There are 100 simple ways to shape balloons

Balloons can be made into different shapes by various twisting methods, such as petals, arches, etc., which are more common and simple to operate. For example, to make a puppy shape, you need to first conceive a shape in your own mind, and then make a better shape through simple exercises. 1. First of all, blow the balloon, don't blow too full, you need to leave a suitable tail, blow it and tie a knot.

2. After that, the balloon is tied with three identical knots, so that the balloon is divided into multiple points, the shorter is the dog's nose, and the other two slightly longer knots can form the dog's ears. The last segment is the longest and will be used to make the dog's body. 3. Grasp the ears of the second and third sections with your hands and twist them together three times to secure them.

Thus the dog's head is formed. 4. Then make three more bubbles, make a single bubble at the lower end of the head to form the neck, and make two single bubbles below the neck, these two bubbles should be of equal length, it is the dog's legs. 5. Twist the dog's legs together, and pay attention to the legs must be the same length.

6. After completion, make another three single bubbles, this time divide the remaining part into four equal length parts, the first section is the dog's body, and the last three sections are the dog's hind legs and the dog's tail. 7. Same as above, twist the hind legs together, observe whether your dog balloon is twisted correctly, and confirm that the work is complete. Precautions 1, if the technology is high, you can also do other shapes, and at the same time, in addition to choosing the color of the balloon, you should also choose to control its thickness.

And you can also use a pen to make some small designs on the balloons. 2. During the production process, you must pay attention to safety and do not hurt yourself.

1. Prepare the required materials: 2 260 long balloons.

2. The yellow balloon is inflated to a length of about 3 cm at the end of the remaining end.

3. Fold the balloon in half, and fix the air nozzle and the remaining end knotted together, so that the balloon becomes an end-to-end ring.

4. Adjust the knot to the ** position of the balloon and twist it to make it two rings.

5. Press the midpoint of the balloon ring on one side of the pivot point to the pivot point, and twist the midpoint and the pivot point together.

6. Press the midpoint of the large ring to the pivot point and twist it together to form four rings.

7. Make a peduncle: Make a basic twist about 3 cm long at one end of the valve.

8. Plug the basic twist into the axis point of the petals, and the basic twist can become the stamen, and arrange the petals to make them symmetrical and natural.

9. Make a fold twist about 10 cm below the petals.

10. In the same place, make another folding twist to complete the production of a flower.

The simple methods of balloon are: single bubble knot, ring knot, double bubble knot, triple bubble knot, single ear knot, double ear knot, split knot.

1. Single bubble festival

Hold the balloon in both hands with the tail end facing left and the mouthpiece end facing right. Hold it with your left hand, flatten the balloon with your right index finger and thumb, and rotate both hands in opposite directions a few times at the same time, and a separate bubble will appear in your right hand. Repeat the previous step to make multiple consecutive bubbles, no matter how many bubbles you have in your hand, as long as you hold the first and last ones, the rest of the bubbles will not escape.

2. Ring knot

Bend the filled balloon and hold it with your left hand. The thumb and index finger of the left hand pinch a certain point of the balloon and rotate it 3-4 times to the left to fix it, forming an inverted U-shape as shown in the picture. Tighten the balloon mouthpiece, go around the apex of the wide talk U-shaped 3-4 times, and pass the balloon mouthpiece through the gap between the ** of the ring.

After threading, tighten the balloon mouthpiece on the other side (knotting is acceptable) and the knot is complete.

3. Double Bubble Festival

Fold out 1 single bubble first, measure the length of the second single bubble according to the length of the bubble, pinch it with your right hand and then rotate it; In this way, make 2 single bubble knots of the same size; Tighten the balloon mouthpiece, you can follow the method of looping knots (wrap the two single bubble knots together, pass the balloon mouthpiece through the gap between the two single bubbles, and tighten the loop and lock it).

4. Three bubble festivals

Fold out 1 double bubble knot first. Continue to fold a single bubble below, the length of which should be consistent with the double bubble knot; Push the single bubble through the middle of the double bubble knot. The launch is shown in the following diagram. After adjustment, the three-bubble knot is completed.

5. Single ear segment

Rotate 2 single bubble knots, 5cm and 3cm. Hold on to the balloon as shown in the picture below. Pull the single bubble knot outward and rotate it 3-4 times in a clockwise direction. As shown below, the single ear knot (also known as the bear's ear knot is served) is completed.

