What is the market for automotive dent repair technology?

Traceless repair is actually micro sheet metal, the principle is actually very simple, is based on optics, mechanics, the use of lever principle from the inside of the pits of different depths to slowly restore to the original appearance, the repair effect depends on the master's technical level, if the technology is strong, there is no problem from the front, for the individual the benefit is that the traceless repair does not need to destroy the original car paint. Hope, thank you!

This belongs to the sheet metal project of car beauty, like our side has a separate project of learning, a professional team of teachers and facilities and equipment, you can get started quickly, you can consult and understand. With the gradual increase of motor vehicles, especially private cars, an auto beauty maintenance industry known as the "best industry" has made more and more people pay attention to it. At present, the booming auto market will surely drive the rapid development of the auto beauty service industry, and the auto beauty industry has become an industry with considerable investment value.

By 2018, although the entire market is not saturated, but the competition in individual cities has been very fierce, such as the cities where the technology was introduced earlier, Beijing, Changchun, Harbin, has been saturated, but the third and fourth tier cities, the current space is relatively large, especially in the areas below the city There is no such technology, from north to south, from east to west The density of merchants has decreased, Yunnan, Guizhou, Sichuan, and other southern provinces and cities, the technology has not yet spread, but it can be believed that in the next five years, the car sinks, Restoration technology will surely be found in every city in China.

Car dent repair is time-saving and efficient, it is an emerging and popular technology for the majority of car owners, without sheet metal painting, and retains the precious original car paint! Naturally, you can't go wrong with good technology prospects.

1. Go to the repair shop to practice a lot, but you should choose a good repair shop with a big business to learn faster, the best master will take the initiative to teach you how to repair, why do you want to repair it like this, although the shop often works overtime, but it takes more time to do it alone, and it learns quickly, so it is very important to find a good repair shop and master, so it depends on luck.

2. If you want to learn, you can actually go to the training school to sign up for a short-term class to learn faster, this kind of learning can be started directly, and you don't need to be an apprentice in the repair shop to slowly boil, whether it is to find a job or start a business and open a shop, it will be faster and more convenient.

For paint-free car dent repair, we may have a misunderstanding, here I popularize science, the so-called car dent repair technology is also known as micro sheet metal, we sometimes call it traceless non-destructive technology, etc., anyway, there is no need to destroy the original car paint for body concave repair, the principle is actually very simple, that is, based on optics and mechanics, the use of the lever principle to slowly restore the different depths of the pits to the original appearance (similar to the factory reset of mobile phones), look at the following picture you can see at a glance.

Everyone thinks that this technology is very simple, it is really easy to enter the industry, it is really difficult to really do a good job, the market is still in a downturn in the country, many people do not understand this technology, and there are many people who rely on the gourd to draw a scoop, coupled with the early closed repair, so that the industry is very limited, the car depression repair technician who is really called a master master, is one of the few in the country, after all, each master has different requirements for himself, and the repair effect is good and bad. It is not a matter of time before what is really repaired is the same as the original paint, it is experience and understanding. Therefore, when you repair, you must choose a well-known local car dent repair shop, small shop, backpacker, and really repair the general.

Traceless repair is actually micro sheet metal, the principle is actually very simple, is based on optics, mechanics, the use of lever principle from the inside of the pits of different depths to slowly restore to the original appearance, the repair effect depends on the master's technical level, if the technology is strong, there is no problem from the front, for the individual the benefit is that the traceless repair does not need to destroy the original car paint. Hope to adopt, thank you!

If the body is dented and painted, it is recommended to paint sheet metal, about 300 to 500, but if there is no paint off and you are very concerned about the original car paint, you can try the paint-free car dent repair technology, no need to destroy the original car paint for body concave repair, the principle is actually very simple, that is, based on optics and mechanics, the use of the lever principle to slowly restore the pits of different depths to the original appearance

The so-called car dent repair technology, also known as micro sheet metal, is sometimes called traceless and non-destructive technology, etc., anyway, there is no need to destroy the original car paint for body concave repair, the principle is actually very simple, it is based on optics and mechanics, and the use of the lever principle to slowly restore the different depths of the pits to the original appearance, look at the following picture you can see at a glance.

Non-destructive repair is limited to the paint is not damaged dents, if the paint and cracks, can only be painted in sheet metal, if only slight scratches and dents, it is recommended that the car dent repair, after all, the original paint is a baby, once painted, the car will immediately depreciate.

Car dent repair is well understood. In fact, it is to restore the recessed part of the paint to its original state, which is called automobile dent repair (called micro sheet metal or non-destructive sheet metal in foreign countries).

Generally speaking, acute and obtuse dents are the kind that can be achieved when repairing car dents.

The main thing is that the depression without paint can be repaired as before, the hail crater can be repaired perfectly, and the corners and AB pillars are not easy to repair.

Diagram of a car dent restoration.

Automobile dent repair technology.

The repair of dents is based on the principles of optics, physics and mechanics, and the principle of levers is used to make the body appear different in size due to various external reasons.

