The sewer is often blocked, do you need to go through the pipe alone?

Updated on society 2024-07-03
12 answers
  1. Anonymous users2024-02-12

    When the sewer is blocked, all the dirty water upstairs is discharged directly through the interior of the second floor, and the filth directly soaks the floor. Sewer dredging doesn't cost much, but breaking the renovation is not a small loss, so owners with low floors are the direct victims.

    In fact, the blockage of the main pipe is the common responsibility of everyone, the result of common use, the old community is basically the most of this kind of problem, most of the old community is built with cast iron sewer pipes, long-term use of internal corrosion and aging, rust makes the internal diameter of the pipe smaller, plus the waste of toilet and kitchen sewer is too large, can not reach the drainage flow should be jointly responsible for everyone. If you don't want to do it upstairs, you can find someone to seal the sewer pipe of your home, and the water will gradually spread upwards in a few days.

    <>I think that the kitchen drainage, a corridor needs to be cleaned up, after all, the kitchen drain drains a lot of grease, blockage is inevitable, there is no fault of anyone to cause, everyone is using, the cost is not much, the neighborhood harmony is more important. The sewer is blocked, the whole unit should pay for dredging, the sewer pipe is just passing through on the first floor, and the low-rise residents are unlucky after the sewer is blocked, who wants to pee at home. If the septic tank is full and cleaned up with a special sewage pumping truck, the whole building will have to pay for it.

    Therefore, we must have a good relationship with our neighbors, and everyone understands and helps each other. Whoever has something to do is helping others and helping themselves. As the first floor, you should also pay attention to not asking for money for a block, distinguish the situation, and discuss with everyone to solve it.

    Because all the residents upstairs shed dirty water to pass through the pressure on the first floor can not be blocked, tear more than 30 centimeters of long cloth strips, and then use small sticks to stuff into the sewer one by one, until the blockage is tight, the cloth head is 10 centimeters outside, and so that it is good to drag it out, so that the upstairs will know, this kind of thing is basically useless, you have to experience it yourself. The water pipe can flow into the sewer because the sewer pipe is a shared water pipe! If the water supply on the first floor is broken, the upstairs residents will not be able to use the water, which is a reason.

    I hope that the residents on the same side of the unit will be right to share it!

  2. Anonymous users2024-02-11

    Of course, pipes are needed, because this approach can be better linked, which is very good for us, and the sewers can be smoother.

  3. Anonymous users2024-02-10

    I think it's okay, because if the sewer is blocked, then it may cause a sewer to overflow, and the impact on your home is still very bad, so if you know that the sewer is often blocked, then you must go through a single pipe to unclog the sewer.

  4. Anonymous users2024-02-09

    You need to go through the pipeline alone, because there are many reasons for the blockage of the pipeline, so it is also a good choice to go through the pipeline alone, so that it will not be blocked again in the future.

  5. Anonymous users2024-02-08

    I don't think it's necessary, regular dredging is fine, such as putting some decomposition agent, or don't emit foreign matter, if you go to the transformation, it will be too costly.

  6. Anonymous users2024-02-07

    If the economic conditions allow, I think it is better to have a separate pipeline, and if the economic conditions do not allow, you only need to find a worker to make certain modifications to the pipeline.

  7. Anonymous users2024-02-06

    No, if you don't dredge it, the dirt will pour into the bathroom on the first floor, and the room smells bad.

  8. Anonymous users2024-02-05

    Sewer pipe blockage treatment methods include sewer dredging agent dredging, dredging with spring drain passer, dredging with caustic soda, etc.

    1. Dredging with sewer dredging agent.

    You can mix the water with a sewer unclogging agent and then unclog the sewer according to the method indicated above, which is the best way to deal with sewer blockages. But if you don't want to buy a sewer unclogant, we can use the laundry detergent at home with baking soda and vinegar to unclog the drain ourselves. The method is very simple, that is, first pour laundry detergent and baking soda into the blocked sewer, then pour some vinegar into the bright smile, and finally use the hanger at home to poke it.

    2. Dredge with a spring ditch passer.

    This method is more professional, because the workers we generally see unclogging sewers use such a thing to dredge it. In the same way, we can use the above method to make a cleaner, or we can just buy a sewer unclogant, pour it into the sewer pipe, and then insert a spring drain to stir the sewer back and forth.

