Help, where is there a car dent without a trace repair

Hello, you said that in this case, it is recommended to go to the car beauty shop and take a look, they have special tools.

Body dents without paint can be repaired without a trace.

Compared with sheet metal painting, the dent without trace repair technology can repair the car depression while retaining the original car paint, which solves the problem of many car owners who love the original car paint.

However, the indentation without trace repair technology is very powerful, but there are also restrictions on its use, such as the paint on the sunken part has not been damaged and has not been repaired. In addition, if the depression is very close to the edge of the body sheet metal, or if the rear fender of some cars is a double-layer design, it is not suitable for non-marking repair.

Precautions for the repair of non-marking depressions:

After a scraping accident occurs in a vehicle, you should immediately choose a more suitable place to park. After parking, tighten the hand brake, cut off the power supply, and turn off the engine of the car. In specific cases, the regulations of specific circumstances should be observed, such as wide lights and tail lights should be displayed at night.

On highways, hazard warning signs should also be set up behind the car according to regulations.

Check the condition of your vehicle. It is appropriate to use digital tools to record the situation on the spot. For example, the camera function of the mobile phone and the digital camera carried with you can record the scratch parts and the condition of the car.

Usually, it is necessary to shoot the front side of the car, the rear side of the car, and the bump parts from multiple angles. It is best to have a shot in the footage that reflects that both parties are at the scene.

For paint-free car dent repair, we may have a misunderstanding, here I popularize science, the so-called car dent repair technology is also known as micro sheet metal, we sometimes call it traceless non-destructive technology, etc., anyway, there is no need to destroy the original car paint for body concave repair, the principle is actually very simple, that is, based on optics and mechanics, the use of the lever principle to slowly restore the different depths of the pits to the original appearance (similar to the factory reset of mobile phones), look at the following picture you can see at a glance.

Everyone thinks that this technology is very simple, it is really easy to enter the industry, it is really difficult to really do a good job, the market is still in a downturn in the country, many people do not understand this technology, and there are many people who rely on the gourd to draw a scoop, coupled with the early closed repair, so that the industry is very limited, the car depression repair technician who is really called a master master, is one of the few in the country, after all, each master has different requirements for himself, and the repair effect is good and bad. It is not a matter of time before what is really repaired is the same as the original paint, it is experience and understanding. Therefore, when you repair, you must choose a well-known local car dent repair shop, small shop, backpacker, and really repair the general.

The prospect of learning car traceless repair technology is still good, because now the sheet metal paint is strictly checked, so the car traceless repair technology conforms to the development of the environmental protection situation, and now many private cars are very valuable, the body appears a small depression, and they are generally unwilling to paint, so the car traceless repair technology will become a demand in the automobile service market, but at present, China's car maintenance masters who can fully master this technology are really few, and even there is a situation where supply exceeds demand. Therefore, it is still very good to learn the technique of repairing the dent of the body without leaving a trace.

Automobile traceless repair technology belongs to a profitable technical project, because you only need to bless the tuition fee of learning technology and the cost of purchasing a set of tools, and the repair cost of the later renewal process is basically zero, so the technology is very profitable. I'm worried that I can't make any money. However, Huang Pineapple suggests that if you run your own store, you can also master the windshield repair technology by the way, which can increase the strength of your store and increase your income.

It depends on how easy it is to live. Usually the sheet metal will be sprayed again, and the two are generally counted together. For general grade cars, the door is an example, and the small sheet metal and painting fee is about 400 yuan.

Traceless repair is actually micro sheet metal, the principle is actually very simple, is based on optics, mechanics, the use of lever principle from the inside of the pits of different depths to slowly restore to the original appearance, the repair effect depends on the master's technical level, if the technology is strong, there is no problem from the front, for the individual the benefit is that the traceless repair does not need to destroy the original car paint. Hope to adopt, thank you!

1. Go to the repair shop to practice a lot, but you should choose a good repair shop with a big business to learn faster, the best master will take the initiative to teach you how to repair, why do you want to repair it like this, although the shop often works overtime, but it takes more time to do it alone, and it learns quickly, so it is very important to find a good repair shop and master, so it depends on luck.

2. If you want to learn, you can actually go to the training school to sign up for a short-term class to learn faster, this kind of learning can be started directly, and you don't need to be an apprentice in the repair shop to slowly boil, whether it is to find a job or start a business and open a shop, it will be faster and more convenient.

