How to put the printer paper, how to put the printer paper

Printing paper, some can be punched in a row, put it in from the back, but some have to be formatted, otherwise, tear off one by one and put it in to print.

Isn't there an entrance, put it in according to the size, and you will suck it in when you print.

1. There is a button that can be adjusted before and after the lower right of the front of the printer, and you need to break the button to the side away from the printer (close to your side) when setting up continuous printing in the rear

2. Then according to the size of the printing paper, the general triplicate express delivery bill sales order, move the caliper on the left to 10, the proportion has been actually appropriate, and it can be directly copied;

3. Then put the printing paper from the back, the hollow dots on both sides of the printing paper correspond to the solid black dots on both sides of the back of the printer, open the fixed button, and send the printing paper to the front smoothly;

4. After sending the printing paper, fix the buttons on both sides, turn on the computer to try printing, 5. If there is no response after printing, it means that the paper has not been sent to the place, this is to adjust the front button to the side close to the printer (front paper) and continue to send the paper smoothly, repeat the operation several times, and you can do it;

6. After the test is successful, the part of the printing paper exposed on the outside should not be too much, which can be straightened back smoothly with both hands to control the distance of the paper;

7. Then the list printed out by the printer is centered, clear and beautiful.

Here's how:Device: HP printer.

1. Generally, the paper tray of the printer is under the host of the printer, and the pull switch of the printer paper tray is found.

2. Use the carton switch to pull the carton out.

3. After the entire carton is dragged out, check the layout of the carton.

4. When there is paper in the carton, the paper is sent to the roller by the top of the carton, so the paper should be pressed down.

5. After taking out the paper, you will find a buckle, which is used to jam the paper.

6. The buckle of this paper is adjusted according to the size of the paper. When you need to adjust, press down the elastic plastic ears on both sides of the buckle to adjust.

7. Then adjust the size of the paper in the installed carton according to the size of the paper.

8. After the adjustment, put the paper into the paper box.

9. Press down the buckle on the other side of the paper and clamp it tightly.

10. Finally, push the tray of the carton into the printer.

Take HP M72625dn as an example, you only need to find the paper tray under the printer, adjust the paper buckle after opening, put the prepared paper into the paper tray after adjustment, and press the buckle on the other side of the paper to tighten the clamp, and finally push the tray of the paper tray into the printer. As shown in Fig.

It should be noted that do not drag the paper tray when the printer is working, which is easy to cause paper jams.

Precautions for the use of the printer: After the printer is used for a long time, it needs regular maintenance, which can prolong the service life, do not place sundries above the printer, which may cause the deformation of the equipment shell, do not disassemble the printer at will, if there is a problem, it is recommended to ask a professional to deal with it.

If the paper is damp, there may be no paper, it is recommended that the user directly replace the new paper, it should be noted that if the ribbon card of the word car ribbon card installed with the ribbon rack may be deformed, it may also appear that the paper is not fed, just check the correction.

There are many types of printers, according to whether the printing element hits the paper, it is divided into impact printers and non-impact printers. According to the structure of printed characters, it is divided into full-character printers and dot matrix character printers. According to the way that a line of words is formed on paper, it is divided into serial printers and line printers.

1.You need to use your thumb to find the position of the card slot and press it, only to pull it out.

2.After pulling it open, lift the upper half of the guard.

3.In the inside there is generally a movable ruler, adjust to the size of the model of the paper you need.

4.After the length and width are adjusted, put it directly into the A4 paper.

5.After that, lower the lid on the top half and push the paper into the printer.

1. Press the grooved position with your thumb and gently pull it out with other fingers. 2. After pulling it out, lift the movable groove with your thumb and index finger and lift the upper part3. If the movable ruler inside happens to be in the A4 paper position, directly4. Then gently pull the activity ruler that determines the length until the marked A4 position, and adjust the length in this step. 5. After the length and width are adjusted, put it directly into the A4 paper. 6. Lower the lid on the top half.

Finally, push the printer in.

1. There are two movable clips at the back of the printer, and open the clip first.

2. Then put the holes on the chain paper into the printer, and put at least three holes in the holes of the paper to ensure the balance of the paper, and then close the clip back.