    This method is to replace the upper hanger with a spring drainer, because this thing can hook out all the hard objects that cannot be washed away in the sewer due to its unique structure, and this method can be said to be the most stable way to dredge the sewer.

    3. Dredging with caustic soda.

    This method is also very effective, but it should be noted that if it is a plastic drainage pipe, then do not use this method, otherwise it may burn the water pipe. We first boil a pot of boiling water, and then pour the caustic soda into the sewer mouth, and then in the blocked place, the caustic soda will adhere to the dirt. Then pour the boiled water into the sewer mouth and let the water dissolve the caustic soda, so that the reaction that occurs during dissolution can melt all these stains, and then rinse the sewer mouth with a little more water.

    Ways to avoid sewer blockages:

    1. Usually develop a good living habit, don't throw everything into the sewer, you know, some things are easy to cause sewer blockage.

    2. You can make a filter, so that even if you don't pay much attention to it, some large domestic garbage will not go to the sewer.

    3. When washing dishes in the kitchen in winter, you can consider using hot water, which is not only easier to wash the dishes, but also will not block the sewer.

  9. Anonymous users2024-02-04

    How not to block the sewer pipe: 1. A filter screen device should be installed at the drain of the bucket of the vegetable washing sink and should be cleaned frequently. Before washing the dish, remove the grease from the dish and wash it with warm water.

    2. When using water in the kitchen, fill the bucket with water first, and wash the dishes with a large amount of water (it must be noted that after washing the kitchen supplies, the dirty water in the sewer should be put away at one time, so that a certain amount of momentum will be formed to flush the stolen goods in the sewer). Garbage on the pipe wall will not form. 3. When the weather is cold, use boiling water to scald the pipe every three or five days, (if you are not sure that your pipe is of good quality, don't use too high temperature water to scald, so as not to burn the pipe and deform), so as to effectively prevent the blockage of the pipeline, and even avoid the blockage of the pipeline.

    Extended Information [How to Unclog Sewers] Preparation: Baking soda, detergent, vinegar, appropriate amount of water1, sprinkle an appropriate amount of baking soda at the mouth of the sewer. 2. Drop a few drops of dishwashing spirit.

    3. Pour in the appropriate aged vinegar (white vinegar is also acceptable). 4. Let stand for 5 minutes to let these three materials have some chemical reactions. 5. Then rinse off the residual material at the sewer mouth with clean water.

    6. At this time, the sewer mouth is dredged. Note: This method is suitable for simple blockage, if it is a large object or a hard object, please find a professional master to use tools to dredge.

  10. Anonymous users2024-02-03

    Sewer pipes are often clogged due to several reasons:

    1.Too much garbage: The garbage in the sewer includes grease, food scraps, paper scraps, dirt, etc., which can accumulate in the pipes and clog the pipes if not cleaned up in time.

    2.Pipeline aging: If the sewer pipe is aging, the pipe wall will be aging and damaged, which will cause problems such as pipe rupture, corrosion, and fouling, resulting in poor drainage and blockage of the pipeline.

    3.Bad habits: Some people throw mouthwash cups, tissues, combs and other things into the sewer pipe when taking a bath, brushing their teeth, and washing their face, blocking the pipe.

    4.Improper plumbing and closing: Sewer pipes may be clogged if the design of the sewer pipe is not reasonable, such as the bending angle is too small or the pipe length is too long.

    In response to these problems, the following measures can be taken:

    1.Active cleaning: Regularly clean the drain pipes, especially grease, which can be cleaned with professional chemicals or by special machines.

    2.Replace pipes: For aging sewer pipes, they should be replaced in time to avoid problems such as damage and fouling.

    3.Pay more attention: During use, be careful not to throw garbage down the drain and develop good hygiene habits.

    4.Adequate design: When designing sewers, it is necessary to pay attention to the angle of bending and the length of the pipe, so as to make it reasonable and reduce the probability of blockage.

    In short, there are many ways to solve the frequent blockage of sewer pipes, and it must be comprehensively considered to avoid and reduce the occurrence of pipeline blockage from the source, so as to ensure the smooth flow of sewers to the greatest extent.

  11. Anonymous users2024-02-02

    Public sewers play a vital role in urban construction, which can discharge sewage and waste from domestic life to sewage treatment plants for treatment, so as to ensure the environmental hygiene of the city and the health of citizens. However, this system is also often faced with the problem of blockage, which if not solved in time, will have a great impact on the urban environment and the lives of citizens. Here are some common ways to prevent and resolve public sewer blockages.

