in white strips being printed, so change the toner cartridge again, or add powder to the toner cartridge.

Shake your hand and feel it, you can't see it if you want to use the software.

If you don't think you run out of toner, just add it.

Note: Yes, you're going to add powder.

It's just that there's no powder.,Open the toner cartridge and see.,There's no other way,

To be precise, the software cannot correctly evaluate the balance of carbon town letter powder, and can only be measured by looking at the clarity of the handwriting typed out by itself. Generally, it is not very clear and local travel Li does not search for rotation when you can add powder, but before adding, you have to pour out the remaining before.

Estimate how much ink you have left based on the cartridge weight.

There's software, right? Mine is hp.,When you install the driver.,There's an automatic installation of software.,You look carefully for the option version of the software.,You can see it inside.。

The remaining ink amount of the printer can be queried in the printer's properties as follows:

Click the "Start" menu in turn, and select "Settings" - >Printers & Faxes" to enter the "Printers & Faxes" window, as shown below

Right-click on the printer you want to see the ink level and select "Printing Preferences", as shown below

In the pop-up properties window, you can view the ink balance, as shown in the following figure

Printers and Devices--- Right-click on the printer icon--- print properties --- preferences--- look at the top and see which one is inside.

You can see it in the printer properties.

This machine doesn't seem to have the function of directly outlining the toner balance, so you can only weigh the toner cartridge by hand by feeling!

Teach you the most straightforward method.

This model of toner cartridge can print about 2000 pages.

The A4 paper you usually use is a 500-page bag.

That is to say, when you use 3 and a half packs of paper, you are almost out of powder.

Normal Printers:

1. Open the control panel on your computer.

2. Click "View Devices and Printers".

3. Find the printer you are using, double-click the printer icon 4. Click "Check Ink Levels" in the above picture or check the ink level to open the page below.

Laser Printer:

There are generally two ways to do this:

1. The toner cartridge is obviously lighter, you can pick it up and shake it, and if you feel that there is no movement in the toner cartridge, you can judge that the toner is running out;

2. As you said, when you see the printed font becoming lighter, you can also take it out and shake it well, maybe you can insist on using it for a while, but it also means that the toner is almost gone.

If you do not send the original ink when you buy the printer, Jianyi buys the original, otherwise it will affect the life of the printer.

If the toner is low, you can continue to print for a long time, until the toner is exhausted.

The next time the toner is used up, it should be cleared after adding powder.

The method is: separate the toner cartridge and the compact, unscrew the three screws on the left side of the compact, there is a circle of less than half on the left side, black (everyone says white, it is estimated that my 7340 is black, and some of them may be white), there is a black clip in the circle, to dial the black clip from below to above, the specific method can be: take down the plastic sheet where the circle is located, there is a white gear inside, and the black clip in the circle will be adjusted from the side down to the other side of the circle up after adjusting the gear.

Then there is a hole in the middle of the transparent plastic on both sides of the cartridge and plug it with paper. Screw the screws back into the toner cartridge and put it in the printer, and you're good to go!