The main points of the library transfer are the two types of library transfer jobs

The key to library transfer; 1) To control the speed of the car 2) to see the point 3) to see the direction of the point to hit in time 4) the most important thing is that every time you practice, your speed and the speed of the direction should be consistent. In this case, the coach will be able to correct you if you are leaning to one side.

Pile dumping trajectory, stacking steps and reversing operation details.

1.From the starting point to the left library reversing into the left library, stop right, 2Then after two advance and two retreat to the right library, stop positive, 3Advance from the right library through the left library, to the road, 4Pour from the right library into the right library, stop right.

5.Advance from the right library back to the starting point.

The first step is to enter the left library.

Hang the reverse gear, release the handbrake, lift the clutch to the semi-linkage, slow down the car in first gear, look at the bar to the right rear, when the No. 1 lever and No. 6 lever are aligned, hit the direction to the right, and kill (play two laps). When the body enters the left garage and is parallel to the sideline, the direction is to the left, and the return is killed (two laps). Reverse to the bottom of the left garage, keep a distance between the rear of the car and the bottom of the left garage (do not touch the back wall of the bottom of the garage), and stop.

Step 2 Step 1.

When the car starts forward, the steering wheel hits to the right and kills (two laps). When the left front corner of the car is on the second bar (front center), hit the steering wheel to the left and kill (two laps). When the body is parallel to the storage position, turn right back to the direction of the wheel.

Keep the front of the car at a distance from the second shot (front middle bar) (without touching the lever) and stop.

Step 3: The first retreat.

When the car starts reversing backwards, the steering wheel hits to the right and kills (two laps). Wait until the left front rib of the car is on the third bar (front left bar), hit the steering wheel to the left, play three laps, and wait until the body is parallel to the storage position, go back to the right to turn the direction and return to the right.

Look back with your head and the rear bumper at a distance from the 5th (rear midbar) to stop (without touching the bar).

Step 4 The second step is the second step.

When the car starts forward, hit the direction of the right circle, and when the left front corner of the car is on the second bar (front middle bar), hit the direction of the left two circles and kill to the left. When the body is parallel to the storage location, turn the steering wheel back to the right. The second pole (front and middle pole) of the front of the car is parked at a distance (without touching the bar).

Step 5 The second retreat.

When the car starts reversing, from the reversing mirror, look at the center line, and when the rear wheel of the car enters the right garage, hit the steering wheel to the left (two circles on the left), and wait until the body is parallel to the garage, keep a distance between the rear and the bottom of the garage (do not touch the rear wall of the garage bottom), and stop.

Step 6 The car drives out of the left garage from the right library.

At this time, after the transfer is completed, the car passes between the No. 2 and No. 3 levers in the left library from the right library, and waits until the body is completely out of the left library, and kills the steering wheel to the left (two laps on the left). When the front of the car is parallel to the curb line, turn the steering wheel back (two turns) and stop.

Step 7 from the right library between the 1st pole and the 2nd pole and then reverse into the right warehouse.

Hang the reverse gear, lift the clutch to the semi-linkage, look at the bar with your head to the left back, and wait for the No. 3 and No. 4 rods to be aligned, and then hit the left in the direction, kill (play two laps), and trim the direction into the right library. When the body is parallel to the sideline, the wheels are straightened. After the front of the car is completely reversed into the right storage position, it stops.

The eighth step is to go out of the right library. When the middle of the rear door passes through the No. 1 lever, the steering wheel is killed to the right (two turns), and when the body is parallel to the sideline, the wheels are returned to the center and the distance from the front stop line is kept to stop smoothly.

Regarding the pile transfer of the library, the method is the key, the method is very simple, and the method is improper, it is very troublesome. It is recommended that you go to Douding.com "Driving Test Cheats", or you can go to ** online shooting.

Hello, there are two types of transfer operations: 1. The subdivision of commodity types causes the storage location to move. For example, food, Hu Sullen is divided into dairy products and snack foods; 2. The storage location change and temporary storage needs between process operations, such as the transfer of the finished product general warehouse to the processing part of the warehouse; The needs of daily warehouse consolidation operations, that is, the "defragmentation" work in the warehouse; Changes to warehouse location arrangements.