    1. Preventive measures.

    1.Garbage sorting. When disposing of household garbage, the public should collect hazardous garbage and food waste separately to avoid throwing these garbage directly into the sewer.

    2.Food Residue Disposal. When eating and drinking, members of the public should try to dispose of food residues as much as possible, and do not throw leftover bones and peels directly into the sewer.

    3.Clean up regularly. Municipal management departments should regularly clean up public sewers, remove garbage, sand and other debris in sewers in a timely manner, and reduce the possibility of blockage of waterways with missing stoves.

    Second, the solution.

    1.Physical dredging. Physical dredging is a common way to solve the blockage of public sewers, using professional dredging equipment to physically remove the blockages in the sewers, which can quickly solve the problem of sewer blockage.

    2.Chemical dredging. In some cases, the use of chemical dredging agents can quickly resolve the problem of clogged sewers. When using chemical dredging agents, the public must use them in accordance with the requirements on the instructions to avoid chemical pollution.

    3.Pipe cleaning. For areas with long-term sewer blockages, pipe cleaning measures should be taken. Pipe cleaning removes dirt from sewers and thoroughly cleans sewers to reduce the occurrence of sewer blockages.

    In short, public sewer blockages will have a negative impact on the environment and people's lives, and timely measures must be taken to prevent and deal with them. Members of the public should adopt good habits and avoid throwing garbage and waste directly into the sewer; At the same time, the municipal management department should also strengthen the daily cleaning and maintenance of public sewers, and solve the problem of sewer blockage in a timely manner.

  12. Anonymous users2024-02-01

    Sewer refers to the fixed facility pipeline in or around the building to discharge sewage, waste water, rainwater, etc. to a sewage treatment plant or other suitable treatment site. Sewerage pipes are very important, not only for sanitation and the quality of life for people, but also for the functioning and economic development of the city. However, clogged sewer pipes are a very common problem, what should we do at this time?

    1.Regular cleaning of pipes It is recommended to have sewer pipes inspected and cleaned regularly. Municipal departments or professional plumbing cleaning companies can provide professional services to prevent the accumulation of garbage and debris in the pipes for a long time.

    2.Do not litter human domestic garbage will cause different degrees of blockage in sewer pipes, therefore, we should educate the whole people not to litter, and it is strictly forbidden to dump waste and domestic garbage in sewers at will.

    3.Regular cleaning of sediment sewers also requires regular sediment cleaning, such as grease, scum and so on. Because sediment can affect the smooth flow of sewers, it can accumulate over time and clog pipes.

    4.Reduce the use of food waste into the pipes, and do not throw large pieces of bones, bread crumbs and other substances into the sewer pipes. If you accidentally fall into it, take it out and throw it in the trash.

    5.Avoid the discharge of chemicals and chemicalsSome drugs and chemicals can cause chemical reactions and cause damage to sewer pipes. Therefore, please do not casually dump the medicine directly into the water stream.

    In our daily life, we can protect our sewers and reduce sewer blockages by following the above measures. If the sewer pipes are clogged, we can buy cleaners, unclog the services of a master, or use a household cleaning device to make sure our sewers are clear. In conclusion, sewers are a very important part of our homes, and everyone should pay more attention to sewer cleaning and maintenance.

Related questions
18 answers2024-07-03

The indoor sewage discharge form of many newly built commercial houses is to take the first floor is independent drainage, and the second floor and above are shared drainage. Therefore, the main reason for the backwater on the second floor is the blockage of the main drainage pipe. When the pipes are blocked, the sewage discharged from the upper floors will accumulate, and the sewage level in the pipes will be higher than the floor drain in the room. >>>More

7 answers2024-07-03

1. You can stuff the hose of the pump into the sewer pipe, and then put a small amount of water in the pool, and then continue to pump air into it, and the pipe can be dredged quickly. >>>More

12 answers2024-07-03

The kitchen sink is often blocked because of some meals, when you use your hands to buckle or remove the pipe to clean, you feel disgusting, but it seems to be too big a problem to find someone to clean up, today I will teach you how to easily dredge the pipes! >>>More

4 answers2024-07-03

If the sewer is blocked, the landlord or pay for it yourself, you need to deal with it according to the actual situation. The details are as follows: >>>More

7 answers2024-07-03

It must be to use a water jet to flush the water pipe, and you must clean up the dirty things, such as food scraps or hair.