This belongs to the sheet metal project of car beauty, like our side has a separate project of learning, a professional team of teachers and facilities and equipment, you can get started quickly, you can consult and understand. With the gradual increase of motor vehicles, especially private cars, an auto beauty maintenance industry known as the "best industry" has made more and more people pay attention to it. At present, the booming auto market will surely drive the rapid development of the auto beauty service industry, and the auto beauty industry has become an industry with considerable investment value.

If the body is depressed and painted, it is recommended to paint sheet metal, about 300 to 500, but if there is no paint off and you are very concerned about the original paint, you can try the paint-free car dent repair technology, no need to destroy the original car paint for body concave repair, the principle is actually very simple, it is based on optics and mechanics, and the use of the lever principle to slowly restore the pits of different depths to the original appearance, look at the following picture You can see it at a glance.

Similar to the one in the picture, it is generally about 300 yuan.

The picture below is the repair effect of our sharkskin car dent repair direct store**, the first one**The black border area on the left is the appearance of the original painted body, and the right is the appearance of the body after repair, how can you feel the specific effect, but after all, there are so many stores in the country that the car dent repair can not be generalized, so I recommend that you still go to the regular brand store to repair, so that the technical level will be *** and**fixed, unlike small shops, which will only shout prices all over the sky.

Hello car owner, if a slight depression appears in the plastic part, you can try to press it out by hand, and if you can't press it out, you need to heat it up and then treat it, and then the metal part can only be polished with surface paint, and then re-painted to repair.

If the car is slightly dented, you can consider the decoration store to use a special suction cup to suck it out, that is, non-destructive repair, will not damage the original car paint.

No matter how concave the sheet metal is knocked out, it is useless. It should be a striking mark. Even if you pull out the paint, you will be hurt. So spray paint is inevitable, unless it's a god... Because I'm a lacquer worker.

Slight dents in your motor vehicle are repaired by sheet metal, which can be sucked by special equipment.

Hello, if the car has a dent, this needs sheet metal painting treatment to repair.

Hello, you can find a bigger car beauty shop, they have a professional dent repair. No sheet metal painting, new technology. It's still very good!

Hello, this one needs sheet metal painting, generally speaking, a surface needs about 200-300.

If the car has a slight dent, it is recommended to treat it by waxing, and if the dent is severe, it is recommended to treat it with sheet metal.

Slight depressions can be dealt with in the store, if the plastic can be tried to see if it can be ejected, if it is not heated, you can only go to the store to deal with the metal.

Hello, slight dent repair can be directly pulled out with that kind of suction cup, or you can go to the repair shop for non-destructive repair.

Hello, if the vehicle is slightly dented, it can generally be repaired by sheet metal painting.

Hello, if the car has a slight dent, it is recommended to go to a professional paint shop for painting.

Hello, this situation should be solved in the repair shop or 4S shop after the sheet metal repair is polished and painted.

When the car has a small depression, the most traditional treatment method is sheet metal, whether it is a large depression or a small depression, it can be used. Although sheet metal repair is more expensive, the effect is the best. Car owners can also buy a car dent repairer to try to fix it.

Hello, this situation needs to go to the local repair shop to find a professional master to help you beautify it and see if you can deal with it.

The seamless repair of the vehicle and the dent repair of the vehicle is a meaning, without destroying the paint of the vehicle, you can restore the appearance of the vehicle to its original state, especially for the craters and hail craters where the collision occurred, the effect is very obvious, and it is repaired by hand with professional tools.

Car dent repair ** bright time.

It was invented in the United States in 1946 and came to China in 1999. It is a related technology imported from South Korea, and the Korean technology is imported from Japan. Compared with traditional sheet metal repair, car dent repair is very different.

The paint surface is not damaged, and no traces are left after repair.

How to charge for car dive repair.

The charging standard is calculated according to the specific repair surface difference and location. The larger the area, the more complex the location, and the higher the charge**. Although the ** of dent repair will be higher than that of traditional sheet metal repair, the benefits to the vehicle are also very good, and there will be no depreciation after the vehicle is sold.

Millions of car purchase subsidies.

Summary. Hello, I have seen your inquiry, please wait for a moment and answer it for you immediately.

Hello, I have seen your inquiry, please wait for a moment and answer it for you immediately.

Can this be done without a trace?

Does not damage the original paint.

It looks like it's not okay, can you see it when you're done?

The area is not large, can't it be restored?

Why can't it be done.

Redo the lacquer. Most people can't see it, because the deformation is more serious.