Does the electric heating oil have 123 gears, does the 1st gear cost electricity?

Electric oil heating oil is heated by heat conduction oil.

Those who come to heat up, in the working state, the gear is different, the heat generated is not the same, and of course, the electricity consumed is also different. However, the power consumption of the gear size is not obvious in a service cycle.

Since the electric oil heater has a temperature control circuit, such as automatically adjusting the switch with the temperature, the temperature of the heater housing is higher than the set temperature, the thermostat.

It will automatically cut off the power supply to stop heating, and the heat stored inside will continue to be released outward. When the surface temperature drops by 15, the thermostat contacts will automatically close, and the heating will be heated by electricity, and when the temperature of the shell is higher than the set temperature, the heating will be automatically cut off and stopped. And so on and so forth, and the temperature is balanced.

Therefore, in the process of normal operation, the gear is large, the heating speed is fast, the stop is fast, the gear is small, the heating speed is slow, but the heating time is also long, so calculated, in one night, the power consumption of the large gear will not be much more than the small gear, only slightly larger.

The electric heating oil is mainly composed of sealed electric heating elements, metal heating pipes, and iron heat sinks.

Temperature control element, power switch, indicator light, etc. This kind of heater is to install the electric heating pipe inside the cavity of the heat sink, and the heat transfer oil is injected around the electric heating pipe in the cavity. When the power is connected, the heat transfer oil around the electric heating pipe is heated, rises to the upper part of the cavity, circulates along the convection of the heat pipe or heat sink, and radiates the heat out through the surface of the cavity wall, thereby heating the space environment.

The air-cooled heat transfer oil descends around the electric heating pipe and is heated again, starting a new cycle.

In fact, the 1st gear should be the most "power-saving", because there are divider resistors in the strings in the 2nd and 3rd gears, which means that some of the electricity is used by the divider resistors to do useless work.

The main difference is that Gree's electric oil has the largest power and heat production in the third gear.

1. The power is different: the power of the third gear is higher, and the power of the second gear is lower.

3. The adjustable power is also different: the three gears can adjust three powers, such as 500 1000 1500, and the heating temperature corresponding to each power is different. Two gears can adjust two powers, e.g. 800, 1500.

Summary. The relationship between the electric oil tin gear and temperature, dear hello, the electric oil tin has two heating gears, you can only open one gear or only open the second gear. Only turning on one gear will save power.

The relationship between the electric oil tin gear and temperature, dear hello, the electric oil tin has two heating gears, you can only open one gear or only open the second gear. Only turning on one gear will save power.

Hello dear, there are two gears of heating, you can only turn on one gear or only turn on two gears. Only turning on one gear will save power. When the electric oil is used for heating the nuclear hole in the living room, the grip should be as close to the air convection position as possible, which is both warm and energy-saving.

Since the temperature of the electric oil heater can be as high as 85 degrees Celsius when working, it should be avoided as much as possible when it is used for bedroom heating.

Kiss you so stuffy shirt, open the two gears at the same time, and turn the temperature control twist to the maximum operation in order to make the room temperature rise faster and comprehensively;After reaching a certain temperature, the control is turned off to a low position, according to the size of the room, the small one is turned off at 1200w, so that the 800w gear maintains the temperature of the ant cavity, and the slightly larger one is turned off at 800w, so that the 1200w gear maintains the temperature set, and the large room can only maintain the temperature set by not turning off both gears, and the truth will be understood.

I'll open a small file and warm me.

I turn on the small gear, the temperature is 26 degrees, how much power is consumed.

If you set the temperature above 26 degrees, then the compressor can automatically stop when the set temperature is reached, and then start automatically when the indoor temperature rises. About 5 kWh.

Hello kiss, kiss or so.

The higher the oil level, the higher the temperature。When the temperature reaches a certain position, it will automatically stop heating, and when the temperature decreases, it will automatically heat again. Electric oil heater, also known as oil-filled heater, is mainly composed of sealed electric heating elements, metal heat pipes or heat sinks.

Temperature control element, indicator light, etc.

Advantages and disadvantages of electric oil heaters

Advantages, in addition to being clean and heating better, the electric oil heater is suitable for use in two areas in the bedroom and bathroom. It is also equipped with a rack for drying clothes. Users can also bake clothes on it.

For rainy weather, the role of the electric oil heater is shown.

The heating effect of the oil heater is obvious when it is used, and some oil heater products are also suitable for use in bedrooms and bathrooms. The oil heater does not release any harmful substances to the human body when working, so it is a more environmentally friendly product. On some heaters, there are also shelves dedicated to drying clothes, on which users can bake clothes.

Disadvantages, the warm-up time of the oil tin is longer, and the power is too high, and the meter capacity is small or the voltage is low can not be used in the family. In addition, electric oil heaters have similar disadvantages to heating, that is, they are easy to dry the air in the room.

1. The three gears can adjust the three powers, such as 500, 1000, 1500, and the heating temperature corresponding to each power is different.

The differences are as follows:

1. The power is different. The third gear has more power, and the second gear has less power.

2. Heat production is different. The heat production in the third gear is more excessive, and the heat production in the second gear is less.

The electric oil heater has two heating gears, which can only be turned on one gear or only two gears. Only turning on one gear will save power.

When the electric heating oil is used for heating the living room, it should be as close as possible to the position of air convection, which is both warm and energy-saving. Since the surface temperature of the electric oil heater can be as high as about 85 degrees Celsius when working, when used for bedroom heating, it should be avoided as much as possible from the human head. If there are small children in the house, they should be placed in a place that is not easily accessible to children, or some protective equipment should be added around them to prevent children from getting burned while playing.

If you want to use a three-pin socket with a ground wire, you should never switch to a two-prong socket without a ground wire to prevent danger. And the connected socket should not stand directly above the electric heater, and it is best to use a wire board with an overcurrent protection device.

When you first start using it, you should use the second gear, and when the temperature in the room rises, you can only turn on the first gear, and the first gear is 1000w, which is more power-efficient.

This one is up to you, and you like to drive that.

Only turn on one, of course, saving power.

One is the heating wire, the other is the heating oil, the difference, one is the main electric more.

Advantages: In addition to being clean and having a good heating effect, the electric oil heater is suitable for bedrooms and bathrooms. In addition, some products are equipped with a rack for drying clothes on the top.

Users can also bake clothes on it. For rainy weather, the role of the electric oil heater is shown. Cons:

The preheating time of the oil tin is longer, and the power is too high, and the electricity.

It is suitable for long-term use, has a long life, and has a good effect, but the preheating speed is slow; The electric heater preheats up quickly, but it is not good if it is high, and the life is short, it is easy to dry, and the comfort is poor.

It is suitable for long-term use, has a long life, and has a good effect, but the preheating speed is slow; The electric heater preheats up quickly, but it is not good if it is high, and the life is short, it is easy to dry, and the comfort is poor.

The electric oil heater heats slowly, but the technology and manufacturing process are mature, the quality is stable and not easy to break, and the power consumption is not large. Electric film heater, the quality of the previous years is not very stable, in recent years it is much better, characterized by more energy saving, the thermal effect conversion loss is very small, the heating rate is faster, but once the temperature is turned off, the temperature drops very quickly, if the time at home is longer, use.

Electric oil heaters.

Top 10 list of special deals.

www.Special Sale. cn/dianreyouting

The electric heating oil heater is to install the electric heating pipe inside the cavity of the heat sink, and the heat conduction oil is injected around the electric heating pipe in the cavity. When the power is turned on, the heat transfer oil around the electric heating pipe is heated, rises to the upper part of the cavity, and circulates along the convection of the heat pipe or heat sink