Why doesn t the computer perform the screensaver settings, and lock the screen by itself after a few

Updated on technology 2024-07-23
10 answers
  1. Anonymous users2024-02-13

    If it automatically shuts down or standby without operation, it may be a problem with the settings. Right-click on the desktop to select Properties Screen Saver Power Supply Power Usage Scheme. 1. Click the drop-down list to select:

    Home Desk sets the list of Monitor Off, Hard Disk Off, System Standby, and Never by Apply. 2. Click the drop-down list to select: "Demo" will turn off the monitor, turn off the hard disk, system standby, and set the list of these three contents to "never" by applying.

    3. Click the drop-down list to select: "Always on" to turn off the monitor, turn off the hard disk, system standby, and the list of these three contents is set to "never" and press Apply. 4. Click the drop-down list:

    Portable "Pocket-sized" sets the list of turning off the monitor, turning off the hard disk, and system standby to "never" by application (the above is to disable the time of turning off the monitor, turning off the hard disk, and system standby, you can also set the waiting time to be longer, not all the options in the power usage plan mentioned above are set, you can choose one type of setting).

    Win7 (Open Control Panel --> System & Security --> Power Options --> there is a power button option on the left).

  2. Anonymous users2024-02-12

    Right-click on the desktop, then click Properties....Then you can find the screen protector...

  3. Anonymous users2024-02-11

    Question 1: Set up the computer desktop to lock the screen automatically, why not lock the screen automatically You can try the following operations:

    1.Set the time setting value to a smaller value.

    2.Tick "Use password protection when recovering".

    3.Click "Apply" (it is recommended to click the buttons to apply first, rather than "OK").

    4.Click OK.

    Question 2: The computer is set to automatically lock the screen Why don't you let it lock automatically Eh, you should right-click on the desktop to select properties, and then open the screen saver tab, and remove the "check sign......" in front of "return to the welcome screen when returning".

    Question 3: How to set the computer screen not to lock automatically Set the computer screen not to lock the screen automatically.

    Open the Control Panel.

    Tap Power Options in small icon mode.

    On the right side, click Change Computer Sleep Time.

    Enter the following interface, where you can simply set the brightness, time, sleep, and lock screen of the computer display.

    Tap Change advanced power settings.

    Open the following interface and take the high-performance power mode as an example to set the lock screen of the computer.

    Drop-down display, after this time, the display dims and clicks, you can set the brightness of the display to be automatically adjusted.

    Select Tap to turn off the display after this time, and set the time to turn off the display to set the screen not to lock automatically.

    Question 5: How to set the computer to automatically lock the screen when there is no action? Turn on screen saver (set a password).

    Problem 6: My computer win7 system will not automatically lock the screen - - the screen lock occurs when you come back from the screen saver or sleep, if you don't set one of the systems is not automatically locked;

    How to open it: Right-click on the desktop >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >> >>

    If you want to lock the screen manually, Win+L keys will do.

    Question 7: How to cancel the automatic lock screen of the computer Very simple, in the control panel - power - select the current power plan to change the plan settings - just look at the screenshot, set the time of the automatic sleep lock screen - select never. ok。

    The above is the operation interface of win7. XP is much the same. Ha.

    Don't ask me win98,So antique system,I forgot to operate the entrance.。 Hopefully, it's hard to take screenshots.

    Question 8: How to set the laptop standby not to automatically lock the screen Control Panel > Hardware & Sound > Power Options > High non-energy-saving options, never sleep.

    Question 9: Why does the computer automatically lock when not used for a long time Change in the system settings, 1 right-click the mouse properties 2 click on the screen saver 3 cancel the screen saver and reply is to use the password option.

    Question 10: How do I make my computer screen not lock automatically in the Control Panel --Power Options--Change the Computer Sleep Time--Put the Computer to Sleep--Select Never.

  4. Anonymous users2024-02-10

    Summary. Hello, the automatic lock screen function is built with the system, if your computer has set up a smart lock screen, but it just doesn't start, then this is a system problem, you can try to fix the system, if it doesn't work then it is recommended to reset the system.

    The computer has an automatic lock screen, but it never works.

    Hello,The automatic lock screen function is the system or spring comes with,If your computer has set up a smart lock screen,But it just doesn't start,Kaiju then this is a system problem,You can try to repair the system,If it doesn't work, then it is recommended to reset the system。

    It is also possible to see if you switched accounts when you log in, or it may be caused by what desktop software you have installed.

    If you can't determine the situation after installing too much software, it is recommended that you back up your important data, reset the system, and hope.

    What is a smart lock screen.

    I've tried everything I can try online, but I can't lock the screen automatically.

    The computer's can only be built with the lock screen system, and there is also one with the help of software.

    The system comes with, the system comes with the failure, that is, the system file is missing, redo the system, there is no other good way.

    It is recommended that all software that is not in the third party should not be installed with a c disk, or it may be that the foot elimination of Changben without a network filing is added to the trust zone from the antivirus software, which conflicts with the original system and is directly covered.

    Does a missing registry affect this.

    Probably, the specific situation is not analyzed, and if you have this kind of operation, it is difficult to recover manually.

    Can you restore the registry?

    The simplest and most effective way is to back up important shirt modules and redo the system, many systems on the market come with plug-ins, and it should be possible to solve the problem by making a relatively clean system without a plug-in.

