Where can ceramsite be used today? What is ceramsite used for?

When using ceramsite, different types of ceramsite can be used to prepare sand-free macroporous, all-light, ultra-light steel bars or prestressed concrete with different density and strength grades according to actual needs. It can be prefabricated into various types of wall products and building components, and can also be used for filling, cast-in-place, sliding form and other construction operations. It can be applied to various building systems, such as frame-filled or self-supporting block buildings, one-mold three-board buildings, fully assembled large slabs, internal pouring and external plugging, and full-line pouring sliding form buildings.

The walls (blocks, exterior wall panels, interior partition wall slats), floor slabs, roof panels, beams and columns and part of the foundation in any building can be made of ceramsite concrete, which is incomparable to any other new type of wall.

Summary. Ceramsite is a kind of granular soil, which can be used to raise flowers, because it itself is very light, and there are many pores, generally laying ceramsite under the soil, which can increase air permeability, and also has a certain water retention effect, which can make plant roots grow better.

Ceramsite is a kind of granular soil Xun Hall, which can be used to raise flowers, because it itself is very light and bright, and there are many holes, generally the ceramsite is spread under the soil, which can increase air permeability, and also has a certain water retention effect, which can make the plant roots grow better.

Ceramic can not be used to pave tiles, which are backfill materials, not tile materials.

The ceramsite is paved underneath and then the cement tiles are laid.

Yes. Normal tiling uses cement and sand.

1. It is used for the preparation of light aggregate concrete

Lightweight ceramsite can be prepared with a density of less than 1600 kg m3 of lightweight aggregate concrete

2. For the production of lightweight blocks:

The lightweight building blocks produced with lightweight ceramsite have excellent properties such as energy saving and environmental protection, light weight and high strength, sound and heat insulation, fire resistance and moisture resistance.

3. Used in the production of lightweight wall panels

The lightweight wallboard produced by lightweight ceramsite has excellent properties such as light weight, high strength, heat insulation, sound insulation, fire resistance, good moisture-proof performance, seismic resistance, impact resistance, and small shrinkage.

4. It is used for roof heat insulation and slope ceramsite

It is used for roof surface heat insulation and slope finding, and has obvious thermal insulation effect; Good integrity, easy construction; High compressive strength; It can be used permanently, the roof can be load-bearing, and the reinforced concrete structure does not need to find a slope, and the drainage slope can be laid according to the use requirements, which greatly facilitates the design and construction.

5. It is used for floor cushion and moisture-proof layer

Ceramsite is used for cushioning to improve the thermal insulation, heat insulation, sound insulation and bearing capacity between floors; It can facilitate the layout and installation of pipelines on the ground. It can also be used for moisture-proof layer to prevent the floor from moisture regain and keep it dry, which is quite beneficial to protect all kinds of wooden floors and plastic boards from deformation and fading, as well as basement moisture-proof and waterproof.

6. For rooftop garden greening

Ceramsite is used in rooftop gardens to reduce floor loads, protect soil from water loss, quickly dredge stagnant water, and maintain soil moisture and fertilizer supply when it is hot and dry.

7. Used for soilless culture:

Pottery is used for potted flowers, horticulture soilless cultivation can not only retain water, fertilizer, keep the soil loose for a long time, prevent soil compaction, but also clean, hygienic and beautiful.

8. For sewage treatment

Ceramsite can be used as a biological carrier in sewage treatment, and filter impurities in sewage, which can adsorb oil and harmful substances.

Ceramsite concrete has been widely used in various types of pre-components and cast-in-place concrete projects for industrial and civil buildings (such as prestressed and non-prestressed, load-bearing structures or enclosures, thermal insulation or impermeability, static load or dynamic load). Ceramsite can also be used in other building materials such as pipe insulation, furnace body insulation, cold insulation, sound insulation and sound absorption; It can also be used as soilless bed material and water filtration material in agriculture and garden.

Light aggregate concrete with ceramsite as coarse aggregate and ordinary sand or terracotta sand as fine aggregate is called ceramsite concrete. The strength of ceramsite concrete for structure can be greater than 40MPa, and the thermal insulation and heat resistance performance are good.

This is a kind of light aggregate concrete, which has better heat resistance and fire resistance than ordinary concrete, but has a lower elastic modulus.

Ceramsite is used to replace the stone in the coarse aggregate in ordinary concrete.

The use of ceramsite is mainly used in construction, garden with hydrophobic two categories, the construction is mainly toilet backfill, floor elevation, ceramsite high-core bricks, etc., with the effect of fire and heat resistance. In terms of gardening, it has the effect of water absorption and so on.

Answer the building ceramsite, because ceramsite is an oval microporous building material made of shale, sea mud clay, mudstone, fly ash, coal gangue and other raw materials. It has a small mass intimacy. Compared to a lot of crushed stone, stones, pebbles and other building materials.

Pangranules have the effect of thermal insulation. Moisture-proof effect, shockproof effect, mainly more energy-saving. It is better to not pollute and the cost is lower.

Ceramsite is a honeycomb-shaped artificial light aggregate, which is formed by high-temperature roasting in a rotary kiln with shale and clay as raw materials. It has a spherical shape, the surface is smooth and hard, the interior is honeycomb, and it has the characteristics of low density, low thermal conductivity and high strength.

The honeycomb structure of ceramsite makes it permeable and breathable, with a certain moisturizing effect, and can be used for artificial wetland backfill, soilless cultivation, hanging garden, etc.

Shale ceramsite and clay ceramsite are used for roof treatment, which can not only keep heat insulated, make a slope layer and prevent the roof from watering, which can reduce the roof pressure.

Shale ceramsite and clay ceramsite are used for the insulation of industrial equipment pipes, heating pipes, air conditioning pipes, steam pipes and other pipes, which can prevent pipeline shrinkage and cold brittleness at low temperatures, and protect the heat part from being lost at high temperatures.

Shale ceramsite and clay ceramsite are used for water treatment: shale ceramsite and clay ceramsite can filter harmful impurities in various chemical, tap water, sewage and other dissolutes, and can be used as adsorption materials to remove mercury and mercury compounds in sewage and industrial wastewater.

Shale ceramsite and clay ceramsite can be used as aggregates to make a variety of different types of lightweight ceramsite concrete, lightweight ceramsite wallboard.

Ceramsite can be placed into this cavity of the soil as a soil protector and can also be used as a building material.

Ceramsite can be used for soil improvement. Due to the good air permeability and drainage properties of ceramsite, it can be added to the soil to improve soil structure and increase soil porosity, thereby improving the soil air permeability, water retention and fertility. In addition, ceramsite can also be used as a soil protector, which can reduce soil moisture evaporation and surface loss, and protect soil quality.

Secondly, ceramsite can be used as a building material. Due to its high strength, low density, and excellent thermal insulation properties, ceramsite can be used to make lightweight concrete, lightweight bricks, insulating boards, and other building materials. These materials not only have good physical properties, but also have good fire performance and acoustic properties, which can improve the safety and comfort of buildings.

The role of ceramsite

1. There are some voids in the ceramsite, and there are many holes inside, which are not solid, so they can play the role of breathability and water permeability in the forest socks, not too stuffy, and can maintain the hydrophobicity of the soil.

2. Ceramsite not only has the effect of breathability and water permeability, but also has a good water and fertilizer retention effect because of its own characteristics, which can absorb some water and nutrients, fill it into its own structure, and gradually release it in the later stage.

3. The ceramsite also has a certain aesthetics, which can be spread on the surface and avoid splashing out of the soil in the pot when watering.