For example, if the warehouse needs to reduce energy, temporarily integrate multiple sub-warehouses into one main warehouse; The simple principle of moving the warehouse: to ensure that the main plan of the warehouse is not disturbed, and the entry and exit of the market is unimpeded.

Step 1The first reversing into storage: hang the reversing gear to the gear, lift the clutch to the semi-linkage, adjust the speed, look to the right rear, when the front right rod (No. 1 lever) and the rear left rod (No. 6 lever) are aligned, the direction is to the right to kill, when the body parallel edge enters the garage, the direction turns left and right, and the marking point coincides with the middle rod when the parking bush is buried.

2: First Entry: Put the first gear into gear and hit it to the right. When the front left corner of the car is opposite the middle and upper bar (2 strokes), kill to the left. When the car is parallel to the garage, turn right in the positive direction, being careful not to touch the lever.

3: The first retracement: hang the reverse gear, hit the right direction, the left front rib of the bus and the left front bar (No. 1 bar) when the left direction is aligned, turn right when the bus is parallel to the garage, and stop when the bottom of the middle bar is visible.

4: Second gear driving: hang first gear, kill to the right. When the front left edge of the car is aligned with the front middle bar (2nd pole), turn to the left and stop the car (do not touch the lever) while maintaining the distance between the car and the front middle bar (2nd pole).

5: 2nd backwards: hang reverse gear, kill to the right, look backwards, when the upper right corner of the back of the left rear seat is close to the right rear lever (lever 6), turn back to the direction, the car is parallel to the garage, and stop at a certain distance from the bottom line.

6: Left out of the warehouse: hang a gear, to the left to kill, turn right when the car wears the number pole, kill to the left when the front of the car overlaps with the curb line, turn right when the car is parallel to the curb line and stop.

7: last1 reversing into the garage: hang the reverse gear, lift the clutch, control the speed, turn left slowly when reaching the standard line, so that the marking point is always around the center rod direction into the garage, when the body is parallel to the sideline, turn back to the positive direction, the front of the car completely into the garage and stop.

8: After the delivery is completed, the first gear is hung, and when the right front lever (lever 3) is passed through the middle of the right rear door, it is killed to the right, and when the body is parallel to the sideline, turn right and complete.

Millions of car purchase subsidies.

Here's how to move the library:

1. Make full use of a reference object at the front of the car, when the reference object is located in the middle or side of the road, you should be able to correctly feel the position of the vehicle, so as to determine the timing and amplitude of hitting the direction or returning direction.

2. It is necessary to make full use of the afterglow of the two eyes to overcome the phenomenon that the eyes see far away and do not care about the near and cause the correction direction to be late.

3. Develop a good habit of not moving the steering wheel if the front of the car is not deflected.

A short pause is allowed before being ready to enter the garage, and candidates can take the opportunity to look at the garage sideline from the rearview mirror to determine the angle of the steering wheel when reversing.

1. Make full use of a reference object at the front of the car, when the reference object is located in the middle or side of the road, you should be able to correctly feel the position of the vehicle, so as to determine the timing and amplitude of hitting the direction or returning direction.

2. It is necessary to make full use of the afterglow of the two eyes to overcome the phenomenon that the eyes see far away and do not care about the near and cause the correction direction to be late.

3. Develop a good habit of not moving the steering wheel if the front of the car is not deflected. When correcting the direction, the word "timely" should be achieved, and the amplitude should be moderate, generally slightly earlier when returning to the correct direction, and the amplitude should be small;

4. Combined with field training, train the timing and speed of steering, such as figure-8, S-shaped and right-angle turns;

5. When the vehicle is driving on the right side, in order to prevent the car from skewing to the right, the steering wheel should be turned left to no swimming clearance, so that the left hand can feel the position of the vehicle at this time.

Grading Criteria. 1. If you do not drive in the order of the prescribed route, 100 points will be deducted.