    Isn't there any other way.

    Stubborn Trojan virus,It's not easy to identify,Each system is different,Land book such as win7,There are several kinds of Wang Xiwan on the market.,The attached boring files are not very the same.,After the Trojan is covered with the same as the source file.。

    You can also go in from the control panel, battery management, see if the low power mode is set, if there is no problem, go and redo the system.

  5. Anonymous users2024-02-09

    Here's how:1. Take the win10 system as an example, open the win10 system settings interface, and click the "personalization" menu setting item.

    2. In the personalization settings page, click the "Lock Screen" setting item on the left side, and click the "Screen Timeout Setting" option on the right side of the page.

    3. In the power and sleep settings page of the pop-up box, set the time displayed on the screen.

    4. Click the drop-down menu, select the time in the drop-down menu, and you can automatically enter the lock screen state if you don't operate the computer during the time period when you are sleepy.

  6. Anonymous users2024-02-08

    Operating computer: HP Star 15

    Operating system: Windows 10

    The steps for setting up the computer to automatically turn off the screen are as follows:

    1. Open the computer, click the start menu on the desktop, find the settings icon button, and click to enter the settings interface. (as shown in the image below).

    2. Select the system function in the interface and click to enter. (as shown in the image below).

    3. Select Power & Sleep, and click the Never belong drop-down menu under the screen settings. (as shown in the image below).

    4. At this time, the setting of setting the screen off time will pop up, and you can set it yourself according to the use case. Once the time is set, the computer will automatically turn off the screen according to the time. (as shown in the image below).

    How to take care of your computer:

    1. Normal shutdown.

    This point is the point that everyone is most likely to ignore, open a lot of background programs in the office, save trouble when shutting down, force shutdown and return posture, will affect the normal reading and writing of hardware, resulting in information loss, and in serious cases, it will cause permanent damage to the hardware, but also to avoid sudden power failure, which will cause irreversible damage.

    2. Maintenance of LCD screen.

    The computer LCD screen is also very expensive, it is recommended to turn on the power-saving mode, the computer will automatically turn off the screen when not in use, which can not only save power, but also extend the life of the LCD screen. At the same time, you can apply the LCD screen film to avoid scratches, for patients with obsessive-compulsive disorder, I don't know if I will change the screen directly when I see a little scratch, and at the same time, it is recommended to use a special cleaner for daily wiping and cleaning.

    3. Avoid vibration when using.

    The computer should try to work on a flat table or platform in daily use, and remember to handle it gently when moving, to avoid bumping, if it is easy to bump the most serious consequence is to damage the hard disk, so try to be equipped with a special notebook bag, because the special notebook bag has been treated with shock absorption, which can effectively protect the safety of the hardware.

    4. Clean the keyboard regularly.

    After a long time, it is inevitable that there will be clutter inside the keyboard, which may cause the keys to get stuck over time. The keyboard can be cleaned regularly with a gentle brush or with blue rubber. <>

  7. Anonymous users2024-02-07

    There are a few main reasons why your computer automatically locks its screen:

    1.Security: Auto-lock ensures that your computer is protected while you're away, as only you know the password or have your fingerprint to unlock it. This prevents others from accessing your personal or sensitive information.

    2.Energy saving: When the screen is locked, the computer goes into standby or hibernation, which can save energy and battery life. This is especially important for laptops and mobile devices, as they often have limited battery life.

    3.Privacy: The auto-hoist lock screen prevents other people from accessing your computer or viewing the tasks you're working on when you're not present. This is especially important in public places or office settings to prevent others from prying eyes on your screen.

    While auto-lock screen can seem a bit of a hassle at times, especially if you're only away for a short while, it actually provides better security and privacy protection. If you wish to disable automatic screen lock, you can do so in your computer's settings, but keep in mind security and privacy risks.

  8. Anonymous users2024-02-06

    Here are some things you can try:

    1.Set the time setting value to a smaller value.

    2.Tick "Use password protection on recovery".

    3.Click "Apply" (it is recommended to click the buttons to apply first, rather than "OK").

    4.Click OK.

  9. Anonymous users2024-02-05

    There's a program running or the time isn't up.

  10. Anonymous users2024-02-04

    Your lock screen time hasn't come yet, if you want to adjust it, go to - Properties - Screen saver - there is a waiting time inside, the right side is the password required after waking up, you can set it according to your needs.

Related questions
9 answers2024-07-23

After changing the screen protector, the fingerprint recording cannot be completed, then the screensaver film is unqualified, which hinders the correct identification of fingerprints by the fingerprint recognition module.

4 answers2024-07-23

The command is wrong!! shutdown l is logged out! It should be shutdown -s >>>More

29 answers2024-07-23

If you want to set up no jump ads, you can not log in to your members, if you are a general member, it will automatically help you jump out of the ad, if you don't log in to the member, there will be more than 100 seconds of ads before the **.

12 answers2024-07-23

1. Open the main page of the Windows system control panel, find the "Power Options" menu, and click to enter the settings page; >>>More

38 answers2024-07-23

It should be able to be installed!! Yes, the dual graphics card is to play its role under win7,Now win7 is still quite mature,If it's just to play, win7 is a good choice,The picture is very beautiful,It's comparable to Mac。 If you want to do programming and other things, try to still XP, and the compatibility of many software should be good!! >>>More