What to do if an outlet catches fire in your home?

First of all, the current situation is generally not the situation of socket fire, circuit safety has been protected in place, automatic power-off switches are available in several nodes, such as homes, corridors, communities, etc., layer by layer.

If the socket is on fire, the first step is to pull down the power cut, and then cover the socket with a wet towel to extinguish the fire.

Electrical fires are often electrified, and fighting them with water can cause electrocution. Therefore, in the event of an electrical fire, the first thing to do is to cut off the power first, and then put it out. If you can't be sure that the power is off, you can use a dry powder fire extinguisher or wrap the fire with an impermeable item such as a quilt or blanket to let the fire extinguish itself, or you can use sand or soil to extinguish the fire.

If the socket at home is on fire, first cut off the power supply at home, and then take a fire extinguisher or call 119** for rescue.

If the socket at home is on fire, you should immediately pull down the electric switch at home, and then use the fire extinguisher at home to extinguish the fire, if the fire is relatively large, you should immediately call the fire alarm**.

First of all, you should cut off the power supply at home, and then use a fire extinguisher to extinguish the fire, and never use water to extinguish the fire.

Be sure to use a dry powder fire extinguisher to extinguish the fire, and if you don't have a fire extinguisher, be sure to call 119 in time.

You should immediately turn off all your electric switches, and then use a fire extinguisher to extinguish all the fires on that socket immediately.

There are three steps to the solution when an outlet in your home catches fire:

The first step should be to pull down the power switch to cut off the power supply and prevent other electrical equipment from being implicated.

The second step is to extinguish the fire with a fire extinguisher to prevent the fire from spreading, and never splash it with water.

The third step is to contact the firefighters in time when the fire is large.

1. Choose non-conductive fire extinguishers such as carbon dioxide, carbon tetrachloride, dry powder fire extinguishers, etc.

2. In the event of a fire, the power supply should be cut off first to avoid electric shock, and to avoid the expansion of short circuit between electrical equipment and lines.

3. Due to moisture and fumigation, the insulation capacity of electrical equipment in the fire area is reduced, and insulated buried tools should be used when the switch is opened.

4. When cutting wires, different lines should be cut at different parts to avoid two-phase or three-phase short circuits, and overhead lines should be disconnected near the supporting objects.

5. When the wire is grounded, the ant should be allowed to set up a warning area to prevent personnel from entering and being electrocuted.

Disconnect the main power supply, check and replace it with a new outlet.

Supplement: 1. Because all the sockets and other electrical equipment in the home are connected in series. Therefore, as long as the electrical equipment is overloaded or short-circuited somewhere in the home, it will affect all the wiring devices connected to it.

2. The idle socket, although it does not run electrical equipment, but its internal contact shrapnel has been squeezed and bent, the zero line and the live wire seem to touch, plus there is too much dust in the isolation place, in case of humid air or a short circuit in electrical equipment somewhere, the fuse (piece) at the main switch does not have time to burn urgently, and the idle socket will be heated and burned at the junction of the zero wire and the live wire, resulting in the phenomenon that the idle socket does not run the electrical equipment.

3. Hint: aThe fuse (piece) at the main switch should be reasonably matched with the corresponding fuse (piece) according to the total current of household appliances.

b.It is recommended that an additional leakage circuit breaker be connected to the main switch, just in case.

If the socket is on fire, turn off the main power immediately, and then cover the fire source with a wet towel.

After the fire is extinguished, if the wire is burned out, replace the wire, replace the socket, and turn on the power after repairing.

It is best not to extinguish the fire with water when the socket is on fire, be careful of electric shock, it is best to cut off the power first, disconnect the switch, and then extinguish the fire with water, or use a fire extinguisher to extinguish the fire, or use sand to extinguish the fire, first of all, disconnect the power supply This is the most important thing.

If the fire on the wall socket at home is too high, contact the firefighters in time, contact professionals to check the line after extinguishing the fire, and eliminate potential safety hazards, and finally replace the new socket.

Fire means cavity skin fire, fire, fire refers to the phenomenon of friction and friction when electrical appliances or circuits are in normal times.

Among all kinds of disasters, fire is one of the major disasters that most frequently and universally threatens public safety and social development.

In daily life, everyone should pay attention to electricity safety, learn basic knowledge of safety production laws and regulations, as well as basic emergency avoidance knowledge and first aid knowledge.

If the fire is too large, you should contact the fire fighter in time, contact the professional after extinguishing the fire to check the line situation, and eliminate potential safety hazards, and finally replace the socket with a new one.

Fire means fire, fire, fire refers to the phenomenon of friction and friction when electrical appliances or circuits are in normal times.

Among all kinds of disasters, fire is one of the main disasters that most frequently and universally threatens public safety and social development.

In daily life, everyone should pay attention to the electrical safety belt limbs, learn basic knowledge of safety production laws and regulations and safety knowledge, as well as basic emergency avoidance knowledge and first aid knowledge.

In the process of daily computer use, computer security precautions are also very important. What should I do if my computer catches fire? In the process of daily computer use, computer security precautions are also very important. What should I do if my computer catches fire?

What should I do if my computer catches fire?

If the computer catches fire, even if the machine is turned off, or even the plug is unplugged, the components in the machine are still very hot, and flames will still burst out and toxic gases will be generated

When the computer starts to smoke or **, immediately unplug the power plug or turn off the main power switch, and then cover the computer with a wet blanket or quilt, etc., which can not only prevent the spread of fireworks, but also block the glass fragments of the fluorescent screen.

Don't splash water on a computer that's on fire, even if it's powered off, as a sudden drop in temperature can burst a red-hot CRT. In addition, there is still residual current in the computer, and splashing water may cause electric shock.

Do not lift the covering**, when extinguishing the fire, in order to prevent the picture tube** from hurting people, only approach the computer from the side or back.

How to pay attention to fire prevention when using electrical outlets?

There is a multi-purpose triple socket and quadruple socket in the power socket, which is easy to use and is favored by students. However, when using this multi-purpose socket, you should pay attention to the capacity of the power socket and not overload it to ensure safety.

The rated voltage and current are indicated on the electrical outlets, which indicates the maximum voltage and current values that the electrical outlets can withstand. The product of voltage and current is electrical power in watts. If you plug in several electrical appliances when using a multi-gang power socket, you should carefully calculate whether the power of the plugged electrical appliances exceeds the allowable rated power of the multi-socket, if it is lower than the rated power of the socket, it is safe to use.

On the contrary, the total power of the appliances used is greater than the rated power of the multi-gang socket, which is unsafe. Because when an electric current passes through a metal conductor, the metal conductor heats up, which is called the galvanic thermal effect, and the greater the current through the conductor, the higher the thermal effect and the greater the calorific value. When a variety of electrical appliances pass through the current.