1. Dents of different shades. However, the premise is that the paint surface of the body is not damaged and the metal surface is not stretched too much. The technology of repairing car dents can be said to be a modern technology.

Automobile dent repair technology is an international advanced technology, which is used to repair various dents formed by external forces in various parts of the automobile appearance. This technology also significantly reduces the repair time (about 20-40 minutes to repair a dent) and the cost (only about 50% of the traditional sheet metal and painting).

Moreover, the recessed areas restored by this technology will never be deformed and faded, completely allowing the car to show its original elegance again. Whether it is the door mechanism cover, front wing, rear hatch cover and other 'dents' produced in various countries around the world, the repair range is more than 90%.

What are the car dent repair tools? What are their functions?

1.Tools like crowbars.

The role of the crowbar in the repair process is to restore the dent to its original state by raising it. It is mainly used to push out the sinking steel plate from the inside out. This technique must be delicate, and little by little fine-tuning is the key.

Otherwise, frequent and substantial movements will destroy the original stress and toughness of the steel plate, and even cause greater body damage and paint damage.

2.Rubber hammer.

This tool is no different from an ordinary hammer, except that both ends of the hammer are made of rubber, which can act as a hammer and will not hurt the lacquer surface. It is mainly used to repair the overall shape by striking from the outside in.

3.Pointed. Throughout the restoration process, things like pencil tips are used heavily. Because the texture is harder and the tip is sharper, it can obtain a lot of pressure, which plays a great role in the fine-tuning and prominence of the bumps of the body.

Advantages of car dent repair.

1. Low maintenance cost.

2.Short repair time.

3.There is no effect on the residual value of the vehicle.

Car dent repair defects.

1.The rear wheel eyebrows, corners, and AB pillars are not easy to repair.

2.Damaged paint is irreparable.

3.This technique has a smaller range of applications.

Car dent repair**.

Many friends are concerned about the repair of car dents. In fact, if the charge is relatively reasonable in the case of speed advantage, it is definitely something worth recommending.

Car dent repair is a simple and easy-to-understand repair technique. Its main purpose is to restore the recess on the surface of the car paint to its original state, also known as automotive micro sheet metal or non-destructive sheet metal repair (foreign name). Usually the dents of the convex and obtuse corners can be restored to their original state, while the parts of the depression that have not been painted can be repaired perfectly, and the hail holes can also be removed, but the corners and AB pillars are not so easy to repair.

Based on the principles of optics, physics and mechanics, the automobile dent repair technology uses the principle of lever to restore a variety of dents of different sizes and shades formed by external forces. This is provided that the paint surface is not damaged and that the metal surface is not overstretched. This technology is a modern technology and an international advanced technology, which is used to repair the dents formed by external forces in different parts of the appearance of the car.

The repair time is very short (about 20-40 minutes), the cost is greatly reduced (only about 50% of that of traditional sheet metal and painting), the remediated depression will never be deformed or faded, it can be completely restored to its original state, and the car will be able to show its elegant beauty again. Whether it is doors, mechanism covers, front wings, rear hatches, etc., can be repaired within more than 90% of the range. Car dent repair requires the use of different tools.

For example: use a crowbar to restore the dents to their original state, use a rubber mac for overall styling repairs, and use a pointed tip to fine-tune and emphasize the bulges. Repair**Varies by vehicle type, scar size, and repair time.

Although there are some drawbacks in the car dent repair technology, such as the inconvenience of repairing the rear wheel eyebrows, the corners of the stupid bucket and the AB pillar, its advantages are obvious: low maintenance costs, short repair time, and no impact on the residual value of the vehicle. If you need to repair the appearance of the car, the car dent repair technology is a highly recommended technical option.

Of course, the repair of car body depression is reliable: 1, everyone thinks that this technology is very simple, it is indeed easy to enter the industry, it is really difficult to really do a good job, the market is still in a downturn in the country, many people do not understand this technology, and there are many people who rely on the gourd to draw a scoop, and then Qiaotan plus the early closed repair, so that this industry is very limited, and the car depression repair technician who is really called a master is one of the few in the country, and the car depression repair technology is generally repaired by the master. There is no problem from the front, and when the light is strong, a slight depression can be seen from the side;

2. Under the strong light, it can be seen that the lacquer pattern arrangement of the depression has changed. The master with the highest level of technology, except for the naked eye, can not see any problems, the repair of the place of lacquer arrangement, and spacing are the same. Therefore, the most practical method is to move back and forth from the sunken side eyes under the illumination of the lampboard sedan wide shirt to observe the direction of the lacquer pattern and whether it is evenly arranged;

3. Therefore, the car dent repair ** is not simply related to the situation of the dent itself, but also related to the ability of the repair master, so don't blindly pursue low-cost repair of the dent, the most important thing is to see the effect! After all, each master has different requirements for himself, the repair effect is good and bad, and the real repair is the same as the original car paint, it is not a matter of time, it is experience and understanding. Therefore, when you repair, you must choose a well-known local car dent repair shop, small shop, backpacker, really closed-minded is unreliable, and the asking price is not low.

Millions of car purchase subsidies.