6. Binaural segments

Fold 2 3cm bubbles first. Pinch the balloon mouthpiece with your left thumb and forefinger, pinch 2 bubbles with your right hand, and rotate the bubbles up 3 times. Use the thumbs and forefingers of both hands to stretch the middle of the double bubble knot and twist it 2 times from side to side.

7. Separate knots

After the balloon is inflated, fold 5 bubbles, 5cm, 3 3cm, and 5cm. Tie the mouthpiece carefully at the end of the last bubble and secure it. Fold the 1st and 3rd 3cm bubbles out of the single ear knot.

Next, hold the balloon in your left hand and use scissors in your right hand to puncture the third 3cm bubble.

Uses of balloons

There are many types of balloons, and now they mainly introduce balloons produced by natural latex, which can be used as decoration, arches made for opening celebrations, can be printed with their own advertising patterns as publicity, can be printed with photos of the newlyweds as congratulations, can be decorated with balls, newlyweds floats, etc., and now balloons have become a beautiful landscape, more and more favored by people.

Balloons can also be used as decorations and as a means of transport. If the balloon is large enough and the gas inside is lighter than the same volume of air, the buoyancy generated exceeds the weight of the airbag and attached objects (e.g. gondolas, hot air balloons, etc.), the balloon can be raised.

The method of modeling balloons is as follows:

1. The yellow balloon is inflated to about 3 cm in length at the end of the remaining end.

2. Fold the balloon in half, and tie the air valve and the remaining end of step 1 together to make the balloon become an end-to-end ring.

4. After twisting, it becomes two rings, which is a bit like a bow. The place where we just twisted is called the "pivot point".

5. Press the midpoint of the balloon ring on one side of the pivot point to the pivot point, and then twist the "midpoint" and "pivot point" together.

6. Now your balloon looks like this, with two small rings and a large ring.

7. According to the method in step 5, the midpoint of the large ring is also pressed to the axis point, and then twisted together to become four rings.

8. These are the 4 rings. Tidy them up and make them look like petals. Next, let's learn how to make flower stalks.

9. Inflate the green balloon to about 3 cm at the end of the balloon.

10. First make a basic twist about 3 cm long at one end of the air nozzle. If you're just learning to twist balloons, what is basic twisting? See: A few basic ways to twist a balloon.

11. After the basic twisting is completed, tuck it into the finished petal pivot point. Basically, it becomes a stamen.

12. Arrange the petals again to make them symmetrical and natural.

13. Make a "fold twist" about 10 cm below the petals. For students who don't know what folding and twisting is, please refer to the article "Several Basic Twisting Methods for Long Balloons".

14. This fold twists to construct a leaf. We're going to have to twist out two leaves.

15. In the same place, another fold twist is made to form a second leaf. And just like that, a flower is ready. Of course, in festive festivals, in addition to twisting flowers, you can also twist the joyful clown hat to disturb Tanzi.

Prepare materials: two yellow balloons, four black balloons, one touch and a long balloon.

1. Use two yellow balloons, one large and one small, tied together to make the body of a bee.

2, then take out 4 black balloons, blow them smaller, and tie them together to make a symmetrical structure.

3. Install the black balloon between the two yellow balloons.

4. Take a long black balloon and inflate it.

5. Start making the wings of the bee and tie the ends together.

6, made into a pair of large wings, looks like a number 8.

7. Attach the wings to the body and body.

8. Take out the round black sticker, take two pieces and paste them on the small yellow balloon, and then use a black marker to draw a curved mouth and eyebrows.

Here's how to do a simple balloon shape:

Tools Ingredients: A long inflated balloon with a diameter of 2 inches and a length of 60 inches.

1. Inflate the long balloon first, and leave a length of about 4cm at the end of the balloon without inflating.

2. Fold the long balloon in half from the middle part, and then fix the balloon and tail part together using the knotting method.

3. Twist the two balloons close to the middle fold part of the three-thirds, twist one third, turn it into three sections, and then put the three rings side by side.

4. After placing them side by side, grasp the twist points of both parts with your hands facing upwards.

5. Then the other hand presses each ring from the bottom to the top and the corresponding point of the twist place, so that one ring is pressed in half to make two petals, there are three rings in total, so six petals will be formed.