3. Note: There is a button in front of this clip that can be fixed, which can fix these two clips, after the paper is put in, adjust the paper first, and then press the fixed button to ensure that the printing paper will not move left and right when the printer is printed, which will affect the paper feeding effect of the printer to prevent paper jams.

4. After installing the paper, there is a conversion button in front of the printer, which is to convert the dot matrix printing and the forward paper printing, if you take the back feed paper chain printing, you need to convert the conversion key to the chain printing that, there is also an adjustment of the printing scale, the printing scale is to adjust the dot matrix printer, the copy ability of the print head, the larger the number of printing paper layers, the more the copy ability needs to be increased. If the paper is a duplex, adjust it to the 1p 2p position. Pay attention to the manual of the dot matrix printer, each dot matrix printer is similar.

5. Next, look at the front panel of the printer, after the paper installation and other settings are completed, you can go to the panel to try the loading and unloading function, press it, and the paper will be automatically fed.

6. There is a rotating circular button on the side of the printer, which can adjust the length of the incoming and outgoing papers. If the paper comes out too short, less than the dotted line of the paper, so that the paper can't be torn, you can rotate the button to adjust it, on the contrary, if it comes out too much, just rotate it back and let the paper return to the right position.

Printer loading, there are generally two paths, one is like the kind of small new printer, there is no paper tray, then the paper needs to be placed in the manual feeding tray, so the paper will not be too much, generally within 50 sheets. The other is a printer with a paper tray like a collar printer, you need to pull out the paper tray at the lower end, and push the paper tray into the printer after putting the paper, and the paper volume will reach 100-200 sheets.

After the printer finishes putting the paper, select ** on the computer to print.

Preparation tool: Printer paper.

Steps: The first step is to open the printer's paper tray.

The second step is to slide the paper width guide outward to the maximum, which can also be adjusted according to the size of the paper loaded.

The third step is to put the required paper neatly into the tray of the paper drawer.

Fourth, finally stare the width of the paper at the orange guide, slide inward to stop at the edge of the paper, and slowly close the paper feeder.

Precautions for daily use of the printer:

1. In case the printer generates heat.

2. It is forbidden to put other items on the printer. When the printer is not in use for a long time, please remove the power plug from the power outlet.

Pull it out. 3. Just in case, when there is thunder nearby, pull the power plug out of the socket. If it is plugged in, there is a possibility that the machine will be damaged.

4. When the printing paper and color Wuzhi belt box are not set, printing is prohibited. The printhead and print roller will be damaged.

5. The print head is in a high temperature state. Do not touch until the temperature drops. Prevent burns.

Wounded. 6. Do not touch the metal part of the printing cable connector and the print head. Do not touch the print head when it is working.

7. When the print head is working, it is forbidden to cut off the power supply.

1. Take out the A4 paper.

2. Pull open the paper slot by hand.

3. After the paper slot is opened, put in the A4 paper.

4. Press down the A4 paper so that the paper completely enters the paper slot.

5. Push the paper tray back to the Chisun state and buckle it, and the code source makes the paper tray completely closed.

6. After the paper slot is closed, if there is a printing task in the printer, Kaiyuan printing will be automatically started. Once the paper is added, the printer is ready to use.

<>1. Open and run, and the upper right corner is the open button.

2. After entering the operation interface, wait for the warm-up, and when the display is ready, it indicates that you can start printing.

3. Select the paper size, generally A4 and A3.

4. If you have a lot of paper to copy, you can choose the roller type. Place a stack of paper face up on the printer tray and place it neatly.

Then click on the keyboard to start, and the printer will print automatically.

5. Due to the awareness of resource conservation, the figure is only displayed as a piece of printed paper. In fact, this method is used for copying a stack of paper.

6. Only a small amount of data is printed, and scanning type can be selected. Lift the printer cover and place the paper on the glass surface. Make sure that the upper left corner is close to the edge of the ruler, otherwise the copy will be black. Click Start, the printer calls the state to work, and it prints automatically.