2. If it is not completely poured into the warehouse, 100 points will be deducted.

3. 100 points will be deducted for the body line.

4. 100 points will be deducted for stopping halfway (once the GPS positioning determines that the vehicle is in a state of complete stopping, the student will be directly deducted 100 points.) )

1. The outer right is poured into the left library.

2. The left library is changed to the right library.

3. The right library is out of the left library and opens to the left outside.

4. Pour the left outside into the right warehouse.

5. The right library is straight out of the right outside.

- --- the transfer is completed

Moving the garage is to move the car from one side of the library to the other side of the library through a short distance forward and backward.

When the car is driving, the front wheel rotates by the steering wheel to implement the virtual body to turn left to right, and in the process of turning, if to the required angle, the wheel should be kept straight with the body in order to move forward or backward in a straight line in the predetermined direction, otherwise, it is necessary to deviate from the target direction.

Under normal circumstances, the steering wheel should be turned to the left twice to the end, and the second circle should be in the same direction as the body, so that it can be straight forward or backward. To the right too.

When reversing, it is generally two laps to the left, two laps to the right after being in place, a lap to the right after a lap to the left, and half a lap to the right after the left half a lap in place, otherwise the car will deviate. The same is true to the right.

In the process of moving forward and reversing the vehicle, it is necessary to pay attention to whether the angle between the wheels and the body meets the required requirements at all times.

When practicing for the first time, especially when reversing, press your hands on the steering wheel and do not shift your hands back and forth. Remember the number of laps to the left or right, and then be sure to hit the same number of laps back so that the car can be positive.

When moving the library, it is necessary to go up and down two times to meet the requirements of the transfer.

The first up, the first down as much as possible, the second up, the second down a little less, easy to correct.

First, try to go to the right first to ensure that you don't get out of the line, and then go all out to the left.

When the first is on, start as soon as possible and hit the right direction for the second lap. When the front of the car is obviously tilted to the right, you can look for signs such as the left and right side of the front of the car over the gear bench burning rod, and then quickly turn back to the left four times, kill it, and make the front of the car to the left. Because:

The front of the car starts to the right, and if you don't hit the left in time, you will qualify. Therefore, the fight and return should be fast. Stop the car.

At this time, he was killed by the direction to the left, and the wheels leaned to the left. If the wheels do not tilt to the right when reversing, the car will deviate to the left.

The first time, start at the same time quickly to the right steering wheel four times, killed, at this time the front wheel to the right, the car to the right, to a certain point, all the way to the left four circles, killed, the car to the left, try to put the car right.

When the second thick bucket is on, start four laps to the right, and after the killing, to a certain point, hit three or four laps to the left, and the body is timed, and the direction is back one or two laps. Make sure the direction of the car is as correct as possible.

The second time is the same as the first operation, but the correction of the components is more, do not need to be completely killed, and the car is completely in the right garage when parking.

As mentioned above, first of all, we must form an understanding of why we do this in our minds, do not reverse the operation when we go up, and operate the action skillfully during the actual practice, so that there is no mistake in the action, and then experience the turning point to ensure the accuracy of the library.

When reversing backwards, see the horizontal line to hit the direction to the end, when it is almost to the rod, look at the running direction of the car, let the distance between the two sides adjust, see the car into the garage after looking at the rear rod, and then adjust. If you want to call a car to the right, go to the right, and if you want the car to go left, go to the left. The first move to the right to the end, see the left wheel overwhelm the middle line, and then quickly hit the left to the end, and then go back to the right to the positive wheel.

The first retreat to the right quickly hit the end, and then to the left to the end, and then back to the positive wheel, the second into the right slightly to the right to play the direction of the Jianpei to the right to let the left wheel rush to the front source rod, back to the positive wheel (back to the wheel is how much, back to how much) the second retreat, to the right direction (do not need to hit the end) to see the right corner of the back feel out forty centimeters, and then to the left.

Find a car and practice more, it's useless to just talk to you, driving is to practice, it's not as easy as you say.

M-shaped Move from one side of the garage to the other Reversing first.