6. Twist the left and right petals in the above picture towards the center store, separate the shape of each petal, and after fixing, the petal-shaped balloon is made.

Easy Balloon Modeling Tutorial**:

Materials: balloons, cotton thread (any color you like, wool or other threads), white glue, brushes, scissors, hair styling spray, a bucket or porcelain bowl (a material that will not stick to the glue).

Styling one

1. Inflate the balloon and tie it tightly when it is the size you need.

2. Start from the middle of the balloon around the wide beam line, there is no need to have any special rules, up and down, left and right, as long as Qiaochun can go around the balloon and can't fall down, all the way around the balloon, and finally find a place to stuff the thread head into.

In the first step, you can also adjust it: soak the thread evenly in white glue first, and then wrap it around the balloon).

4. Let the balloon stand for a day or two until the yarn dries and forms, then puncture the balloon, let the balloon slowly suffocate, and then carefully pull out the balloon skin. (It can be hung up to dry, or it can be placed on a jar with a wide mouth that won't stick).

5. Cut out a small opening, spray the setting spray and then reinforce it.

6. Finally, put in your favorite decorations, and a cute egg-shaped cottage will become the rabbit's new home.

Styling two

The first two steps are the same as the first model.

3. Soak the whole balloon in white glue.

4 After drying, pop the balloon and take it out.

Balloon + white glue + lace or cloth, the method is more simple and simple, but the finished product looks taller. Draw the shape you want on the balloon, stick the lace or cloth sheet with white glue to the balloon (or brush the glue on the balloon, and then stick the piece on it), let it dry, puncture the balloon and take out the balloon, hang it up and turn on the light to see. It can be made into a lampshade for ceiling lamps.

It can also be placed on the table.

When shopping, I often receive a lot of leaflets, and there is no place to put expired magazines? So, fold them into long strips, coat them with glue, roll them into a spiral, and then stick them to the balloon, dry them to remove the ball skin, dazzle, don't you?

Here are the steps to make a balloon shape using a paper cup and a chason line:

1.Prepare paper cups, thread, and pumps.

2.Use a pump to flatten the paper on the edge of the mouth of the paper cup.

3.Fold the middle of the paper into the lower draft.

4.Pair the pieces of paper from two paper cups together to form a funnel shape.

5.Tie the bottom center points of the two paper cups together with a thread.

6.Flip the cup over so that the bottom center point is facing up.

7.Bend the bottom of the cup downwards with your hand to form the shape of a balloon's key branches.

8.Tie the bottom tightly with a thread.

9.Turn the top of the paper cup outward with your hands to become the handle of the balloon.

10.Draw a pattern or pattern on the surface of the balloon with a line.

Once you have completed the above steps, a simple balloon shape is complete.

Balloons can be made into five-petal flower balloons, hearts, lollipops, and various animal shapes.

1. Five-petal flower balloon shape. The five-petal flower has the symbol of five blessings, and it takes 5-6 balloons of two colors to make a good roll, with one color for the petals and two colors for the stamens. Evenly sized balloons of the same color are glued into a closed circle with double-sided tape, 4 or 5 balloons.

Paste another color onto the petals, and finally stick to each balloon on the petals to prevent it from cocking.

2. Heart-shaped balloon shape. Fill the round balloon or heart-shaped balloon prepared by the quasi-orange socks with a uniform size, and tie the tail inflatable port with a dead knot after filling the air to prevent it from leaking. Place the inflated balloons on the table or floor in a heart-shaped pattern, use double-sided tape to glue each balloon, and paste the balloons in the order of the placed shapes to avoid destroying the shape.

3. Lollipop balloon shape. Choose two color long balloons, take the length of about five centimeters on the two tops, and then twist the five centimeters into the shape of an ear and connect them together. Then take the length of five centimeters of one of the balloons and twist it into the shape of an ear and place it between the two ear knots in the previous step.

Finally, it is looped along the middle of the ear knot and then fixed, and so on twice in turn.

4. Animal shape round beat. Inflate the balloon, leaving a tail of about 8 cm. Then continue blowing until the air expands and the tail end is about 8 cm away, stop blowing and tie the balloon in a knot.

Starting with the knotted part of the balloon, three basic twists are made, and the four sections of the balloon make the dog's head, neck, legs, and tail.